Kawasaki 840056 Use and Care Manual
Contents
1. 14 SECTION FIVE 2 YEAR LIMITED WARRANTY lssssssse n eee 15 18 CONGRATULATIONS Thanks for choosing this product At Alltrade our aim is to provide you with quality products at an affordable price and we want you to be totally satisfied with your product and our Customer Service If any help and advice is needed please contact us at 1 800 590 3723 Properly cared for this tool will give you many years of satisfaction INTENDED USE This tool is intended for consumer use only Your charger and or adapter has been designed for charging batteries of the type approved and supplied with this tool RECOGNIZE SAFETY SYMBOLS WORDS AND LABELS 4 WARNING READ AND UNDERSTAND ALL INSTRUCTIONS Failure to follow all instructions listed below may result in electric shock fire and or serious personal injury SAVE THESE INSTRUCTIONS FOR FUTURE REFERENCE The safety instructions provided in this manual are not intended to cover all possible conditions and practices that may occur when operating maintaining and cleaning power tools Always use common sense and pay particular attention to all the DANGER WARNING CAUTION and NOTE statements of this manual A This is the safety alert symbol It is used to alert you to potential personal injury hazards Obey all safety messages that follow this symbol to avoid possible injury or death DANGER indicates an imminently hazardous situation which if not avoided will result in d2. IN NO EVENT SHALL ALLTRADE AND OR ITS REPRESENTATIVE S BE LIABLE FOR INDIRECT INCIDENTAL SPECIAL AND OR CONSEQUENTIAL DAMAGES OF ANY KIND ARISING OUT OF OR RELATED TO DIRECTLY OR INDIRECTLY ANY BREACH OF ANY PROVISION OF ANY AGREEMENT BETWEEN ALLTRADE AND OR ITS REPRESENTATIVE S AND PURCHASER ANY WARRANTY HEREUNDER AND OR THE EXISTENCE DESIGN MANUFACTURE PURCHASE USE AND OR OPERATION OF ANY ITEM S SOLD HEREUNDER EVEN IF ALLTRADE AND OR ITS 17 REPRESENTATIVE S HAS BEEN ADVISED OF THE POSSIBILITY OF ANY SUCH DAMAGES IN NO EVENT WHETHER AS A RESULT OF A BREACH OF CONTRACT WARRANTY TORT INCLUDING NEGLIGENCE OR OTHERWISE SHALL ALLTRADE S AND OR ITS REPRESENTATIVE S LIABILITY EXCEED THE PRICE OF THE PRODUCT ANY AND ALL LIABILITY CONNECTED WITH THE USE OF THIS PRODUCT SHALL TERMINATE UPON THE EXPIRATION OF THE WARRANTY PERIODS SPECIFIED ABOVE Limitations on Warranty Disclaimers Some states do not allow limitations on how long an implied warranty lasts and some states do not allow the exclusion or limitation of the incidental or consequential damages so part or all of the above limitations or exclusions may not apply to you This warranty gives you specific legal rights and you may also have other rights which vary from state to state If your product is not covered by this warranty please call our Customer Service Department toll free at 1 800 590 3723 for general repair information and charges 18
3. such nonconforming item and or part is promptly returned to Alltrade s facility postage pre paid and insured address ALLTRADE Warranty Claims amp Repair 1431 Via Plata Long Beach CA 90810 Attn Customer Service 1 800 590 3723 within the applicable warranty period with a written request by purchaser that Alltrade repair and or replace the nonconforming item and or part We recommend that you keep the original product packaging in the event you need to ship the unit We suggest the package be insured against loss or in transit damage When sending your product include your name address phone number dated proof of purchase or copy and a statement about the nature of problem Warranty coverage is conditioned upon purchaser furnishing Alltrade with adequate written proof that they are the original purchaser and of the original purchase date Parts returned freight prepaid and insured to Alltrade s facility see above address will be inspected and at Alltrade s option repaired and or replaced free of charge if found to be defective and subject to warranty Alltrade retains the sole discretion to determine whether any item or part is nonconforming and if so whether the item and or part will be repaired and or replaced If the unit is repaired new or 15 reconditioned replacement parts may be used If Alltrade chooses to replace the product it may replace it with a new or reconditioned one of the same or comparable design The re
