DreamLine DL-6150-01 Installation Guide
Contents
1. 6 Adjust the Glass doors 03 if it necessary Do the final adjustments of the assembled unit in the Wall profiles 01 Drill the holes from inside the shower into the first layer of the Wall Profile and the Glass profile using 01 8 drill bit ATTENTION Do not drill the profile throughout 2 only the first layer of the wall profile Secure the Glass profile to the Wall profile using the Round head screws ST4 2x10 07 Cover the exposed screw heads with the Decorative covers 08 Ct See Fig 8 for details Fig 8 CORNERVIEW Enclosure Rev 1 Ver 3 05 2013 7 Seal with silicone all the connections between the wall profiles and the wall bottom guide rail and the shower base Let the silicone dry for at least 24 hours before using the shower S See fig 9 for details Fig 9 Maintenance To insure long lasting life for your acrylic back walls wipe them off after each use with a soft cloth To clean the acrylic back walls use non abrasive sprays or cream based cleaners Never use abrasive cleansers metal brushes or scrapers that could scratch or dull the surface To insure long lasting life for your glass shower pro2. F CN LJ Fig 23 Product maintenance To insure long lasting life for your acrylic back walls wipe them off after each use with a soft cloth To clean the acrylic back walls use non abrasive sprays or cream based cleaners Never use abrasive cleansers metal brushes or scrapers that could scratch or dull the surface Acrylic cleaning procedure Acrylic should be cleaned with warm water and a clean nonabrasive cloth If desired a mild nonabrasive detergent may also be used Use only light pressure when cleaning Avoid rubbing dirt or grit into the surface Turn the cloth often and replace with a clean cloth frequently Dry by blotting gently with a clean dry cloth DO NOT USE Window cleaning sprays alcohol kitchen abrasive compounds or solvents such as acetone gasoline or thinners Do not use ammonia based cleaning solutions on the acrylic as it will eat into the surface and cause it to damage How do you get scratches out of Acrylic For light scratches use a buffing compound such as a car wax Use a buffer or slightly buff the surface by hand until scratches disappear Ver 1 Rev 1 15 DREAMLINE EXCLUSIVE LIMITED WARRANTY AS OF 6 2013 This warranty extends only to the original owner end user for household use only and is not tr
3. dream in style Cornerview Enclosure Base amp Wall Kit SHOWER ENCLOSURE SHOWER BASE AND BACKWALLS KIT INSTALLATION INSTRUCTIONS IMPORTANT DreamLine reserves the right to alter modify or redesign products at any time without prior notice For the latest up to date technical drawings manuals or any other details please refer to the support BathAuthority com web page N N N N N N N STEP 1 Install Shower Base Shower Base Installation Instructions STEP 2 Install Shower Backwalls Shower Backwalls Installation Instruction STEP 3 Install Shower Enclosure Shower Enclosure Installation Instruction Please read these instructions carefully before installing If you have any questions regarding installation please call our technical support specialists Monday through Friday 9 00 AM 5 00 PM EST at Phone 1 866 731 2244 Fax 1 866 227 1533 or e mail our technical support group at support QBathAuthority com For more information on DreamLine Shower Kit please visit www BathAuthority com ream in style CORNERVIEW SHOWER ENCLOSURE INSTALLATION INSTRUCTIONS IMPORTANT DreamLine reserves the right to alter modify or redesign products at any time without prior notice For the la
4. Fig 10 Ver 1 Rev 1 9 Mount the Corner cover 02 to the corner of the shower using the Countersunk screws ST4 2x30 07 Do not fully tighten the screws at this time leave them loose for further installation See Fig 12 and Fig 13 for details SLL ALA Ver 1 Rev 1 10 Apply the sealant to the entire surface of the reverse side of the Side panel 01 Also apply the sealant around the drilled holes See Fig 14 for details Ver 1 Rev 1 Fig 13 Fig 14 10 11 Slide the narrow edge of the Side panel d MN 01 behind the Corner cover 02 a Align trimmed edge of the Side panel s i SASS from Step 4 with the marked line on the NON OX wall in Step 2 and push the Side panel against the wall NOTE Make sure the drilled holes on the Side 4 panel are also aligned with the fixtures pu the wall See Fig 15 for details NL Fig 15 12 Apply sealant to the entire surface of the reverse side of the other Side panel 01 LC See Fig 14 for details 01 behind the Corner cover 02 Align trimmed edge of the Side panel E D from Step 4 with the marked line on the
