none LPAB010 Instructions / Assembly
Contents
1. Cut 1 4 radius on inside wall If two level make additional notches on back of wall 1 2 deep by 2 1 8 so backsplash or finished surface can cover bracket see number 5 in lower image Ww Make sure bracket fits tightly on wall surface and there is 1 16 to top of wall If not remove material in notch until bracket is 1 16 from top surface of wall 4 Attach bracket to wall using 2 9 wood screws one in bottom hole and one in middle hole Mounting Bracket to Wall Single Level Wall Mount Two Level Wall Mount Corbel gee Bracket Adjusting Set Screws and Installing Countertop Reference the numbers below with the diagrams Turn set screws to level end of bracket with other Bracket Length L parts of counter 2 Use a level to confirm end of bracket is level and rg both set screws are equally engaged 3 Turn both set screws additional turns based upon 18 Granite 141 tiok Table 2 This provides support at the end of the 12 Granite 3 4 thick bracket and ensures uniform support of your 6 Lighter materia los 1112118115 specific countertop by preloading bracket Install countertop and apply caulk around perimeter Table 2 Number of set screw turns to preload bracket of bracket under countertop gt End of Bracket 4 Preload N lt lt _cautk Example of 1 Full Turn Contact Information and Warranty CONTACT INFORMAT2. whether oral or written statutory express or implied As permitted by applicable law Sl specifically disclaims any and all statutory or implied warranties including without limitation warranties of merchantability fitness for a particular purpose and warranties against hidden or latent defects If SI cannot lawfully disclaim statutory or implied warranties then to the extent permitted by law all such warranties shall be limited in duration to the duration of this express limited warranty and to repair or replacement service as determined by SI in its sole discretion No SI reseller agent or employee is authorized to make any modification extension or addition to this warranty Except as provided in this warranty and to the extent permitted by law SI is not responsible for direct special incidental or consequential damages however caused To make a claim under this limited warranty contact SI by email to info snyderinnovations com SI must be notified in writing of any claim under this warranty within 45 days of any claimed lack of conformity of the product All warranty claims must be accompanied by a legible copy of the original receipt showing the date and cost of the purchase along with the purchaser s name address and phone number This warranty will be interpreted pursuant to the laws of State of Connecticut By purchasing this product the buyer submits to the exclusive jurisdiction of the State of Connecticut in regard to any disputes
3. ION If you have questions about bracket sizing or number of brackets for your specific countertop overhang please send a diagram of countertop along with a list of questions to info snyderinnovations com INSTRUCTIONS DISCLAIMER Snyder Innovations Inc SI intends to make these installation instructions accurate and complete However SI makes no claim that the information contained herein addresses all conceivable details conditions or variations nor does it provide for every possible contingency in connection with the installation or use of this product The information contained in this document is subject to change without notice or obligation of any kind LIMITED WARRANTY Snyder Innovations Inc SI warrants that the Low Profile Adjustable Bracket LPAB will be free from defects in material and workmanship under normal and proper usage for a period of twelve 12 months from the date of purchase This warranty does not extend to any hardware such as screws or wrenches which may be included in the LPAB packaging If the warranty in the LPAB packaging differs from the warranty policy posted at www snyderinnovations com the policy at www snyderinnovations com shall be considered the most current and in effect The LPAB has an intended purpose If the LPAB is used outside of that purpose the product will not be warranted and SI shall not be held responsible for any damage that may occur due to accident abuse misuse or n
4. acket as a template mark holes and drill 1 8 pilot holes 1 2 deep 4 Make sure bracket fits tightly on wall surface and there is 1 16 gap from top of bracket to top of wall If not remove material in notch or radius 5 Attach bracket to wall using 2 3 4 wood screws one in bottom hole and one in middle hole Option 2 Mounting Bracket to Side of Cabinet Reference the numbers below with the diagram 1 If wall thickness is at least 3 4 notch top of wall 1 4 by 2 1 8 Cut radius on inside wall If wall is less than 3 4 add material to inside of wall so wall is at least 3 4 see number 6 in lower image OUTSIDE WALL _ OF CABINET 2 Using a jigsaw cut a slot at least 1 2 by 2 1 8 in any support that obstructs the bracket s fit 3 Using bracket as a template mark holes and drill 1 8 pilot holes 1 2 deep at two places 4 Make sure bracket fits tightly on wall surface and there is 1 16 gap from top of bracket to top of wall If not remove material in notch or radius 5 Attach bracket to wall using 2 3 4 wood screws one in bottom hole and one in middle hole Option 3 Reference the numbers below with the diagram 1 Install 2x4 cross braces between wall studs to support bracket The bracket can be mounted on stud or any location on cross braces Use bracket as template to locate cross braces 2 If single level countertop notch top of 2x4 cap Y by 2 1 8
