SPT SF-3314MD Use and Care Manual
Contents
1. 2 Step 1 Remove the Fan Blade Cap from the Motor Shaft by turning clockwise Step 2 Remove the Rear Grill Locking Nut from the Motor Shaft by turning counter clockwise Step 3 Attach the Rear Grill The two top pegs will go through the two holes on the Rear Grill Secure the Rear Grill by tightening the Locking Nut back on to the Motor Shaft Turn clockwise to tighten Step 4 Slide the Fan Blade over the Motor Shaft The Fan Blade will only fit on the shaft one way The blades will be slightly curved towards the front Step 5 Secure the Fan Blade by placing the Fan Blade Cap onto the Motor Shaft Turn the cap counter clockwise to tighten DY D My D yy WZ M Step 6 Position the small forked tab over the center most grill spoke of the Rear Grill Gently snap the Front and Rear Grill together using the grooves Add the Grill Lock to the bottom tab of Front Grill to ensure the two grills don t get released easily Step 7 Locate the Water Tank to the Main Housing when correctly positioned the Water Tank will lock into the Main Housing Attach the Water Tray to the bottom of the fan grills two ribs on Rear Grill two ribs on Front Grill The Water Tray is to catch possible moisture drops collected on the grills Friendly Reminder A hanger on the back of the neck is designed to place the remote controller K gt Kr A UTA ox CN es KO w 3 OPERATIO2. N Air Flow Angle Oscillation Manual Tilt Oscillation is an Electronic Control option by the control button on Motor Cover or Remote Controller Reception Angle of Remote Control Signal Receiver Signal Receiver Motor Cover Control Power Speed Control Knob 1 Press and hold the knob for 0 5 second to turn ON OFF unit 2 Rotate the knob to adjust fan speed Turn counter clockwise to speed up turn clockwise to speed down The fan has total 7 speed separations Oscillation Timer Button Set the desired auto shut off time by pressing Timer button There are three LED lights to indicate the selected timer 1 2 4 hours and can be accumulated up to 7 hours For instance when the 1 and 4 LEDs illuminated the Timer is set at 5 hours Oscillation Button Press the Oscillation button to turn ON OFF oscillation Power Control Press amp hold for 0 5S Speed Control Rotate Remote Control ON OFF Button Press to turn ON OFF unit Transmitter Oscillation Button Press the Oscillation button to turn ON OFF oscillation Control Panel Mist Control Button Press the Humidifier Control Button to turn ON OFF humidifier When unit first turned on the default setting is humidifying Speed Control Button Press the button to adjust fan speed fT Timer Button Set the desired auto shut off time by pressing Timer button DO NOT use a
3. SF 3314MD DC MOTOR MISTHVG RAN WITH REMOTE CONTROL OWNER S MANUAL 14 DE MOTOR FAN WITH REMOTE CONTROL Thank you for the purchase of your new SPT product Please thoroughly read and maintain this manual for future reference IMPORTANT SAFETY INSTRUCTIONS e Close supervision is necessary when the appliance is to be used by or near children e NEVER leave a child unattended when the appliance in use e Avoid placing any object or fingers in or near the fan grill during operation personal injury and or damage to the appliance may occur Do not operate any fan with a damaged cord or plug Discard fan or return to an authorized service facility for examination and or repair Do not run cord under carpeting Do not cover cord with throw rugs runners or similar coverings Do not route cord under furniture or appliances Arrange cord away from traffic area and where it will not be tripped over e Do not immerse or spray any part of the appliance or cord in water or any other liquid electrical SHOCK may occur e This unit comes equipped with a polarized one blade is wider than the other plug This will only allow the plug to only fit into the 120 volt AC outlet one way Do not use an adapter to bypass this safety feature Doing so raises the risk of fire or electrical shock e Do not locate the appliance near curtains or other objects that may be drawn into the fan blade e Always use the appliance on a dry level su
4. equential damage caused by possible defects with this product Damage to product caused by improper power supply voltage accident fire floods or acts of nature e Failure of product resulting from unauthorized modifications to the product e Improper installation or failure to perform the necessary maintenance This GUARANTEE is in addition to your Statutory Rights Sunpentown International Inc 14625 Clark Ave City of Industry CA 91745 Tel 626 336 2299 e Fax 626 336 7116 service sunpentown com www sunpentown com