5. AS YV ANNANS 220 0 GCG Typ IT kX S m SY S NS S S N X X OS S NS aN tet ee D NS Fig 5 Fig 6 D2 _ 5 Take exact measurements of 1 the fixture on the wall e from the 1 one inch line in the corner of the shower i to the fixture A B C e from the bottom of the wall of the shower to the fixture E F See Fig 7 for details 6 Determine which Side panel 01 will be installed on the side wall with the fixture Mark the fixture location on the Side panel according to the measurements taken in Step 5 See Fig 8 for details Ver 1 Rev 1 7 Drill the holes for the fixtures in the Side panel 01 using oN the proper diameter saw bit or a handheld jig saw Bub D2 See Fig 9 for details ML E Fig 9 Acrylic Side Panel Installation Instruction 8 Attach the Corner cover 02 to 1 P N 2 the corner of the shower and mark the drilling holes through the predrilled holes in the Corner cover Move aside the Corner cover Drill the holes using 25 16 drill bw bit and insert the Wall Anchors 7 EM L 06 See Fig 10 and Fig 11 for details
6. SLIMLINE SHOWER BASE Rev 3 Ver 4 05 2013 QUARTER ROUND SHOWER BASE DLT 7033330 33 33 21 5 8 DLT 7036360 36 x36 21 5 8 DLT 7038380 38 x38 21 5 8 SLIMLINE SHOWER BASE Rev 3 Ver 4 05 2013 DOUBLE THRESHOLD SHOWER BASE Corner Drain Configuration MODEL SPECIFICATION W in C in DLT 1032320 37x37 DLT 1036360 SLIMLINE SHOWER BASE Rev 3 Ver 4 05 2013 Left Hand Drain Configuration WI1 D1 MODEL SPECIFICATION D1 in W1 in DLTA0M4B ir iX DLT 1036481 36 x48 DLT 1036601 36 x60 SLIMLINE SHOWER BASE Rev 3 Ver 4 05 2013 Right Hand Drain Configuration W1 D1 DLT 1034482 34 x48 MODEL SPECIFICATION D1 in W1 in 6 DLT 1036482 36 x48 DLT 1036602 36 x60 SLIMLINE SHOWER BASE Rev 3 Ver 4 05 2013 10 Diagram of the Shower Base in a Cross Section Finished Wall board Shower Base OOOO Mortar Plaster 2 x4 Stud Drain 2 PVC Waste Pipe SLIMLINE SHOWER BASE Rev 3 Ver 4 05 2013 11 Shower Base Installation Preparation 1 Ensure that the floor and the studs are at right angle Provide a 5 x5 opening in the sub floor for the drain The 2 PVC waste pipe should extend above the surface of the sub floor according to the drain installation instructions and the height of the Shower base Refer to the product drawings in these installation instructions for the drain location See Fig 1 and
7. pw 2 wall in Step 2 and push the Side panel x A b LAIT Align the top of both Side panels and the Vh a NN a a Back panel before the sealant sets Apply equ pressure to or ihe p apr Acrylic panels from top to bottom See Fig 16 for details Fig 16 Ver 1 Rev 1 14 Once Side panels 01 aligned fasten tight the Corner cover 02 to secure the Side panels Cover the screw holes with the Decorative cover 08 See Fig 17 for details ATTENTION Prior to the next step please be sure the part of the wall for installation of the Decorative edge molding 03 is clean dry and free from soap oil and any construction debris 15 Gently remove the plastic tape from the adhesive side of the Decorative edge molding 03 and firmly press it to the edge of the Side panel 02 from top to bottom See Fig 18 for details Ver 1 Rev 1 Fig 17 1 Side Panel Decorative Molding Side Panel 2 p Wall 2 Decorative Molding 4 Fig 18 m 16 Apply caulk along the top edge of the Side y M panels 01 and along the connection of 15 the bottom e
8. and DreamLine is not responsible for code compliance standards for your project and will not accept any returns 3 Please ensure that prior to the installation the installation surface is leveled and solid and will be able to support the total weight of the unit Also make sure the walls are at right angles Irregular installation surface level or improper angle of side walls will result in serious problems for your installation Please note that some adjustments and drilling might be necessary during the installation process 4 This unit has to be installed against a finished floor and walls 5 Please NOTE This door has 1 2 out of plumb adjustment on each side Make sure your walls are at right angles Tools Required y Tape Philips LY Drill bit Drill bit Caulk Measure Pencil Screwdriver 0 5 16 9 1 8 9 2 li NX ON Ss Caulk Electric NO n Level Gun Dil Hammer Knife CORNERVIEW Enclosure Rev 1 Ver 3 05 2013 2 Detailed Diagram of Shower Enclosure Components lt Packing List _02 Stationary glass assembly 2pcs 08 Decorativecover 4set 03 Glass door 11111 2pcs 09 Wallanchor Round head screw ST4 2x30 06 FlatheadscrewST42x10 4pcs Bolt M5x8
