Salsbury Industries 3396SAN Installation Guide
Contents
1. Regency Decorative CBU Accessories Decorative Top 3350 Decorative Pedestal Cover Short 3386 Decorative Pedestal Cover Tall 3396 Installation Instructions U S P S APPROVED Thank you for your purchase of Regency Decorative CBU Accessories manufactured by Salsbury Industries We are confident that you will find them to be an attractive addition to the Cluster Box Unit CBU Installation of the Regency decorative tops 3350 are intended to be on a USPS approved F type CBU Installation of the Regency decorative pedestal covers 3386 and 3396 are intended to be on the CBU pedestals Installation of Decorative Top Installation of Decorative Pedestal Covers 1 Fasten the ball finial to the decorative top from the underside of Note The following instructions apply to both the short decorative the decorative top using two 2 M4x8 allen bolts pedestal cover 3386 and the tall decorative pedestal cover 3396 2 Before placing the decorative top on to the CBU top apply 1 Slide one half of the black plastic insect guard into the top of either thread lock to the four 4 M6x8 allen cone point set screws and one of the decorative pedestal cover halves Make sure the locator insert into the two 2 threaded holes on each side of the tabs on the pedestal cover align with the slots on the insect guard decorative top Repeat on the other half of the pedestal cover 3 Only turn the set screws until they are flush with the i2. nside 2 Place one of the pedestal covers with guard installed into position surface of the decorative top so that the decorative top can be underneath the rear of the CBU and around the rear of the CBU placed on the CBU top pedestal 4 Place the decorative top on to the CBU top Be sure the logo on 3 Place the other pedestal cover with guard installed underneath the the decorative top is positioned at the rear of the CBU Tighten front of the CBU and around the front of the CBU pedestal the four 4 allen set screws evenly to secure the decorative top 4 Use four 4 M4x16 allen bolts two 2 at the top and two 2 at the to the CBU bottom to bolt the two 2 halves of the pedestal covers together 5 Thread four 4 M6x20 allen set screws one at the top and one at Decorative Top the bottom on both the front and rear halves into the threaded holes to prevent the pedestal covers from moving Decorative Pedestal Covers TOP 3350 SHORT 3386 TALL 3396 SALSBURY INDUSTRIES 1010 East 62 Street Los Angeles CA 90001 1598 Ph 1 800 624 5269 Int l Ph 323 846 6700 Fx 1 800 624 5299 Int l Fx 323 846 6800 Installation instructions are provided as general guidelines It is advised that a professional installer be consulted Salsbury Industries assumes no product assembly or installation liability Copyright 2010 Salsbury Industries All rights reserved Rev 02 11 3 2010
Download Pdf Manuals
Related Search