Husky H4340 Instructions / Assembly
Contents
1. Operation 1 Operating the impact driver This Impact Driver has a two step trigger that delivers higher speed with increased trigger pressure The speed is controlled by the amount of switch trigger depression To turn the impact driver ON depress the switch trigger To turn the impact driver OFF release the switch trigger 2 Changing the rotation direction The direction of the bit rotation is reversible Control the rotation direction by moving the side mounted switch to Forward or Reverse as required for the operation 3 Installing and removing the bits NOTE It is normal for there to be some play in the installed bit Use only impact quality bits with a locking groove i WARNING Ensure the bit is secured in the coupler before using the impact driver Failure to do so could cause serious personal injury To install the bits Remove the air supply from the impact driver Pull back the ball retainer 37 and insert the bit Release the sleeve and the bit locks in place Pull on the bit to ensure it is secured in the coupler To remove the bits Remove the air supply from the impact driver With the nose of the tool pointed away from you pull back the ball retainer 37 Remove the bit Driving or removing screws Place the rotation dire2. ction switch in the correct position forward or reverse for the operation Hold the impact driver with one hand Place the bit on the screw head and slowly depress the switch trigger Start the bit slowly for more control As the screw is driven impacting will begin HUSKYTOOLS COM Please contact 1 888 43 HUSKY for further assistance
Download Pdf Manuals
Related Search