9. EST at Phone 1 866 731 2244 Fax 1 866 227 1533 or e mail our technical support group at support BathAuthority com For more information on DreamLine Shower Bases please visit www BathAuthority com Preparation 1 Examine boxes and packages for shipping damage Carefully remove Shower base from the packaging and check for any visual defects or shipping damages If the unit has been damaged has a finishing defect or has missing parts please contact our customer support department within 5 business days of the delivery date Please note that DreamLine will not replace any damaged products or missing parts free of charge after 5 business days or if the product has been installed Feel free to contact DreamLine if you have any questions Install all of the required plumbing and drainage before installing the shower Use a competent and licensed if required by local code plumber for all plumbing installation Please note that you should consult your local building codes with questions on installation compliance standards Building and plumbing codes may vary by location and DreamLine is not responsible for code compliance standards for your project Please insure that prior to the installation the installation surface is leveled and solid and will be able to support the total weight of the unit Also make sure the walls are at right angles While some adjustment in leveling of the tray is possible irregular installation surface lev
10. Fig 2 for details SLIMLINE SHOWER BASE Rev 3 Ver 4 05 2013 2 PVC Waste Pipe 5 5 Opening See Product Chart for Drain Location Fig 1 x 2 PVC Waste Pipe 5 x5 Opening See Product Chart for Drain Location Fig 2 12 2 Install the shower drain NOT PROVIDED according to the drain installation manual supplied with the drain See Fig 3 for details 3 Place the tray the designated position so that the Drain Body drops around the Drain Pipe and butt the Shower Base up against the studs See Fig 4 for details Lift and lower base over the center of The drain pipe and set it into the place Fig 4 SLIMLINE SHOWER BASE Rev 3 Ver 4 05 2013 13 4 Level the tray and place marks on the studs above the upper edge of the tile flange See Fig 5 for details Level base in two directions Fig 5 5 Mix the bedding material Mortar Plaster etc Concrete is not recommended Apply enough bedding material to support the entire bottom of the shower base See Fig 6 for details Mortar Plaster Fig 6 SLIMLINE SHOWER BASE Rev 3 Ver 4 05 2013 14 6 After the bedding material has been poured and before it sets place the shower base into the position with the drain assembly sliding over the PVC waste pipe It will be necessary to push the shower base until the top of the tile flange aligns with the marks drawn on the studs and the front edg
11. KWALL SHOWER CABINS JETTED amp STEAM DreamLine warrants shower backwalls and shower cabins to be free from defects in workmanship for a period of one 1 year from initial date of purchase by the owner end user contractor or builder from an authorized dealer SHOWER amp TUB DOORS SHOWER ENCLOSURES DreamLine warrants shower doors tub doors and shower enclosures to be free from defects in workmanship and materials under normal residential use for a period of five 5 years from the initial date of purchase by the owner end user contractor or builder from an authorized dealer Warranty for plastic strips shall be limited to one 1 year Warranty for any part in Oil Rubbed Bronze finish shall be limited to one 1 year SHOWER BASES DreamLine warrants shower bases to be free from defects in workmanship and materials under normal residential use for as long as the original consumer purchaser owns their home in which their product is installed SHOWER COLUMNS DreamLine warrants shower columns to be free from defects in workmanship and materials under normal residential use for a period of one 1 year from the initial date of purchase by the owner end user contractor or builder from an authorized dealer SHOWER SEATS DreamLine warrants shower seats to be free from defects in workmanship and materials under normal residential use for a period of one 1 year from the initial date of purchase by the owner end user contractor or builder from an au
