Mayne 5820CL Instructions / Assembly
Contents
1. Set the address sign in the desired location and mark the position of the wood posts Dig a 20 deep hole for each post Place the sign into the holes and adjust the depth if needed Use a level to check the signs orientation Once you are satisfied fill in the holes For added stability in high wind or traffic areas we recommend using pre mix concrete not included Questions If you have any questions concerning the assembly or installation of this product and require assistance please call our Customer Service Department at 1 866 363 8834 Weekdays from 8 00am to 4 00pm Eastern standard time If you have any comments or suggestions about our Mail Posts of Distinction product or service please let us know Call 1 866 363 8834 or Email info mayneposts com www mayneposts com2. Nantucket amp Winchester Assembly Instruct General Information e Read instructions carefully before beginning assembly e Identify each component from material list e Do not use excessive force when assembling components e To clean this product for best results use a soap solution and high pressure water e In the event of missing or defective parts please call our customer service department at 1 866 363 8834 Materials List Part Description Quantity 1 Decorative Address Sign 1 Nantucket or Winchester Hardware Pack Includes 2 8 x 3 steel screw 3 Nylon washer Plastic snap cap 4 each white tan amp grey Two 4x4 wood posts not included 48 length recommended Tools Required Cordless drill Robertson drill bit Tape measure Level IMPORTANT NOTE e 4x4 wood posts pre mix concrete and address plaques Mail Posts of Distinction are NOT included with Mayne address signs www mayneposts com Assembly Instructions Insert a 4x4 wood post part 5 not included into one of the holes in the sign Leave about 20 inches sticking out of the bottom Hold the post steady and secure it to the base with a 3 inch screw part 2 through each side as illustrated Do not over tighten the screws it could cause the plastic to dimple or crack Repeat this step for the second wood post Please note that nylon washers part 3 and plastic snap caps part 4 are provided to cover the screw heads
Download Pdf Manuals
Related Search