4. work with approved safety equipment such as dust masks that are specially designed to filter out microscopic particles WARNING Handling the power cord on corded products may expose you to lead a chemical known to the State of California to cause cancer and birth defects or other reproductive harm Wash hands after handling BATTERY TOOL USE AND CARE A WARNING Ensure the switch is in the off position before inserting battery pack Inserting the battery pack into power tools that have the switch on invites acci dents Recharge only with the charger specified by the manufacturer A charger that is suitable for one type of battery pack may create a risk of fire when used with another battery pack Use power tools only with specifically designated battery packs Use of any other battery packs may create a risk of injury and fire When battery pack is not in use keep it away from other metal objects like paper clips coins keys nails screws or other small metal objects that can make a connection from one terminal to another Shorting the battery termi nals together may cause burns or a fire Under abusive conditions liquid may be ejected from the battery avoid con tact If contact accidentally occurs flush with water If liquid contacts eyes additionally seek medical help Liquid ejected from the battery may cause irrita tion or burns A CAUTION Have your power tool serviced by a qualified repair person using only ident
5. AMPERE 1 OFT 25FT 50FT 100FT 3 6 18 18 18 18 6 8 18 18 18 16 8 10 18 18 18 14 10 12 16 16 14 14 12 16 14 12 12 16 20 12 12 12 SPECIFICATIONS SPECIFICATIONS Voltage 19 2V Light Bulb Type Krypton 19 2V 10 Watt Charger Input 120V N 60Hz Battery Type Ni Cad PROTECTING THE ENVIRONMENT BATTERIES Alltrade batteries can be recharged many times At the end of their useful life recy cle batteries with due care for our environment Ni Cad and Ni MH batteries are recyclable Take them to your local recycling center or call 1 800 822 8837 Collected batteries will be recycled or disposed of properly OTHER CONSUMER DO IT YOURSELF DIY TOOLS Alltrade offers a full range of Kawasaki tools that make DIY jobs easy If you would like further information on the following products please contact Alltrade Customer Service Department at 1 800 590 3723 Cordless Drills Screwdrivers Impact Wrenches Sanders Jigsaws Circular Saws Angle Grinders Reciprocating Saws Routers Rotary Tools Corded and Cordless Multi Purpose Tools Wide Range of Accessories and more 14 2 YEAR LIMITED HOME USE WARRANTY Express and Exclusive Limited Home Use Warranty to Original Retail Buyer Alltrade Tools LLC hereinafter Alltrade expressly warrants to the original retail purchaser of the accompanying KAWASAKI portable power tool and no one else all parts of the product except those parts referred to below which are specifically
6. AND OR ITS REPRESENTATIVE S OR THE BUYER ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED BY ALLTRADE AND OR ITS REPRESENTATIVES PURCHASER KNOWINGLY AND WILLINGLY WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS CLAIMS AND OR CAUSES OF ACTION ARISING THEREFROM OR BASED THEREON PURCHASER S SOLE AND EXCLUSIVE REMEDY IS AS STATED ABOVE EXCLUSION AND DISCLAIMER OF ALL IMPLIED WARRANTIES INCLUDING THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE NO WARRANTY ORAL OR WRITTEN OTHER THAN THE ABOVE WARRANTY IS MADE WITH REGARD TO THIS PRODUCT ALL EXPRESS AND OR IMPLIED WARRANTIES GUARANTIES AND OR REPRESENTATIONS BY ALLTRADE AND OR ITS REPRESENTATIVE S REGARDING THE DESIGN MANUFACTURE PURCHASE USE AND OR OPERATION OF THE PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER REGARDLESS OF WHETHER ANY SUCH WARRANTY GUARANTY AND OR REPRESENTATION WRITTEN OR ORAL ARISES BY OPERATION OF LAW AND OR EQUITY AND OR BY ANY ACT OR OMISSION OF ALLTRADE AND OR ITS REPRESENTATIVE S OR THE PURCHASER INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTY OF MERCHANTABILITY AND THE WARRANTY OF FITNESS FOR A PARTICULAR PURPOSE ARE HEREBY EXPRESSLY EXCLUDED AND DISCLAIMED BY ALLTRADE AND OR ITS REPRESENTATIVES PURCHASER KNOWINGLY AND WILLINGLY WAIVES ANY AND ALL SUCH WARRANTIES AND RIGHTS CLAIMS AND OR CAUSES OF ACTION ARISING THEREFROM OR BASED THEREON PURCHASER S SOLE AND EXCLUSIVE REMEDY IS AS STATED ABOVE Limitation Of Liability
