PULSE Showerspas 1022-B Installation Guide
Contents
1. SHOWERSPAS Leilani ShowerS Model 1022 B Owner s Manual Leilani ShowerSpa Model 1022 B Please Read The Following Instructions COMPLETELY Before Beginning Our goal is to ensure your installation goes smoothly and safely Please read these instruc tions carefully and follow recommendations for plumbing and mounting After reading instructions if you determine you do not have the necessary skills and or tools we recommend that a licensed plumbing contractor complete the installation If you encounter any problems during installation CALL TECHNICAL SUPPORT TOLL FREE at 888 785 7320 Before returning your ShowerSpa to the store You Will Need The Following Tools Soft pencil or felt pen to mark tile Reciprocating saw w metal cutting blade Sawzall Phillips head screwdriver Channel locks or adjustable wrench Safety glasses Drill Preferably cordless Tape measure Y4 Masonry drill bit Level Product Dimensions Finished Wall Line lt _ _ 8 _ gt oe q gt 12 5 10 Holes For Mount Bracket 53 1 ShowerSpa 2 Showerhead 3 Shower Arm 4 Slide Bar 5 Bracket Parts Le Hex End 7 Hand Shower 8 Hand Shower Holder 9 Hand Shower Hose 10 Machine Screw 11 Lock Washer 12 Rubber Washer 13 Mount Bracket 14 Mounting Screw 15 Nylon Anchor Some Assembly is Required P2. ct in workmanship and or materials for a period of three years from the date of purchase This warranty extends to the original purchaser only and is non transferable This warranty does not cover and PULSE ShowerSpas will not pay for any conditions malfunctions or damages resulting from 1 normal wear and tear improper installation whether performed by a con tractor a service company or the consumer improper maintenance misuse abuse negligence accident or alteration 2 the use of abra sive caustic or no rinse cleaning agents 3 the use of the product in any manner contrary to the product instruction 4 any condition in the home such as excessive water pressure or corrosion Should any ShowerSpa be determined by PULSE ShowerSpas Inc to be defective in normal residential use at the option of PULSE ShowerSpas Inc such product shall either be replaced or repaired and returned to the customer free of defects The consumer shall give notice of any defects to PULSE ShowerSpas Inc within thirty days of discovery of such defect Proof of purchase original sales receipt must be provided to PULSE ShowerSpas Inc with all warranty claims PULSE Shower Spas Inc is not responsible for any labor charges removal charges installation or other consequential costs In no event shall the liability of PULSE ShowerSpas Inc exceed the purchase price of the ShowerSpa Some states provinces do not allow limitations of how
3. long an im plied warranty lasts or the exclusion or limitation of such damages so these limitations and exclusions may not apply to you This warranty gives the consumer specific legal rights You may also have other rights that vary by state province Follow manufacturers recommended installation Use caution with children under ten years of age Do not use ShowerSpa as a support device Do not use harsh chemicals or abrasives when cleaning Turn water supply off when servicing your ShowerSpa PULSE SHOWERSPAS Pulse ShowerSpas Inc 49 Hangar Way Suite A Watsonville CA 95076 888 785 7320 info pulseshowerspas com www pulseshowerspas com support pulseshowerspas com Part 1013 GL OM ENG Rev Y2013 03 22
4. nes attach parallel to the wall t For a person 5 8 6 2 we recommend the stub outs be 37 above finished floor Before installation make certain that water is completely turned off to both hot amp cold supply lines of shower Mark location of holes for the mount making sure holes are level For a person 5 8 6 2 we recommend placing holes for the mount at 53 above finished floor Before drilling holes make certain that connecting to stub outs does not interfere with backside of ShowerSpa and it is flush with finished wall at desired mounting height New Construction or Extensive Remodel New Finished Wall Surface 1 Prior to sheetrock stub out 2 hot and cold supply lines beyond 6 Drill holes through wall surface using a masonry bit Drill slowly through wall surface to avoid cracking and chipping Insert anchors and securely screw brackets to wall Before con necting hot and cold supply lines hang the ShowerSpa on wall check the height and make sure the ShowerSpa is flush against wall with a secure fit 7 Connect hot and cold water supply lines to stub outs do not overtighten Before mounting the ShowerSpa check fittings to make sure they are secure Turn on water and check for leaks When fittings are leak free mount ShowerSpa on wall 8 OPTIONAL Seal around body of ShowerSpa with a bead of silicone DO NOT SEAL BOTTOM Retrofit Existing Shower Replacement NOTE In a remodel in which
5. rior to Installation Slide Bar Assembly Refer to exploded line drawing for reference 1 Hold slide bar 4 with grooves facing away from you Press button on hand shower holder 8 and place onto slide bar 4 with holder fac ing you and button on top 2 With slide bar 4 facing you align grooves on bracket 5 with grooves on back of slide bar 4 Screw holes on bracket 5 should extend to left side of bar Insert bracket 5 until flush with opening Push cap 6 into slide bar 4 opening Repeat for other end 3 Align assembled slide bar with pre drilled holes on right side of ShowerSpa Secure with machine screws 10 and lock washers 11 After ShowerSpa is Mounted to Wall Attach Hand Shower and Hose 1 Insert rubber washer 12 into hexagon shaped end of hand shower hose 9 and attach to threaded outlet on bottom of ShowerSpa DO NOT OVER TIGHTEN 2 Insert rubber washer 12 into tapered end of hand shower hose 9 and attach to hand shower 7 DO NOT OVER TIGHTEN Insert hand shower 7 into holder on slide bar 4 Attach Shower Head 3 Insert rubber washer 12 into showerhead 2 and hand tighten onto the shower arm 3 Installation finished wall surface 4 on center For best results attach 90 brass fittings available at most hardware stores to the stub outs maintaining 1 4 Y2 of space between the fitting and finished wall The open end of the 90 brass fittings should point down so the supply li
