Home Decorators Collection 2311400410 Instructions / Assembly
Contents
1. DECORATORS COLLECTION 23114 SK17954B2r1 4 2 DRAWER MOBILE CART 36 Hx25 Wx12 D ASSEMBLY INSTRUCTIONS Made In China 1 17 Thank vou for purchasing this qualitv product Be sure to check all packing material carefully for small parts which may have came loose inside the carton during shipment Count all parts and material hardware then compare with parts list to be sure all parts are present any parts are missing damaged please contact our Customer Service Department for efficient and speedy service Please indicate the model number and code letter of part s needed IMPORTANT NOTE Follow instructions listed below in proper sequence as numbered to assure fast easy and correct assembly RI DOWN FIXED PANEL 1PC BACK FIXED PANEL 1PC BOTTOM PANEL 1PC NS DRAWER DRAWER FRONT PANEL 2PCS LEFT SIDE PANEL 2PCS RIGHT SIDE PANEL 2PCS 2 17 IS DRAWER DRAWER BOTTOM SUPPORT 2PCS BOTTOM PANEL 2PCS NOTE THE SURFACE WITH THE STICKER IS THE BACK SIDE 3 17 WOOD DOWEL 30PCS LOCK BOLT 26PCS CAM LOCK 26PCS LONG SHORT PLASTIC COVER 4PCS PLASTIC COVER 4PCS PLASTIC COVER 4PCS 1 FLAT 5 8 FLAT ROUND HEAD SCREW 18PCS HEAD SCREW 10PCS HEAD SCREW 16PCS UNIVERSAL WHEEL 1 2PCS UNIVERSAL WHEEL 2 2PCS RECTANGLE 1 2 L FLAT PLASTIC ANCHOR PLASTIC 1 1 2 L FLAT METAL PLATE HEAD SCREW BAND HEAD SCREW ANTI TIPPING HARDWARE PACKAGE2. NOTE THE SURFACE WITH THE STICKER IS THE BACK SIDE HOW SEPARATE GLIDES PRIOR TO ASSEMBLV WE SUGGEST SEPARATING THE INNER GLIDES FROM THE OUTER GLIDES SIMPLV PULL THE LEFT RIGHT INNER GLIDES FROM THE OUTER GLIDES EXPOSING A SMALL BLACK SAFETV RELEASE TAB BV PUSHING THE SAFETV RELEASE TAB VOU WILL BE ABLE TO SEPARATE THE GLIDES 5 17 NOTE UPON OPENING THOROUGHLY CLEAN ALL WOOD SURFACES TO REMOVE DUST AND DIRT THAT MAY HAVE SETTLED ONTO THE FINISH DURING SHIPMENT IN ORDER TO PREVENT DAMAGE DURING ASSEMBLY PLEASE ASSEMBLE THIS ITEM WITH AT LEAST TWO PEOPLE NOTE TURN THE CAM BOLT SCREWS UNTIL THEY ARE TIGHT THE SHOULDER SHOULD BE AGAINST THE SURFACE OF THE PART HOW TO USE THE CAM TOOL NOTE e THE ARROWS ON THE HIDDEN CAM LOCKS SHOULD POINT TO THE CAM BOLTS 6 17 _ e DOWN FIXED PANEL INSERTED INTO THE DOWN MIDDLE PANEL D 7 17 INSTALL THE WOOD DOWEL AND THE CAM LOCK BOLT b INTO THE FRONT FIXED PANEL F AND THE BACK FIXED PANEL G e JOIN THE FRONT FIXED PANEL F AND THE BACK FIXED PANEL G TO THE DOWN MIDDLE PANEL D BV USING WOOD DOWEL a FIRST e TIGHTEN THE CAM LOCK BOLT b WITH THE CAM LOCK c FROM PRE DRILLED HOLES e COVER THE CAM HOLES WITH PLASTIC COVER e 8 17 e INSTALL THE WOOD DOWEL AND THE CAM LOCK BOLT b INTO THE LEFT SIDE PANEL e JOIN THE LEFT SIDE PANEL B TO THE ASSEMBLED PART BY USING WOOD