12. NOTE Unpack your unit carefully and inspect it Lay it out and identify all parts using parts diagram and part list in your manual as a reference Before discarding the carton check for small hardware bags that tend to fall to the bottom of the box If any parts are damaged or missing please contact DreamLine for replacement NOTE Retain these installation instructions for future reference CORNERVIEW Enclosure Rev 1 Ver 3 05 2013 Shower Enclosure Installation NOTICE ND pt T D The shower enclosure has to be installed against the p D gt Lon finished walls and installed shower base or threshold m A 1 Draw the line on the wall according to your Shower lt S Enclosure model size Place the Wall profiles 01 onto the Shower base J 1 threshold against the finished wall level it vertically See Fig 1 for details 2 Mark the drilling holes on the wall through the 1 predrilled holes in the Wall profile 01 and drill the holes in the wall using 5 16 drill bit and insert the Wall anchor 09 Run a silicone bead along the holes and around the holes on the wall Attach the Wall profile to the wall using Big head ay screw ST4 2x30 05 Casio Ze ee Fig 2 for details Fig 2 CORNE
13. RVIEW Enclosure Rev 1 Ver 3 05 2013 3 CORNERVIEW Enclosure Rev 1 Ver 3 Insert the Rail connector 04 into the guide rails of the Stationary glass assembly 02 Drill the hole into the first wall of the Rail connector through predrilled hole on the guide rails using 01 8 drill bit Fasten top and bottom Rail connectors to the guide rails with Flat head screw ST4 2x10 screws 06 See Fig 3 and Fig 4 for details NOTE To prevent braking down the Rail connector do not overtight the screws 05 2013 Fig 4 4 Carefully carry the assembled Stationary glass panels 02 onto the Shower base and insert side lt ONU edges into the Wall profiles 01 ane See Fig 5 for details gt gt 5 Insert two Door wheels 11 into the groove of the upper guide rail then suspend the Glass door 03 onto the Wheels and fasten them together with the Bolts M5x8 10 See Fig 6 and Fig 7 for details Repeat the same step for the bottom guide rail 2 Fig 6 CORNERVIEW Enclosure Rev 1 Ver 3 05 2013 6
14. ance of 1 one inch from the corner and draw a plumb vertical line from top to bottom See Fig 2 for details vm Fig 2 Ver 1 Rev 1 2 Measure the walls of the shower from the 1 one inch line in the corner from Step 1 to the points where you want Side panels 01 to end The distances are D1 and D2 NOTE D2 Shows wall with the fixture BE See Fig 3 for details 3 Determine the position of both we Side panels 01 D1 D2 uo TE n LC p a The narrow edge of the Side X Sw e C MCN panels fits behind the corner CE ole we cover and cannot be trimmed b The wide edge of the Side panel can be trimmed to the size of your measurements from step 2 Measure from the narrow edge of the Side panel and place a mark at a distance of D1 and D2 that you measured in Step 2 Draw a straight line from top to bottom along the wide edge of the Side panel See Fig 4 for details Fig 4 Ver 1 Rev 1 5 4 Place the Side panel 01 on a flat piece of plywood or particle board Use a sharp industrial knife and a T square to score along the marked wide ends of the Side panel and continue scoring until you have fully cut through the panel See Fig 5 and Fig 6 for details Ver 1 Rev 1
15. ansferable to a subsequent owner This warranty extends for a designated period of time so long as it remains in use in its original place of installation This warranty applies only to DreamLine products purchased from an authorized dealer in United States or Canada Proof of purchase original sales receipt from the original consumer purchase must be provided with all warranty claims IN NO EVENT SHALL THE LIABILITY OF DREAMLINE EXCEED THE PURCHASE PRICE OF THE UNIT DreamLine products must be installed by a fully insured and licensed professional Installation of DreamLine product by anyone other than fully insured licensed professionals shall VOID THE WARRANTY DreamLine recommends that such licensed professionals have experience in the installation of bathroom products Installation of certain products including without limitation glass products i e shower and tub doors by an inexperienced installer may result in glass breakage and consequently cause personal injury or death PARTS ONLY WARRANTY This warranty is extensive in that it covers replacement of all defects LABOR CHARGES AND OR DAMAGE INCURRED IN INSTALLATION REPAIR OR REPLACEMENT AS WELL AS ANY OTHER KIND OF LOSS OR DAMAGE ARE EXCLUDED COMMERCIAL USE AND OTHER EXCLUSIONS This warranty excludes all industrial commercial and business usage whose purchasers are hereby extended a one 1 year limited warranty from the date of purchase for shower and tub doors a three 3 month l