6. ting height of ShowerSpa determines or is determined by location of the 2 stub outs 3 The mounting height can vary depending on several factors i e location of supply lines interference from ShowerSpa plumbing old valve access area personal preference etc 6 Pressure Balance Mixing Valve The Leilani ShowerSpa is eqiuipped with a cUPC pressure balance mixing valve to adjust water flow and tem perature The valve automatically adjusts to changes in water pressure i e someone flushes a toilet keeping your temerature constant and preventing accidental scalding To turn on the ShowerSpa simply raise the handle until the desired flow rate is achieved Rotate to the right to decrease temperature and rotate to the left to increase temperature Be sure that the handle is in the OFF position when you are done using your ShowerSpa so that pressure does not build up inside the unit Brass Diverter The brass diverter is used to change between ShowerSpa functions Simply rotate the diverter knob either direc tion to select the desired function showerhead hand shower body jets or tub spout Body Jets The Leilani ShowerSpa comes with six dual function body jets Our new Select A Jet feature allows you to run between two and six body jets at once The top two jets are always on but the other four jets can be turned off independently increasing pressure to the remaining jets in use The jets have both a power spray and fine mist func
7. tion Simply rotate the face of the jet to select the different functions or turn them off Shower Arm The shower arm on the Leilani has a unique feature that allows you to change the height and angle of the showerhead The wingnut closest to the panel adjusts the height and the wingnut closest to the showerhead adjusts the angle Loosen one of the two wingnuts reposition the showerhead and retighten the wingnut The hand shower has three individual functions and two combo functions Rotate the head of the hand shower left or right to change between the power spray pulsating massage or gentle cascade functions To adjust angle of hand shower gently rotate toward you or toward the wall For vertical adjustment simply depress the button and slide holder up or down Always blot dry any water from the surface of your ShowerSpa To protect your ShowerSpa from hard water stains and mineral deposits use an auto spray wax periodically and wipe down your ShowerSpa after each use Allowing water to evaporate on the surface can lead to a buildup of mineral deposits Cleaning with a damp nonabrasive sponge and drying with a clean soft cloth should help keep your ShowerSpa looking beautiful REM EWM BER Never use any abrasives or harsh cleaners Clean with Mild Soap and Water ONLY To keep your ShowerSpa in pristine condition Dry after each use Manufacturer s Limited Warran PULSE Shower Spas Inc warrants that all ShowerSpas are free from defe
8. to the outside of wall cavity 4 on center For best results attach 90 brass fittings available at most hardware stores to the stub outs maintaining 14 v2 of space between the fitting and finished wall The open end of the 90 brass fittings should point down so the supply lines at tach parallel to the wall 7 Mark location of holes for the mount making sure holes are level For a person 5 8 6 2 we recommend placing holes for the mount at 57 above finished floor 8 Before drilling holes make certain that connecting to stub outs does not interfere with backside of ShowerSpa and it is flush with finished wall at desired mounting height 9 Drill holes through wall surface using a masonry bit Drill slowly through wall surface to avoid cracking and chipping Insert anchors and securely screw brackets to wall Before con necting hot and cold supply lines hang ShowerSpa on wall check the height and make sure ShowerSpa is flush against the wall with a secure fit 10 Connect hot and cold water supply lines to stub outs do not overtighten Before mounting the ShowerSpa check fittings to make sure they are secure Turn on water and check for leaks When fittings are leak free mount ShowerSpa on wall 11 OPTIONAL Seal around body of ShowerSpa with a bead of silicone DO NOT SEAL BOTTOM Additional fittings or longer supply lines may be necessary depending on your specific situation 2 The desired moun
9. you are not replacing the finished wall surface tile or backing material it is advisable to purchase a PULSE Show erSpa model that covers the location of your existing valve assembly either single handle or two handle type If your PULSE ShowerSpa model does not cover this area you will need to either choose another PULSE ShowerSpa model that does or make necessary repairs with appropriate materials i e wallboard tile fiberglass etc TURN OFF WATER SUPPLY TO SHOWER Typically there is a gate valve where the water main enters the house Turning the water valve off at hot water tank does not turn off cold water supply line Make certain water is completely turned off to both hot amp cold supply lines of shower Turn shower valve on both hot and cold to verify water supply is OFF Open a sink faucet in the bath room in which you are installing the ShowerSpa to relieve any pressure and help adequately drain shower supply lines Remove handle s and trim cover s of your existing shower valve exposing valve body in wall Locate hot and cold supply lines entering valve Using a recipro cating saw with sharp metal saw blade cut existing valve out preserving threads of the supply lines entering valve You should also cut the riser within wall supplying the existing showerhead Carefully twist and remove valve Unscrew old showerhead from shower arm then unscrew shower arm from wall Water lines must be extended
Download Pdf Manuals
Related Search