Makinex JHT-U Use and Care Manual
Contents
1. A D Forward motion Revision Level 4 Revision Date 08 19 14 JACK HAMMER TROLLEY MAINTENANCE GUIDE i Supplier Website www makinexusa com PURPOSE e Follow the directions below to ensure that the Jack Hammer Trolley is in working order and properly maintained SAFETY e Always wear approved eye and ear protection when working with air tools e NEVER operate the machine if parts are faulty Tool Inspection Process Step amon O Tool Cleaning amp Maintenance Process lf needed adjust cart angle release cable by tightening the retaining screw then the adjustment screw with a Phillips head screw driver Use compressed air to blow off excess dirt dust 3 Place a couple drops of light oil at the top of the release cable so that it runs through the cable housing Do not use grease or heavy oil as this will clog the housing Using a grease gun apply grease via the grease nipple shown in A until excess starts to leak Wipe off tool with clean dry rag Revision 1 10 04 152. Operation and Safety Guide Jack Hammer Trolley Vendor Website www makinexusa com SAFETY TOPICS Read and understand the operator s Manual or Operations and Safety Guide before using this machine Failure to follow operating instructions could result in death or serious injury SAFETY CHECKLIST Always wear safety goggles ear protection and hard toe shoes when operating this equipment Always ensure machine is switched OFF before plugging in Always ensure the chisel or scraper shaft is correctly inserted and locked in position before use Always inspect the Jack Hammer Trolley for any signs of damage before use Do not use if it appears damaged Do not wear loose clothing while operating this machine Loose material may become caught in the mechanism Do not touch the Jack Hammer chisel or shaft while in operation Do not operate if you have a known medical condition which may affect your ability to safety operate the Jack Hammer Trolley Always maintain a correct stance while operating the Jack Hammer Trolley to avoid injury Always use on a flat level surface Always use a dedicated power supply with an extension cord that does not exceed 30 feet in length Always switch OFF the machine before unplugging Created by Michael Chen Company Makinex JHT Makinex Support Phone US 407 446 1966 407 826 0000 Tool Application The Jack Hammer Trolley is used in conjuncti
3. on with a 30 35lb Jack Hammer or Breaker for the removal of most types of flooring inclusive of wood ceramic and stone tile vinyl linoleum and carpet Tool Setup Select appropriate Makinex scraper attachment for use The wide chisel is primarily for use to remove tiles on a sanded cement bed The Tile Smasher attachment is recommended for use on a concrete surface for the removal of wood vinyl carpet ceramic amp stone tiles 2 Carefully place the Jack Hammer Trolley onto its back A and mount the chosen scraper attachment by following the manufacturer s instructions for the hammer breaker 3 After returning the Jack Hammer Trolley to its upright position lift handles to take weight off lock mechanism then pull the brake lever to disengage the lock mechanism B 4 Lift or lower the height of the handles to achieve the desired angle ett sesk Hammer Tey Ohne ne SENG Release brake lever to re engage the lock mechanism Tool Operation mechanism of the trolley and cannot rotate 2 Never allow hammer breaker or chisel scraper to overheat Refer to Jack Hammer manufacturer for continuous usage _ 3 4 guidelines Take regular breaks to avoid user fatigue and wear on hammer breaker 3 Turn on the power switch of the hammer breaker 4 Place both hands on handle and place a foot on the footrest 5 Maintain a straight back and proceed in a slow steady linear motion while operating the Jack Hammer Trolley D B
Download Pdf Manuals
Related Search