Professional Woodworker 51832 Use and Care Manual
Contents
1. 50042. Please carefully read and save these instructions before attempting to assemble maintain install or operate this product Observe all safety information to protect yourself and others Failure to observe the instructions may result in property damage andor personal injury Please keep instructions for future reference Important Operating Instruction VARIABLE SPEED ROTARY TOOL CALIFORNIA PROPOSITION 65 WARNING You can create dust when you cut sand drill or grind materials such as wood paint metal concrete cement or other masonry This dust often contains chemicals known to cause cancer birth defects or other reproductive harm Wear protective gear WARNING This product or its power cord may contain chemicals including lead known to the State of California to cause cancer and birth defects or other reproductive harm Wash hands after handling Important When using equipment a few safety precautions must be observed to avoid Injuries and damage Please read the complete operating manual with due care Keep this manual in a safe place so that the information is available at all times Ifyou give the equipment to anyother person give them these operating instructions as well We accept no liability for damage or accidents which arise due to non obsenance of these instructions and the safety information herein SPECIFICATIONS Maximum Output 135 watt Collet Chuck Capac
3. ity 1 8 diameter This tool can be used for drilling grinding sanding polishing engraving and removing rust in tight or inaccessible spaces CAUTION FOR YOUR OWN SAFETY READ INSTRUCTION MANUAL COMPLETELY AND CAREFULLY BEFORE OPERATING THIS ROTARY TOOL Any failures made in following the safety regulations and instructions may result in an electric shock fire andlor serious injury SAFETY INSTRUCTIONS Keep the work area clean and well it Do notuse power tools in damp or wet locations Do not expose power tools to rain Prevent electric shock by keeping body parts away trom grounded Surfaces such as radiators pipes refrigerators etc Store the tool when notin use Do not force the tool to do something itwas not designed todo Use the right tool Do notuse a small tool for a job which was meant for a heavy duty power tool Wear safety glasses Secure your work with a clamp or Woe Do not overreach while using this tool Keep tools clean and well maintained for better performance For warranty purchases plea keep your dated proof of purchase le or attach to the manual for safekeeping For customer service cat 1 800 348 5004 or ema feedbacknatiiools com S 88051832 05 11 Disconnect the tool when notin use and before changing accessories Remove adjusting keys and wrenches before tuming the tool on Do not carry pl
4. t chuck counter clockwis Insert the collet that matches the shaft size of the accessory thatis to be used Place the collet nut over the collet and then insert the shaft into the collet chuck Hand tighten the collet nut Do located on the rear of the tool Donotchange the speed while otuse a tool such as pliers to the tool is in use tighten the nut eedbacktinatitools com 4 800 348 5004 Limited Manufacturer Warranty North American Too NAT Industries makes every effort to ensure that this product meets high quality and durability standards NAT warrants to the original retail consumer a 1 year limited warranty from the date the product was purchased at retail and each product is free from defects in materials Warranty does not apply to defects due directly or indirectly to misuse abuse negligence or accidents repairs or alterations or a lack of maintenance NAT shall in no event be liable for death injuries to persons or property or for incidental special or consequential damages arising from the use of our products To receive service under warranty the original manufacturer part must be retumed for examination by an authorized service center Shipping and handling charges may apply Ifa defect is found NAT will either repair or replace the product at its discretion DO NOT RETURN TO STORE For Customer Service Email feedback natitools com or Call 1 800 348 5004 Teodback natitols com 4 800 348
5. ugged in tool with a finger on the switch Stayalert and watch what you are doing Do notuse the tool when tired or under the use of drugs or alcohol Check the tool for damaged parts before use Do notuse the tool if any parts are notin proper working ord Do not operate tools near flammable liquids or in gaseous or explosive areas Ifthe tool stalls switch it off Periodically check the tightness of the collet chuck especially during prolonged use of the same accessory USE Do not start or stop the tool while the accessoryis in contact with the work piece Hold the tool firmly and press the ON OFF switch The tool will run continuously until the switch is tumed OFF This tool comes equipped with a speed control function Aways adjust the speed prior touse Use a low speed setting for uses suchas polishing and cleaning and a high speed for uses such as engraving The too will become warm after prolonged use Ifthe too becomes warm tum itoff and allow itto cool To ensure the tool runs property the spindle should be oiled periodically Do not apply too much pressure to the accessory bits while the tool is being used When drilling into metal always mark the drilling point with a center punch first so that the tool bit does not slip PLACING ACCESSORIES IN THETOOL Aways make sure the tool is off first Hold the lock button at the front of the tool down and undo the colle
Download Pdf Manuals
Related Search