16. charged to customer Any product replaced or repaired during the warranty period will be covered only for the remaining period of the original warranty In no event will DreamLine be liable for costs of repair or replacement of any installation material including but not limited to tiles marble etc DREAMLINE IS NOT RESPONSIBLE FOR INSTALLATION REMOVAL OR REINSTALLATION COSTS OF ANY PRODUCT REQUIRING WARRANTY SERVICES Any modification or alteration of any DreamLine products will void the warranty DreamLine product installations and repairs must be performed by either a DreamLine authorized agent or a licensed insured and experienced professional contractor installation or repairs performed by any other party shall void the warranty This warranty shall not apply to breakage or damages caused by normal wear and tear fault carelessness abuse misuse misapplication improper maintenance alteration or modification of the unit as well as chemical or natural corrosion accident fire flood act of God or any other casualty Improper care and cleaning will void the warranty Use of cleaners containing abrasive cleansers ammonia bleach acids waxes alcohol solvents or other products not recommended for chrome or similar finish glass or acrylic will void the warranty For additional product maintenance instructions please refer to product installation manual DreamLine is not responsible for any issues arising in connection with errors or omissions in i
17. dges of the Side panels with AL X 7 4 the Shower base See Fig 19 for details ATTENTION Installation of QWALL 4 Acrylic shower wall is complete If you want to install Glass shelves 05 to your Shower follow to the next step Fig 19 Glass Shelves Installation Instruction 17 Determine the desired height for the Glass shelves 05 and mark the locations on the wall two in one corner or one in each E UN Nr See Fig 20 for details Fig 2 Ver 1 Rev 1 13 18 Mark the location for the Shelf brackets 04 according to the measurements in Fig 20 and Fig 21 1 Drill the holes using 05 16 drill bit and insert the Wall anchors 06 See Fig 21 for details 19 Mount the Shelf brackets 04 to the wall using the Countersunk screws ST4 2x 30 07 NOTE the padded set screw of the Glass bracket should be facing down Slide the upper Glass shelf 05 into the upper Shelf brackets and tighten the set screws at the bottom of the brackets Then slide the bottom Glass shelf in place Tighten the set screws on the bottom Shelf brackets as well See Fig 22 and Fig 23 for details Ver 1 Rev 1 3 1 2 3 1 2 5 3 1 2 x j E d 5 16
18. ducts wipe them off after each use with a soft cloth Rinse and wipe of the glass using either soft cloth or squeegee to prevent soap buildup Never use abrasive cleaners and cleaning products that contain scoring agent because this may scratch the surface Never use bristle brushes or abrasive sponges To assure a long lasting finish wipe off the metal parts after each use with a soft cloth Do not use abrasive cleaners or cleaning products containing ammonia bleach or acid If accidentally used rinse the surface as soon as possible to prevent finish peeling or corrosion After cleaning the shiny finishes rinse thoroughly and wipe dry with soft cloth Clean stainless steel surfaces at least once a week When applying stainless steel cleaner or polish work with not across the grain Never use abrasive sponge or cloth steel wool or wired brushes CORNERVIEW Enclosure Rev 1 Ver 3 05 2013 lt BREAMLINE ream in style SLIMLINE SHOWER BASE SHOWER BASE DIMENSIONS AND INSTALLATION INSTRUCTIONS IMPORTANT DreamLine reserves the right to alter modify or redesign products at any time without prior notice For the latest up to date technical drawings manuals or any other details please refer to the support BathAuthority com web page Please read these instructions carefully before installing If you have any questions regarding installation please call our technical support specialists Monday through Friday 9 00 AM 5 00 PM
