VIAIR 90150 Use and Care Manual
Contents
1. pressure simple pull knob away from the regulator body and adjust as needed Always lock the adjustment knob in place before using pressure adjusted air supply to keep pressure regulated at a fixed pressure AIR IN FROM TANK REGULATED AIR OUT Your Vital Air Source VIAIR CORPORATION 15 EDELMAN IRVINE CA 92618 TEL 949 585 0011 FAX 949 585 0188 TOLL FREE 800 618 1994 www viaircorp com TO ADJUST PRESSURE PRESS UPWARDS TO LOCK2. INLINE PRESSURE REGULATOR P N 90150 INSTALLATION INSTRUCTIONS This adjustable inline air pressure regulator may be used to regulate the pressure in your air tank down to any pressure between 0 200 PSI This is especially useful for installations that will supply air to a locking differential or may be used to operate air tools that require less than 200 PSI Never attempt to use the regulator to adjust any tank pressure over 200 PSI 1 Mounting the Inline Pressure Regulator Select a mounting location with a rigid mounting surface such as the bottom edge of a chassis Use the inline pressure regulator mounting bracket as a template to mark the two mounting points to be drilled Carefully drill the two holes as marked but do mount the Pressure Regulator at this time 2 Air Line Connections to Inline Pressure Regulator Use a 1 4 NPT compression fitting on the IN side of the regulator receiving air from the air tank On the OUT side of the regulator you may install a 1 4 NPT quick connect coupler or use another 1 4 NPT compression fitting to route the air line to the source of the item that pressure is being regulated to If you are plumbing to air locking differentials we have included two 1 8 BSP Female to 1 4 NPT Male Adapters for this use You may require a T fitting included depending on your application 3 Adjusting pressure 0 200 PSI The pressure regulator knob locks when pushed towards the unit To adjust
Download Pdf Manuals
Related Search