The Forever Cap FPC1419 Installation Guide
Contents
1. How Install a Prefab Chimney Cap Prefab Chimney Caps are made to fit over a wood or metal housing that surrounds a factory built double or triple chimney pipe First measure the length and wide of your housing Then select the right size prefab cap that will fit over your housing Second measure the inner opening of your chimney pipe The hole in the center of the prefab chimney cap is 7 So if your chimney pipe opening is 7 or less than this is the right cap to use If your chimney pipe opening is larger the 7 than you will need to order a custom size prefab cap with the right hole diameter so your chimney will draft properly Third make sure the chimney pipe is flush with the top of your chimney housing If it s not flush than you will need to cut the chimney pipe down or build up the chimney housing so that the housing is flush with the chimney pipe Fourth slide the prefab chimney cap over the housing Make sure it is sitting flat on all four sides of the housing Using 6 x 5 8 wood or sheet metal screws screw the prefab chimney to the housing on all four sides Please note installion screws DO NOT come with the prefab cap
Download Pdf Manuals
Related Search