7. FOR CUSTOMER SERVICE POUR LE SERVICE APRES VENTE OU DU CONSOMMATEUR PARA EL SERVICIO PARA EL CONSUMIDOR 1 800 590 3723 Printed in China TERT EY El US il Conforms to Std UL298 LEW ECT LC Kawasaki Motors Corp U S A yg OFFICIAL LICENSED PRODUCT 87 1904 60957 KAWASAKI IS A TRADEMARK LICENSED BY KAWASAKI MOTORS CORP U S A WHICH DOES NOT MANUFACTURE OR DISTRIBUTE THIS PRODUCT CONSUMER INQUIRES SHOULD BE DIRECTED TO COPYRIGHT 2007 ALLTRADE TOOLS LLC 1431 VIA PLATA LONG BEACH CA 90810 1462 USA 690081_19 2V Black Cordless Worklight_Rev 7 17 07 Kawasaki 19 2V BATTERY OPERATED WORKLIGHT INSTRUCTION MANUAL BATTERIES AND CHARGERS SOLD SEPARATELY THIS MANUAL CONTAINS IMPORTANT INFORMATION REGARDING SAFETY OPERATION MAINTENANCE AND STORAGE OF THIS PRODUCT BEFORE USE READ CAREFULLY AND UNDERSTAND ALL CAUTIONS WARNINGS INSTRUCTIONS AND PRODUCT LABELS FAILURE TO DO SO COULD RESULT IN SERIOUS PERSONAL INJURY AND OR PROPERTY DAMAGE IF YOU SHOULD HAVE ANY QUESTIONS OR EXPERIENCE A PROBLEM WITH YOUR ALLTRADE PRODUCT DO NOT RETURN THIS PRODUCT TO THE STORE PLEASE CALL OUR CUSTOMER SERVICE DEPARTMENT AT 1 800 590 3723 BEFORE YOU CALL HAVE THE FOLLOWING INFORMATION AVAILABLE MODEL No DATE PURCHASED AND STORE LOCATION AN ALLTRADE REPRESENTATIVE CAN RESOLVE YOUR PROBLEM OVER THE PHONE IF YOU WOULD LIKE TO MAKE A SUGGESTION OR COMMENT GIVE US A CALL OR EMAIL US AT INFO A
8. LLTRADETOOLS COM YOUR FEEDBACK IS VITAL TO US TABLE OF CONTENTS CONGRATULATIONS 000 0 2 INTENDED USE ooie ordei re E or FEX et ag ds 2 SECTION ONE RECOGNIZE SAFETY SYMBOLS WORDS AND LABELS 2 3 IMPORTANT SAFEGUARDS vic 22 52 eae rernm en 3 BATTERY TOOL USE AND GARE 1 5 iases sete ere eer beds 4 SERVICE ous 3 Sides Cid owed Ou sey TU EROR DES ened 4 SECTION TWO SAFETY RULES FOR WORKUIGHT 2 atra lorctetn 4 5 SYMBOLS o scrirnebdteemo TR ER TE Eee Ure b RPRE RP ERE 5 SECTION THREE FUNCTIONAL DESCRIPTION 5s 13 224 7 ied bre ege ne 6 BADIERY 420 ees ob eieae a a E ea dane e P do ew redis 6 10 REMOVING ATTACHING BATTERY PACK 00 8 CHARGER 690072 ADAPTER 7690074 8 CHARGING BATTERY PACK USING CHARGER 690072 ADAPTER 690074 9 CHARGER 690507 witch bed chow ice Saco pe arat e 9 10 CHARGING BATTERY PACK USING CHARGER 7690507 10 OPERATING THE WORKLIGHL 23524 nike ren Re kc itn 11 12 OPERATING THE ON OFF SWITCH 00 11 ADJUSTING THE WORKLIGHT BEAM 11 REPLACING THE LIGHT BULB ac icc die dcae ide dieites pag Deas 11 12 SECTION FOUR MAINTENANCE AND CLEANING 2 eee RR 12 AGGEBSURIED saei gau faex Soa deed A rni Pepe omar Shade 13 SPEGIFICATIONS 1 2 57 04 18 wasd hd Pak Edere hee Ge dna 13 PROTECTING THE ENVIRONMENT rrr ph rn meet 13 OTHER CONSUMER DO IT YOURSELF DIY TOOLS
9. ar Always clean the battery pack using only a dry cloth Do not use liquids Always unplug the charger before cleaning it Regularly clean the ventilation slots in your tool and charger using only a soft brush or dry cloth Never open the Worklight case battery pack or charger Do not attempt to repair the Worklight battery pack or charger yourself Opening any of these parts will void your warranty A CAUTION Use only authorized replacement parts for your tool Equipment service must be performed only by qualified repair personnel using authorized replacement parts Service or maintenance by unqualified personnel could result in considerable risk of personal injury Use of unauthorized parts or failure to follow maintenance instructions may create a risk of electric shock or injury 12 Use only accessories that are recommended by the manufacturer for your model Accessories that may be suitable for one tool may become hazardous when used on another tool Always attach grounded 3 prong extension cords to grounded 3 hole outlets If you must use an extension cord be sure that the gauge is large enough to carry the amount of current necessary for your power tool If not your tool may experience a loss of power excessive voltage drop or overheating The smaller the gauge number the heavier the cord see table below RECOMMENDED SIZES OF EXTENSION CORDS 120 VOLT AC 60 HZ TOOLS TOOL CURRENT RATING CONDUCTOR SIZE IN A W G
