Home Decorators Collection 1062200910 Instructions / Assembly
Contents
1. NOTE e UPON OPENING THOROUGHLY CLEAN ALL WOOD SURFACES REMOVE DUST AND DIRT THAT MAY HAVE SETTLED ONTO THE FINISH DURING SHIPMENT IN ORDER TO PREVENT DAMAGE DURING ASSEMBLY PLEASE ASSEMBLE THIS ITEM WITH AT LEAST TWO PEOPLE NOTE TURN THE CAM BOLT SCREWS UNTIL THEY ARE TIGHT THE SHOULDER SHOULD BE AGAINST THE SURFACE OF THE PART HOW TO USE THE CAM TOOL NOTE THE ARROWS ON THE HIDDEN CAM LOCKS SHOULD POINT TO THE CAM BOLTS 4 16 e TIGHTEN THE MAGNET ONTO THE LEFT DIVIDER AND THE RIGHT DIVIDER BY USING THE 5 8 L ROUND HEAD SCREW 9 5 16 e INSTALL THE WOOD DOWEL AND THE CAM LOCK BOLT b TO THE LEFT DIVIDER AND THE RIGHT DIVIDER F e JOIN THE LEFT DIVIDER E AND THE RIGHT DIVIDER F TO THE FIXED SHELF C BY USING THE WOOD DOWEL a FIRST e ONCE JOINED TIGHTEN CAM LOCK c ONTO BOLT b USING PRE DRILLED HOLES 6 16 e INSTALL THE WOOD DOWEL a AND THE CAM LOCK BOLT b THE BOTTOM PANEL e JOIN THE ASSEMBLED PART TO THE BOTTOM PANEL B BY USING THE WOOD DOWEL a FIRST e ONCE JOINED TIGHTEN CAM LOCK ONTO BOLT 5 USING PRE DRILLED HOLES e COVER CAM HOLES BY USING THE PLASTIC COVER 7 16 e INSTALL THE WOOD DOWEL THE FRONT CROSS BAR e JOIN THE LEFT SIDE PANEL L AND THE RIGHT SIDE PANEL M BY USING THE WOOD DOWEL a 8 16 e INSTALL THE WOOD DOWEL AND THE LOCK BOLT b THE BOTTOM PANEL2. e JOIN THE ASSEMBLED PART TO THE BOTTOM PANEL B BY USING THE WOOD DOWEL a FIRST e ONCE JOINED TIGHTEN CAM LOCK c ONTO BOLT b USING PRE DRILLED HOLES e COVER CAM HOLES WITH THE PLASTIC COVER h 9 16 e INSTALL THE WOOD DOWEL AND THE CAM LOCK BOLT b THE TOP PANEL e JOIN THE ASSEMBLED PART TO THE TOP PANEL A BY USING THE WOOD DOWEL a FIRST e ONCE JOINED TIGHTEN CAM LOCK c ONTO BOLT b USING PRE DRILLED HOLES e COVER CAM HOLES WITH THE PLASTIC COVER h 10 16 e TIGHTEN THE FRONT CROSS BAR THE TOP PANEL BY USING THE 11 FLAT HEAD SCREW e 11 16 TIGHTEN THE LEFT BACK PANEL 1 THE CENTER BACK PANEL J AND THE RIGHT BACK PANEL TO THE ASSEMBLED PART BY USING THE METAL PLATE 1 AND THE 5 8 L ROUND HEAD SCREW 9 12 16 e ATTACH THE LEFT DOOR AND THE RIGHT DOOR H TO THE ASSEMBLED PART BY USING THE 1 2 L FLAT HEAD SCREW g e TIGHTEN THE KNOB i ONTO THE LEFT SIDE DOOR G AND THE RIGHT SIDE DOOR H BY USING THE KNOB BOLT j 13 16 ud di 2 3 TIGHTEN THE RECTANGLE METAL PLATE 1 THE REAR END OF THE TOP PANEL BY USING THE 1 2 L FLAT HEAD SCREW 2 e PLACE THE ASSEMBLED UNIT AT THE DISIRED POSITION MARK THE INSERTION POINTS FOR THE PLASTIC ANCHOR 3 e USING THE PROPER HARDWARE FOR YOUR WALL TYPE DRILL 1 4 HOLE INSERT THE PLASTIC ANCHOR 3 INTO THE WA
3. LL TIGHTEN THE RECTANGLE METAL PLATE 1 TO THE PLASTIC ANCHOR 3 BY USING 1 1 2 L FLAT HEAD SCREW 5
4. sa 2 Q an DECORATORS COLLECTION Thank you for purchasing this quality product Be sure to check all packing material carefully for small parts which may have came loose inside the carton during shipment Count all parts and material hardware then compare with parts list to be sure all parts are present If any parts are missing or damaged phone fax or mail to our Customer Service Department for efficient and speedy service Please indicate the model number and code letter of part s needed IMPORTANT NOTE Follow instructions listed below in proper sequence as numbered to assure fast easy and correct assembly PARTS LIST TOP PANEL 1PC FIXED SHELF 2PCS ADJUSTABLE SHELF 4PCS RIGHT DIVIDER 1PC LEFT DOOR 1PC LEFT BACK PANEL 1PC lt gt lt gt CENTER BACK PANEL 1PC RIGHT BACK PANEL 1PC LEFT SIDE PANEL 1PC 2 16 RIGHT SIDE PANEL 1PC t CAM LOCK BOLT 24PCS 8 11 FLAT HEAD SCREW 2PCS 7 PLASTIC COVER 16PCS MAGNET 2PCS METAL PLATE 6PCS FRONT CROSS BAR 1PC CAM LOCK 24PCS QD SHELF PIN 16PCS 2 lt gt RECTANGLE METAL PLATE PLASTIC BAND WOOD DOWEL 26PCS 5 8 L ROUND HEAD SCREW 38PCS re 1 2 L FLAT HEAD SCREW 8PCS J KNOB BOLT 2PCS y 2 amp 3 1 2 FLAT PLASTIC ANCHOR HEAD SCREW 1 1 2 L FLAT HEAD SCREW ANTI TIPPING HARDWARE PACKAGE NOTE THE SURFACE WITH THE STICKER IS THE BACK SIDE 3 16
Download Pdf Manuals
Related Search