Enviromate Products RMNDIYSLR Installation Guide
Contents
1. ENVIR MATE Enviro Light LED Solar Light Source Directions for Installation 1 Remove the black pull tab located below the three LEDs on the underside of the unit This will activate the battery pack The unit requires at least four complete day and night cycles to achieve maximum performance Fig 1 2 Loosen the existing screws holding your ad dress plaque to the wall Fig 2 Fig 2 3 Remove the locking screw from the back bracket and remove the bracket from the cover Note Bracket is not required for this method of installation Fig 3 Holding the address sign in position place the solar cover onto the top of the address frame placing the lip of the cover behind the frame itself Fig 4 Tighten the existing address plaque screws until they are secure Fig 5 Fig 4 Fig 5 Alternative mounting instructions 1 Remove the black pull tab located below the surface over the item that you want to illuminate three LEDs on the underside of the unit This Using the outer holes of the bracket as a tem will activate the battery pack The unit requires plate mark and drill two holes into the surface at least four complete day and night cycles to making sure that the bracket is level Use the achieve maximum performance Fig 1 Supplied plugs and screws to secure the bracket to the mounting surface Fig 7 2 Remove the locking screw from the back bracket Remove the bracket from the cover by 4 Mount the So2. lar cover onto the bracket by Sliding it aligning the slots in the cover over the two brack downward Fig 6 et guides and pushing down on top of the cover Secure the cover with the locking screw provided 3 Place the bracket in position on the mounting Fig 8 aa
Download Pdf Manuals
Related Search