10. eath or serious injury A DANGER WARNING indicates a potentially hazardous situation which if not avoided could result in death or serious injury 2 A CAUTION CAUTION indicates a potentially hazardous situation which if not avoided may result in minor or moderate injury CAUTION used without the safety alert symbol indicates a potentially hazardous situation which if not avoided may result in property damage CAUTION NOTE provides additional information that is useful for proper use and maintenance of this tool If a NOTE is indicated make sure it is fully understood NOTE IMPORTANT SAFEGUARDS 4 DANGER People with electronic devices such as pacemakers should consult their physician s before using this product Operation of electrical equipment in close proximity to a heart pacemaker could cause interference or failure of the pacemaker WARNING Some dust created by power sanding sawing grinding drilling and other construction activities contains chemicals known to the State of California to cause cancer birth defects or other reproductive harm Some examples of these chemicals are Lead from lead based paints e Crystalline silica from bricks and cement and other masonry products and arsenic and chromium from chemically treated lumber Your risk from these exposures varies depending on how often you do this type of work To reduce your exposure to these chemicals work in a well ventilated area and
11. ect Current Type of Current Alternating or Direct Current Type of Current Earthing Terminal Grounding Terminal n Class Construction Denotes Double Insulation min Minutes Time S Seconds Time b Diameter Size of Drill Bits Grinding Wheels etc n No load speed No load Rotational Speed min Revolutions per Minute Revolutions Surface Speed Strokes etc per Minute 1 238 Ring Selector Settings Speed Torque or Position Settings FUNCTIONAL DESCRIPTION 2 CONTROLS AND COMPONENTS 1 ON OFF Switch 2 Reflector Rim ACCESSORIES 3 Replacement Light bulb inside unit BATTERY Before using battery pack please read carefully all instructions and cautionary markings on battery pack battery charger and product using battery Do not incinerate the battery pack even if it is severely dam aged or is completely worn out The battery pack can explode Do not carry battery packs in aprons pockets or tool boxes product kit boxes drawers etc with loose metal objects Battery pack terminals could be short circuited causing damage to the battery pack severe burns or fire The battery pack is Nickel Cadmium Ni Cad and is considered to be a toxic material by the Environmental Protection Agency Before disposing of dam aged or worn out Ni Cad battery packs check with your State Environmental Protection Agency to find out about special restrictions on the disposal of these battery packs take them to yo
12. excluded from such warranty see Exclusions to be free from defects in materials and workmanship for a period of two years from original date of purchase SPECIAL WARRANTY NOTE TO CONTRACTORS AND COMMERCIAL USERS This Kawasaki portable power tool is offered as a home use tool and carries a HOME USE WARRANTY This tool is made for home use in the execution of projects and repairs in and around the home Use of the tool for COMMERCIAL PURPOSES OR ON A JOBSITE is not covered under this warranty The date of purchase shall be the date of shipment to the original purchaser or the date the original purchaser took possession custody or control of the product whichever occurred first This warranty shall be null and void if the product or any component thereof is modified altered or used for any commercial purpose or on a jobsite This warranty does not apply to any other product and or component thereof manufactured or distributed by Alltrade and does not apply to products and or components thereof designed manufactured and or assembled by others for which Alltrade makes no warranties whatsoever THERE ARE NO WARRANTIES WHICH EXTEND BEYOND THE DESCRIPTION ON THE FACE HEREOF Warranty Performance By purchasing the product purchaser expressly acknowledges and agrees that their sole and exclusive remedy under this warranty shall be strictly limited to the repair or replacement of any covered nonconforming items or parts thereof provided that any
