Home

Home Accents Holiday 36681 Instructions / Assembly

image

Contents

1. Safety Information IMPORTANT SAFETY INSTRUCTIONS When using electrical products basic precautions should always be followed including the following a READ AND FOLLOW ALL SAFETY INSTRUCTIONS b This is an electrical product not a toy To avoid risk of fire burns personal injury and electric shock it should not be played with or placed where small children can reach it c Do not use products outdoors unless marked suitable for indoor and outdoor use When products are used in outdoor applications connect the product to a Ground Fault Circuit Interrupting GFCI outlet If one is not provided contact a qualified electrician for proper installation d Not recommended for children under 3 years of age As with all electrical products precautions should be observed during handling and use to reduce the risk of electric shock If the supply cord is damaged it must be replaced by the manufacturer its service agent or similarly qualified per sons in order to avoid a hazard e Adults Note Periodically examine this product for damage to the cord housing or other parts that may result in the risk of fire electric shock or injury If the product is damaged do not use it DANGER To prevent electric shock do not immerse in water wipe clean with damp cloth Immersing this product can result in an electric shock This product is not intended for permanent installation or use h Do not mount or place near gas or el
2. fully inflate Step 2 Using the loops attached at the bottom of the Inflatable unit A insert stakes C into the ground Pre Operation This power unit is intended to be correctly orientated in a vertical or floor mount position When using electrical products basic precautions should always be practiced including the following a READ AND FOLLOW ALL SAFETY INSTRUCTIONS b Read and follow all instructions that are on the product or provided with the product c For a cord connected or direct plug in power unit do not use an extension cord d Reference the National Electrical Code ANSI NFPA 70 specifically for the installation of wiring and clearances from power and lighting conductors e Installation work and electrical wiring must be done by qualified person s in accordance with all applicable codes and standards including fire rated construction f For a cord connected or direct plug in power unit do not install or use within 10 feet of a pool g For a cord connected or direct plug in unit do not use in a bathroom h For a direct plug in or cord connected power unit marked in accordance with 65 2 WARNING Risk of Electric Shock When used outdoors install only to a covered Class A GFCI protected receptacle that is weatherproof with the power unit connected to the receptacle If one is not provided contact a qualified electrician for proper installation Ensure that the power unit and cord do not
3. desired operation CAUTION Changes or modifications not expressly approved by the party responsible for compliance could void the user s authority to operate the equipment Operation continued NOTE This equipment has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules These limits are designed to provide reasonable protection against harmful interference in a residential installation This equipment generates uses and can radiate radio frequency energy and if not installed and Used in accordance with the instructions may cause harmful interference to radio communications However there is no guarantee that interference will not occur in a particular installation If this equipment does cause harmful interference to radio or television reception which can be determined by turning the equipment off and on the user is encouraged to try to correct the interference by one or more of the following measures eReorient or relocate the receiving antenna Increase the distance between the equipment and receiver Connect the equipment into an outlet on a circuit different from that to which the receiver is connected Consult the dealer or an experienced radio TV technician for help Care and Cleaning a Wipe the unit with a damp cloth and allow the unit to dry before storing If necessary you can use a mild detergent b Store the product neatly in a cool d
4. ectric heaters fireplaces candles or other similar sources of heat Do not secure product wiring with staples or nails or place on sharp hooks or nails Do not let lamps rest on the supply cord or on any wire Unplug the product when leaving the house when retiring for the night or if left unattended Do not use this product for other than its intended purpose m Do not hang ornaments or other objects from cord wire or light string Do not close doors or windows on the product or extension cords as this may damage the wire insulation o Do not cover the product with a cloth paper or any material not part of the product when in use p Do not place the product against carpeting furniture or any other fabric when in use Read and follow all instructions that are on the product or provided with the product SAVE THESE INSTRUCTIONS Q aa A Q Package Contents Quantity Inflatable unit Pp B Tethers _ 4 C Stakes 8 D UL listed Power supply POWER SUPPLY Input 120V 50 60Hz Output 12 0V 1500mA INFLATABLE INSTRUCTIONS Installation Preparing for Installation Step 1 Remove contents from packaging Step 2 Remove all plastic fasteners and tags These are part of the packaging and should be discarded Step 3 Connect adapter into connection of fan Securing the unit to the ground Step 1 Zip zipper at base of fan Inflatable unit A will then
5. interfere with completely closing the receptacle cover Pre Operation continued i For a permanently connected power unit marked in accordance with 65 2 WARNING Risk of Electric Shock When used outdoors install only on a circuit protected by a Class A GFCI j WARNING Risk of Fire Installation involves special wiring methods to run wiring through a building structure Consult a qualified electrician k For a unit intended to be mounted greater than 0 30 m 1 foot from the ground surface WARN N G Risk of Electric Shock Mount the unit at a height greater than 1 foot from the ground surface SAVE THESE INSTRUCTIONS This manual contains important safety and operating instructions for power units Operation Inflating the unit Step 1 Attach tethers B to the inflatable unit A Step 2 Insert the stakes C into the ground so the tethers B are taut Step 3 Your inflatable unit A is weighted at the base with a sealed weight bag Adjust weight bag to position your inflatable unit A as desired NOTE To deflate unplug the unit For faster deflation unzip the zipper on the unit after you unplug it For indoor and outdoor use WARNING This device complies with Part 15 of the FCC Rules Operation is subject to the following two conditions 1 this device may not cause harmful interference and 2 this device must accept any interference received including interference that may cause un
6. ry location protected from sunlight c Carefully remove the product from wherever it is placed This helps to avoid any undue strain or stress on the product conductors connections and wires Troubleshooting Problem The unit is not inflating a Ensure that the zipper on the unit is completely closed b The power source is disabled or the cord may be unplugged c Something may be blocking the fan s air intake Problem The unit is torn a You can hand sew tears with any type of thread or use clear packing tape to cover the tear Problem There is a delay after pluging in the adapter a This is a protective feature built in to these adapters to protect your electrical circuit and the product A 2 3 seconds start up delay is normal SKU Model 1001300398 36681 MADE IN CHINA PRINTED IN CHINA DISTRIBUTED BY HOME DEPOT 2455 PACES FERRY RD N W ATLANTA GA 30339 FOR ASSISTANCE CALL 1 877 527 0313 HOMEACCENTSHOLIDAY COM

Download Pdf Manuals

image

Related Search

Related Contents

Data Sheet Final - ADSP-BF50x Blackfin  Sun Fire X2100 M2 Server Product Notes  

Copyright © All rights reserved.
Failed to retrieve file