MOEN DN2692CH Installation Guide
Contents
1. Glenshire Technical Specification Oval Tilting Mirror DN2692 Stock Numbers Dimensions q DN2692BN Oval Tilting Mirror wy m Brushed Nickel Finish i q DN2692CH Oval Tilting Mirror 23 S Chrome Finish EICHI AE raas A a Peo 4 q fia e33 Materials Installation Instructions Oval Tilting Mirror posts are constructed of zinc and mirror is constructed of 5MM thick glass 1 Position the mounting template on the wall in the desired location 2 Using a level align the template and tape it to the wall 3 Drill two 5 16 holes at each mounting post location 4 Remove the template from the wall 5 Fold ends of the plastic toggle together and insert into each hole in the wall 6 Lightly tap anchors until flush with the wall 7 One ata time insert plastic pin into each of the anchors and lightly tap to activate anchor Remove pin and repeat on all anchors 8 Remove mounting plates from the product assemblies by loosening each setscrew 9 One ata time place each mounting plate over anchors with UP facing you and insert screws through plate into anchors 10 Tighten screws 11 Loosen the 2 small screws on each of the end posts 12 With the back of the mirror facing you slide both end posts into position on the mirror Align the screws with the holes in the back plates Tighten all 4 Screws 13 Place entire mirror assembly over the mounting plates on the wall setscrews facing down2. Tighten setscrews Cleaning Instructions To preserve the fine finish of this product clean only with a soft damp cloth Dry well Do not use commercial or abrasive cleaners Stock Number Oval Tilting Mirror By Creative Specialties 25300 AL MOEN DRIVE e NORTH OLMSTED OH 44070 CORPORATE HEADQUARTERS 800 321 8809 FAX 800 848 6636 INTERNATIONAL 440 962 2000 FAX 440 962 2726 CUSTOMER SERVICE USA 800 882 0116 FAX 888 379 2720 WWW CSI MOEN COM Copyright Creative Specialties International 2006 Literature BA1350 International
Download Pdf Manuals
Related Search