13. ical replacement parts This will ensure that the safety of the power tool is maintained SAFETY RULES FOR WORKLIGHT A CAUTION Use battery operated tool only with specifically designated battery pack Use of any other batteries may create risk of fire Keep the handle of the Worklight dry clean and free from oil and grease Do not run the Worklight while carrying it at your side The worklight heats up immediately when in use and could result in burns Do not use the Worklight if it has been damaged left outdoors in the rain snow wet or damp environments or immersed in liquid Maintain labels and nameplates on the Worklight These carry important information If unreadable or missing contact Alltrade for a replacement A CAUTION Battery pack must be recharged only with the specified charger for the bat tery A charger that may be suitable for one type of battery may create a risk of fire when used with another battery Do not use in a damp or wet environment Store out of reach of children and other untrained persons SYMBOLS IMPORTANT Some of the following symbols may be used on your tool Please study them and learn their meaning Proper interpretation of these symbols will allow you to operate the tool better and safer SYMBOL NAME EXPLANATION V Volts Voltage Potential A Amperes Current Hz Hertz Frequency Cycles per Second W Watt Power Kg Kilograms Weight N Alternating Current Type of Current Dir
14. identical markings on the top of the charger base Insert the battery pack into base Pack will not insert properly if reversed BATTERY PACK BATTERY Make sure the trigger on the CHARGER Cordless Worklight is in the OFF position and remove the battery pack from the Cordless Worklight n2 co If when first inserting the battery pack the red ON button does not light up press the SET button on the charger When the battery is charging the red light is ON 4 After approximately one hour of charging the red indicator light should go OFF and the green light should come ON The green light indicates that the battery is fully charged C1 When fully charged reattach battery pack onto Cordless Worklight making cer tain latches fasten securely Cordless Worklight will not operate properly if the battery pack is not seated properly 10 OPERATING THE WORKLIGHT 4 WARNING Parts of this Worklight heat up almost immediately when in use To avoid burns use caution when handling light bulb and metal reflector Never change a hot light bulb Bulb must be cool to the touch before attempting to remove or replace it OPERATING THE ON OFF SWITCH Press the ON OFF switch to turn the worklight ON and OFF ADJUSTING THE WORKLIGHT BEAM Hold the handle of the Worklight securely in one hand With the other hand swivel the head of the Worklight counter clockwise u
15. ntil it is at the angle you desire Swivel the head of the Worklight clockwise to return it to its original position REPLACING THE LIGHT BULB This Worklight uses a Krypton 19 2V 0 6 A light bulb Use of any other kind of light bulb may cause damage or injury Parts of this worklight heat up almost immediately when in use To avoid burns use caution when handling light bulb and metal reflector Never change a hot light bulb Bulb must be cool to the touch before attempting to remove or replace it NOTE For your convenience a spare light bulb is included inside the unit Unscrew the rim and carefully remove it from the light assembly 11 1 Remove the battery pack from the Worklight 2 Hold the top of the Worklight with one hand while twisting the rim in a counter clockwise direction with the other Continue turning until the rim comes loose REPLACEMENT 3 Remove the bulb by turning it slightly and pulling it out of the bulb fitting Be careful not to damage the delicate parts inside the case 4 Insert the new bulb then carefully put the rim back in place and turn it clockwise to tighten it MAINTENANCE AND CLEANING 4 WARNING Always remove the battery pack before attempting cleaning or maintenance Use only mild soap and a damp cloth to clean the tool Never let any liquid get inside the casing Never immerse any part of the tool in a liquid Always keep the ventilation openings Cle
