Edsal UR-245WGB Instructions / Assembly
Contents
1. MODEL NUMBER s edsal Steel Storage Rack UR 185WGB UR 245WGB UR 185 WGB 5 Shelf Part Number 72 x 18 d Part Si 10 RUBE3502 35 7 16 10 RUBE 1702 17 716 RUPT36025 Rmpcosog 4 These units should be placed on a level surface Failure to do so can result in poor product performance or create a possible safety hazard This unit should be securely anchored to a wall or floor with suitable fasteners which are not included Do not Use this unit for anything other than the manufactures intended purpose DO NOT STAND ON ANY PART OF THE UNIT OR USE IT AS A LADDER Evenly distribute the weight on each level and always keep the heavier loads on the bottom Use care when working with metal parts General Instructions Assembly is done with the rivets of the beams and braces fitting into the slots of the post A rubber mallet may be used on the beams and braces to seat the rivets properly A hammer can also be used providing one uses a cloth or a block of wood be tween the hammer head and the parts to prevent damage Tap gently and be sure the rivets are straight and fully engaged Should you have any comments damage missing parts or problems with assembly ofthis unit please feel free to contact our Work Force manufacturing facility at 773 475 3137 and request customer service We can aiso be reached on the internet atthe following email address customerservice edsal com Co2. cation Again place the rivets of the beams and braces into the post slots with the shelf ledge facing up and tap lightly to seat the rivets s are fully ted int Add a wood shelf to the previously built level then con tinue by adding the fourth and fifth level to the unit using two 2 beams and two 2 braces per level Tap lightly to properly seat the rivets and add the final wood shelves to the unit see figure E
3. nsumer Prachicts Division Edsal Manufacturing Company 4400 South Packers Avenue To obtain replacement parts please provide the folowing information Chicago IL 60809 www edsal com Model Part amp Description _ Location Purchased _ Date Purchased Assembly Instructions for U Assemble two 2 post with one 1 brace Skipping one slot from the bottom of the post see figure A place the rivets into post with the slot pointing down and with the shelf ledge of the brace facing up see figure B Tap lightly to seat riv ets Repeat with two 2 post and one 1 brace Assemble the two 2 post units with two 2 beams see figure C Skip one hole from the bottom of post tap lightly to seat rivets IMPORTANT NOTE Make sure all ri Note Post are directional The siot must point down Figure D Add a wood shelf to the previously built level then assem ble the top post to the bottom post by using four 4 of the post couplers Place the couplers into the top of the bot tom post and the bottom of the top post and tap down to properly seat see figure D Continue by adding the third level using two 2 beams and two 2 braces just above the post couplers Again tap lightly to seat the rivets 85 WGB amp UR 245 WGB Start by adding a wood shelf to the level previously built then continue working by adding the second level using two 2 beams and two 2 braces in the post slots of your desired lo
Download Pdf Manuals
Related Search