3. DOWEL FIRST e TIGHTEN THE CAM LOCK BOLT b WITH THE CAM LOCK c FROM PRE DRILLED HOLES 9 1 _ e INSTALL THE WOOD DOWEL AND THE CAM LOCK BOLT b INTO THE RIGHT SIDE PANEL e JOIN THE RIGHT SIDE PANEL C TO THE ASSEMBLED PART BV USING WOOD DOWEL a FIRST e TIGHTEN THE CAM LOCK BOLT b WITH THE CAM LOCK c FROM PRE DRILLED HOLES 10 17 _ e INSTALL THE WOOD DOWEL AND THE CAM LOCK BOLT b INTO THE TOP PANEL e JOIN THE TOP PANEL A TO THE ASSEMBLED PART BV USING WOOD DOWEL a FIRST e TIGHTEN THE CAM LOCK BOLT b WITH THE CAM LOCK c FROM PRE DRILLED HOLES 11 7 JOIN THE UNIVERSAL WHEEL amp TO THE BOTTOM PANEL USING 5 8 FLAT HEAD SCREW i FIRST e INSTALL THE WOOD DOWEL a AND THE CAM LOCK BOLT b INTO THE BOTTOM PANEL H e JOIN THE BOTTOM PANEL H TO THE ASSEMBLED PART BV USING WOOD DOWEL a FIRST e TIGHTEN THE CAM LOCK BOLT b WITH THE CAM LOCK c FROM PRE DRILLED HOLES e COVER THE CAM HOLES WITH PLASTIC COVER e AND THE LONG PLASTIC COVER d 12 17 e TIGHTEN THE BACK PANEL 1 THE ASSEMBLED PART USING THE 5 8 ROUND HEAD SCREW 9 13 17 _ INSTALL THE WOOD DOWEL AND THE LOCK BOLT b INTO THE DRAWER FRONT PANEL J e JOIN THE DRAWER LEFT SIDE PANEL K AND THE DRAWER RIGHT SIDE PANEL L DRAWER BOTTOM SUPPORT TO THE DRAWER FRONT PANEL 9 e ONCE JOINED
4. TIGHTEN CAM LOCK c ONTO THE CAM LOCK BOLT b USING PRE DRILLED HOLES COVER HOLES WITH THE SHORT PLASTIC COVER e SLIDE THE DRAWER BOTTOM PANEL O INTO THE GROOVES ON THE DRAWER LEFT SIDE PANEL K AND THE DRAWER RIGHT SIDE PANEL L 14 17 e INSTALL THE WOOD DOWEL INTO THE DRAWER BOTTOM SUPPORT e JOIN THE DRAWER BACK PANEL N TO THE ASSEMBLED DRAWER PART AND TIGHTEN THE DRAWER BACK PANEL BY USING THE 1 FLAT HEAD SCREW h THROUGH PRE DRILLED HOLES ON DRAWER SIDE PANELS e TIGHTEN THE DRAWER BOTTOM SUPPORT M BV USING THE 1 FLAT HEAD SCREW h THROUGH PRE DRILLED HOLES ON THE DRAWER BACK PANEL N 15 17 _ e INSERT DRAWERS INTO THE ASSEMBLED PART e TIGHTEN THE RECTANGLE METAL PLATE 1 TO THE REAR OF THE TOP PANEL A BV USING 1 2 FLAT HEAD SCREW 2 e PLACE THE ASSEMBLED MOBILE CART AT THE DESIRED POSITION MARK THE INSERTION POINTS FOR THE PLASTIC ANCHOR 3 e USING THE PROPER HARDWARE FOR VOUR WALL TVPE AND DRILL 1 4 HOLES INTO THE WALL e TIGHTEN THE RECTANGLE METAL PLATE 1 TO THE PLASTIC ANCHOR 3 USING THE 1 1 2 FLAT HEAD SCREW 5 16 17 e USING THE PLASTIC BAND 4 CONNECT TWO RECTANGLE METAL PLATES 1 17 17
Download Pdf Manuals
Related Search