16. paired or replaced unit will be warranted under the terms of the remainder of the warranty period Typically a defective product that is returned within the first 30 days after the purchase date will be replaced for items returned after the first 30 days and within the warranty period covered defective parts not subject to normal wear and tear or other exclusions will be repaired or replaced at Alltrade s option During the warranty period Alltrade will be responsi ble for the return shipping charges Alltrade s repair and or replacement of any non conforming item and or part thereof shall constitute fulfillment of all obligations to the purchaser Alltrade shall not be responsible or liable for any expense including freight charges or repairs made outside Alltrade s facility unless expressly agreed to by Alltrade in writing Under no circumstances shall Alltrade bear any responsibility for loss of the unit loss of time or rental inconvenience commercial loss or consequential damages Exclusions This warranty does not cover parts damaged due to normal wear abnormal conditions misapplication misuse abuse accidents operation at other than recommended pressures or temperatures improper storage or freight damage Parts damaged or worn by operation in dusty environments are not warranted Failure to follow recommended operating and maintenance procedures also voids warranty This limited warranty does not apply to accessory items
17. run slowly When battery pack is not in use keep it away from other metal objects such as paper clips coins keys nails screws or other small metal objects that can make a connection from one terminal to another Shorting the battery terminals together may cause sparks burns or fire REMOVING ATTACHING BATTERY PACK REMOVE BATTERY PACK 1 Press both release buttons on either side of the Cordless Worklight to release the battery pack 2 Pull battery pack free of Cordless Worklight ATTACH BATTERY PACK 1 Align the raised portion of the battery pack with the groove in the battery compartment of the Cordless Worklight 2 Press the battery pack into place Make sure the latches are securely fastened Do not use the Cordless Worklight if the battery pack is not seated properly RELEASE BUTTON len CHARGER 690072 ADAPTER 690074 4 WARNING Before using battery charger please read carefully all instructions and cautionary markings on battery charger battery pack and product using battery NOTE The charger will not automatically turn OFF when the battery pack is fully charged The charging indicator light will remain ON until the charger is disconnected from the electrical outlet Use only the charger which accompanied your product or direct replacement as listed in this manual Do not substitute any other charger Use only Alltrade approved chargers with your product Do no
18. such as drill bits screwdriving bits circular saw blades jigsaw blades grinding wheels sanding sheets and other related items DAMAGE TO THE PRODUCT RESULTING FROM TAMPERING ACCIDENT ABUSE NEGLIGENCE FAILURE TO FOLLOW INSTRUCTIONS UNAUTHORIZED REPAIRS OR ALTERATIONS DAMAGE WHILE IN TRANSIT TO OUR SERVICE FACILITY USE OF UNAPPROVED OR IMPROPER ATTACHMENTS OR ACCESSORIES COMMERCIAL AND RENTAL APPLICATIONS OR OTHER CAUSES UNRELATED TO PROBLEMS WITH MATERIAL OR WORKMANSHIP ARE NOT COVERED BY THIS WARRANTY Alltrade will not be liable for the following labor charges loss or damage resulting from improper operation maintenance or repairs made by other persons pre delivery services such as assembly oil or lubricants and adjustment maintenance services that are normally required to maintain the product The use of other than genuine Alltrade Repair Parts will void warranty 16 Warranty Disclaimers EXCLUSION AND DISCLAIMER OF ALL OTHER EXPRESS WARRANTIES GUARANTIES AND OR REPRESENTATIONS EXCEPT FOR THE LIMITED WARRANTY PROVIDED ABOVE ALL OTHER EXPRESS WARRANTIES GUARANTIES AND OR REPRESENTATIONS BY ALLTRADE AND OR ITS REPRESENTATIVE S REGARDING THE DESIGN MANUFACTURE PURCHASE USE AND OR OPERATION OF THE PRODUCT OR ANY COMPONENT THEREOF SOLD HEREUNDER REGARDLESS OF WHETHER ANY SUCH WARRANTY GUARANTY AND OR REPRESENTATION WRITTEN OR ORAL ARISES BY OPERATION OF LAW AND OR EQUITY AND OR BY ANY ACT OR OMISSION OF ALLTRADE