5. al L SNYDER INNOVATIONS INSTALLATION MANUAL Low Profile Adjustable Bracket Key Features Virtually invisible Mounts to inside of wall no interference with knees or chairs Easy to install Patented adjustment feature simplifies installation no shims needed Several mounting options Can be mounted directly to cabinet or new wall Bracket can replace corbels for single level countertop or used with corbels for two level countertop or bar height countertop Si SNYDER INNOVATIONS Low Profile Adjustable Bracket Installation Kit and Requirements Bracket Installation Requirements e Wall thickness between 3 4 4 add material if lt 3 4 Length L e Must be placed directly under any seams in countertop Used for overhangs between 8 and 18 A Bracket Kit Comes Tools Needed A A Low profile adjustable bracket e Phillips screw driver 2 Allen head set screws e 1 8 drill caulk 9 C 2 Phillips head wood screws e Router i D Allen wrench Wood chisel pa Bracket Mounting Options Option 1 Mount to Cabinet Option 2 Single Level Wall Mount Option 3 Two Level Wall Mount Wall Thickness usually 3 4 to 2 Wall thickness usually 4 Wall usually 4 requires corbels at ends Corbel Select Bracket Length L Based Upon Wall Thickness and Overhang 3 Steps to Determine Bracket Length Needed 1 Select wall thickness see Table 1 columns 3 4 in to 4
6. egligence The following products are not covered under this warranty 1 LPABs that have been altered modified neglected or poorly maintained 2 LPABs that are purchased in used condition not in original packaging or from an unauthorized dealer or distributor 3 LPABs that have been damaged during transit or shipping The following damages are not covered under this warranty 1 Damage to persons or property due to improperly installed or repaired LPABs as recommended by SI 2 Damage from causes other than defects in materials and workmanship such as a purchaser s or installer s lack of skill competence or experience 9 6 obligation under this warranty is limited to one the following at the sole option of SI 1 Replacement of the defective LPAB 2 Supply of equivalent goods 3 The payment of the cost of replacing the LPAB or 4 The payment of the cost of having the LPAB repaired 9 6 sole obligation and your exclusive remedy under this warranty shall be limited to the cost of such repair or replacement SI s aggregate liability if any in damages or otherwise shall not exceed the purchase price paid to SI by the purchaser for the LPAB product which gave rise to the warranty claim This warranty does not cover the repair or replacement costs of any property other than the defective LPAB To the extent permitted by law this warranty and remedies set forth above are exclusive and in lieu of all other warranties remedies and conditions
7. in 2 Find desired overhang in Table 1 8 in to 18 in 3 Row color in Table 1 corresponds to bracket Length L needed Bracket Comes in 5 Lengths L Bracket Length Overhang Bracket Wall Thickness Wall Thickness 3 4 in 2 in 3 in 4 in 8 Bracket 10 Length 12 L 14 16 Table 1 Overhang Dimension Range Determine Number of Brackets Required amp Spacing 3 Steps to Determine Brackets and Spacing 1 Select countertop design one level or two level 2 Use Table below to find brackets needed W One Level Two Level 2 o C EE E EE E 49 to 68 4 ewe 5 3 91108 6 3 Calculate spacing S using equation below W 6 Brackets Corbels 1 Legend C Countertop being supported Bracket distance to end corner Bracket Corbel W Cabinet Width Number Brackets S Bracket Spacing One Level Counter Layout Wall Thickness Must be at least 3 4 Overhang Overhang 3 in End Corner Two Level Counter Layout Requires corbels at ends Overhang 3 in Option 1 Mounting Bracket to Back of Cabinet Reference the numbers below with the diagram 1 Attach 3 4 plywood if necessary to inside of cabinet to meet 3 4 min wall thickness requirement Attach using 4 wood screws not includea 2 Notch top wall 1 4 by 2 1 8 Cut 1 4 radius on inside wall OUTSIDE WALL OF CABINET 3 Using br
8. that may relate to the product or this warranty lf any provision of this warranty or any portion thereof is held to be invalid and unenforceable then the remainder of this warranty shall nevertheless remain in full force and effect Any otherwise void invalid or unenforceable section term or provision of this warranty shall be so construed or reformed as to alter amend or change any such term provision or condition to the extent necessary to render it valid lawful and enforceable while also giving maximum effect to the parties originally intended purpose or result short of creating any void invalid or unenforceable provision term or condition This warranty gives you specific legal rights and you may also have other legal rights which vary from state to state Some states do not allow limitations on how long an implied warranty lasts so the above limitations may not apply to you Some states do not allow the exclusion or limitation of incidental or consequential damages so the above limitations or exclusions may not apply to you Si SNYDER INNOVATIONS SNYDER INNOVATIONS www snyderinnovations com
Download Pdf Manuals
Related Search