5. lkaline battery as it may reduce product lifetime Filling Water Tank Water refill indicator will illuminate RED LED when the mist function is activated and while water tank is empty To continue to use the mist function please follow the below steps to fill out water tank Step 1 Remove the water tank by pressing the release button and pull it straight up Step 2 Turn the water tank upside down so that the fill cap is facing up Unscrew the fill cap by turning it counter clockwise Step 3 Fill the water tank with COOL tap water Distilled water is recommended DO NOT USE HOT WATER Doing so may damage the humidifier function Step 4 Replace the fill cap by turning it clockwise DO NOT OVER TIGHTEN Step 5 Turn the water tank right side up Position the water tank into the main housing and push it to place When water tank is filled water refill indicator will turn into GREEN LED Once the filled tank has been positioned do not attempt to move the unit If it has to be moved unplug the unit and remove the water tank first CAUTION DO NOT POUR WATER INTO THE NOZZLE HOLE ON THE NECK OF THE UNIT DOING SO MAY DAMAGE THE UNIT OR CAUSE PERSONAL INJURY Water Tank Release Button 4 TECHNICAL SPECIFICATIONS Model No SF 3314MD Blade Size 14 inches 35cm Motor Type DC brushless motor Speed Separations 7 OFF Timer 1 to 7 hours Oscillation 60 degree Dimensio
6. n 17 x 16 1 x 42 1 Weight 12 8 Ibs Input Voltage 100 240VAC 50 60Hz Output Voltage 24VDC 2 7A Power Consumption 22W w o Misting 44W w Misting Water Tank Capacity 1 35L Mist Output approx 140 cc hr SEASON CARE AND STORAGE Cleaning The Unit 1 Turn the unit OFF and unplug the power cord from the power outlet Verify that the fan blade is no longer spinning 2 Cleaning the unit with a moistened soft cloth only DO NOT pour or splash water on the unit DO NOT use any abrasive or harsh cleaners as this may damage the unit 3 Be sure to clean all external surfaces include but not limit to the blade grills motor covers main housings water tank and base 4 Dry the unit include the humidifier part completely before storage DO NOT store the unit with water inside either the main housing or water tank 5 Store the unit in a cool try location WARNING To avoid serious injury from electric shock the unit must be turned OFF and unplugged prior to any cleaning or maintenance When disconnecting the power cord grip and pull the plug from the electrical outlet do not grip and pull from the power cord Cleaning The Metal Mist Generator Plate If the unit stops producing mist even while there is water in the tank or when the mist output has noticeably reduced after several use the mineral build up may need to be removed from the metal mist generator plate 1 Remove the water tank by pressing
7. rface Do not use the appliance on an unstable surface that is not heat resistant near heat sources or where water can come in contact with the appliance e This product is intended for indoor use only Do not attempt to use this appliance outdoors e Prior cleaning or if the product will not be in use for an extended period of time unplug the unit from the outlet Store in a cool dry place e Do not use harsh abrasives when cleaning this appliance WARNING To Reduce The Risk Of Fire Or Electrical Shock Do Not Use This Unit With Any External Timers or Electrical Relays or With Any Solid State Speed Control Device 1 2 PART LIST amp ASSEMBLY WARNING Do not attempt to use this product unless it is fully amp properly assembled Rear Grill Part List Remote Controller Fan Blade Front Grill MA a 7 Main Housing Power Cord X K Scat Watt Tank Water Tray lt Power Socket Water Level Window Assembly Part 1 Step 1 Remove the Base Locking Nut from the bottom of the main housing by turning counter clockwise Step 2 Insert the main housing into the base from the top When positioned correctly main housing will be locked into the base Step 3 Securely lock the main housing to the base by reapplying the Base Locking Nut Turn clockwise to tighten Main Housing Power Socket Power Cord Plug End Female End Base Locking Nut 2 Assembly Part
8. the release button and pull it straight up 2 Remove the Mist Generator Cover Press and slide the cover towards you 3 Use the attached brush to wipe the outer surface of the mist generator plate Some deposit may remain but should not interfere with the operation of the unit NOTE How often you should perform this special maintenance depends on the hardness of water you are using and how quickly the mineral deposits form on the interior surface of the humidifier DO NOT clean the mist generator under running water Doing so may cause damage to the unit or personal injury End of Season Storage 6 Your Guarantee If this product is found to be faulty as a result of faulty materials or work manship within one year from date of purchase it will be repaired free of charge This guarantee is subject to the following terms Sunpentown must be notified of the fault e Proof of purchase must be presented to Sunpentown s nominated representative e The warranty will be void if the product if modified misused or repaired by an unauthorized person e The warranty after repair will not be extended beyond the original one year period All replacement parts will be new or reconditioned e Parts which are replaced become the property of Sunpentown e The warranty applies for the use of the product in the USA only What is NOT COVERED e Warranty does not include freight charges e Incidental or cons
Download Pdf Manuals
Related Search