19. t disassemble charger Do not use charger if it has been damaged left outdoors in the rain snow wet or damp environments or immersed in liquid The battery pack and charger heat during charging Place the charger on a flat non flammable surface away from flammable materials with at least four inches of clearance to allow proper air circulation around the charger and battery pack When the battery pack requires recharging a 3 5 hour charge allows the tool to operate at full power A charging indicator light on the charger will illuminate to show that charging is taking place CHARGING BATTERY PACK USING CHARGER 690072 ADAPTER 690074 CHARGE BATTERY PACK BATTERY PACK Make sure the trigger on the Cordless Worklight is in EE the OFF position and 120V AC remove the battery pack Ag Bl e ADAPTER from the Cordless Worklight 2 Insert the battery pack into the charger Be sure that the battery pack is fully seated in the charger Do not force 3 Plug the charger into the Eus nearest 120 volt electrical outlet The indicator light will come ON IMPORTANT INFORMATION FOR RECHARGING HOT BATTERIES When using your Cordless Worklight continuously the batteries in your battery pack will become hot You should let a hot battery pack cool down for approximate ly 30 minutes before attempting to recharge When the battery pack becomes dis charged and is hot the red light on the charger will flash When
20. the battery pack cools down the red light will glow continuously NOTE This will occur when continuous use of your Cordless Worklight causes the battery pack to become hot It does not occur under nor mal circumstances ONE HOUR CHARGER 690507 4 WARNING Before using battery charger please read carefully all instructions and cautionary markings on battery charger battery pack and product using battery Use only the charger which accompanied your product or direct replacement as listed in this manual Do not substitute any other charger Use only Alltrade approved chargers with your product Do not disassemble charger Do not use charger if it has been damaged left outdoors in the rain snow wet or damp environments or immersed in liquid The battery pack and charger heat during charging Place the charger on a flat non flammable surface away from flammable materials with at least four inches of clearance to allow proper air circulation around the charger and battery pack When the battery pack requires recharging a 1 hour charge allows the tool to operate at full power A charging indicator light on the charger will illuminate to show that charging is taking place CHARGING BATTERY PACK USING ONE HOUR CHARGER 690507 cab ti BATTERY PACK 1 Plug the charger into the nearest 120 volt electrical outlet The step of the bat tery has positive and nega tive terminal markings on it Align the markings with the
21. ur local recycling center for proper disposal or call 1 800 822 8837 4 WARNING Use only Kawasaki 19 2V Battery Pack 691034 or 691240 with the One Hour Charger 690507 or Charger 690072 Adapter 690074 The battery is not fully charged Charger 690072 Adapter 690074 Before first use the battery pack requires 8 10 hours charge time to be fully charged Subsequent recharging needs 3 5 hours for the battery to be fully charged One Hour Charger 690507 Before first use the battery pack requires 3 5 hours charge time to be fully charged Subsequent recharging needs 1 hour for the battery to be fully charged Always switch to a fresh battery when tool performance begins to diminish Severe heat is most destructive to a battery the more heat generated the faster the battery loses power A battery that gets too hot can have a shortened life Never over discharge a battery by using the tool even after tool performance has decreased Do not attempt to discharge a tool s battery by continuing to pull on the tool trigger When tool performance begins to diminish stop the tool and recharge the battery for optimal performance Charge battery pack at ambient temperatures between 50 F 104 F Store tool and battery pack in locations where temperatures will not exceed 120 F This is important to prevent serious damage to the battery cells The battery pack should always be recharged when the Cordless Light begins to
Download Pdf Manuals
Related Search