1. ELEGANT IIOMES OK 5126H ASSEMBLY INSTRUCTION o 1 INDOOR USE ONLY 2 REPLACE THE BULB AFTER THE BULB GETS COOL es Assembly steps hanere Step 1 Hang crystal gray beads on nut A3 and hang crystal beads Q on nut A4 Step 2 Gently hang beads between two crystal dish It just like M Step 3 Attach threaded tube C through canopy B then screw into nipple Al Secure with finial D Step 4 Attach assembly E to threaded tube 42 Step 5 Screw bulb A7 into socket A5 Step 6 Mount shade F on assembly E and secure with finial loop G Step 7 Screw loop G onto tube I Step 8 Loosen screw J and pass canopy K over tube I Step 9 Tighten loop L onto tube I Step 10 Pass main wire through loop G canopy K tube I and loop L Step 11 Attach each end link H of chain to finial loop G and loop G step 12 Connect wire to the power supply cord Step 13 Raise canopy K to ceiling and secure by tightening screw J Step 14 Hang loop L onto hook on ceiling After completed the above instructions please check once over to ensure safety Then you may turn the power on If external cable or cord is damaged it should be replaced by a qualified person to avoid hazard