19. e Never use bristle brushes or abrasive sponges To assure a long lasting finish wipe off the metal parts after each use with a soft cloth Do not use abrasive cleaners or cleaning products containing ammonia bleach or acid If accidentally used rinse the surface as soon as possible to prevent finish peeling or corrosion After cleaning the shiny finishes rinse thoroughly and wipe dry with soft cloth Clean stainless steel surfaces at least once a week When applying stainless steel cleaner or polish work with not across the grain Never use abrasive sponge or cloth steel wool or wired brushes SLIMLINE SHOWER BASE Rev 3 Ver 4 05 2013 16 ream in style QWALL 4 ACRYLIC SHOWER WALL INSTALLATION INSTRUCTIONS IMPORTANT DreamLine reserves the right to alter modify or redesign products at any time without prior notice For the latest up to date technical drawings manuals or any other details please refer to the support BathAuthority com web page AAN Please read these instructions carefully before installing If you have any questions regarding installation please call our technical support specialists Monday through Friday 9 00 AM 5 00 PM EST at Phone 1 866 731 2244 Fax 1 866 227 1533 or e mail our technical support group at support BathAuthority com For more information on DreamLine Shower Back Wall pl
20. e is contacting the rough floor along the entire length of the shower base Ensure that the base is level in all directions You may need to use shims to hold the tray in the level until the bedding settles and supports the tray Remove all extra mortar See Fig 7 for details Fig 7 Waterproof Drywall Waterproof Drywall 7 Allow the bedding material to completely harden before applying weight to the bottom of the shower base Install the cement board or the wallboard above the tile flanges and secure it to the studs Put the tiles or other finishing material over the cement board leaving 1 8 gap between the bottom of the tile and the Caulk Ceramic Tile splash rim of the shower base Use caulk to fill that gap See Fig 8 and Fig 9 for details SLIMLINE SHOWER BASE Rev 3 Ver 4 05 2013 15 Product maintenance To insure long lasting life for your acrylic back walls wipe them off after each use with a soft cloth To clean the acrylic back walls use non abrasive sprays or cream based cleaners Never use abrasive cleansers metal brushes or scrapers that could scratch or dull the surface To insure long lasting life for your glass shower products wipe them off after each use with a soft cloth Rinse and wipe of the glass using either soft cloth or squeegee to prevent soap buildup Never use abrasive cleaners and cleaning products that contain scoring agent because this may scratch the surfac
21. ease visit www BathAuthority com Ver 1 Rev 1 Preparation 1 After opening all boxes and packages read this introduction carefully Check that all of the needed parts are included in the package by marking all the components on the Detailed Diagram of Shower Door Components Examine boxes and packages for shipping damage If the unit has been damaged has a finishing defect or has missing parts please contact our customer support department within 5 business days of the delivery date Please note that DreamLine will not replace any damaged products missing parts free of charge after 5 business days or if the product has been installed Feel free to contact DreamLine if you have any questions 2 Please note that you should consult your local building codes with questions on installation compliance standards Building and plumbing codes may vary by location and DreamLine is not responsible for code compliance standards for your project 3 This acrylic wall system is specially designed to be installed over any solid surface If you are installing the acrylic walls over the existing tiles remove all loose tiles before the installation If you are installing over the existing painted walls take all loose paint off Please note that some cutting and drilling might be necessary during the installation process 4 Make sure to turn off the water supply remove faucet handles or any fixture trims protruding from the wall Clea
22. el or improper angle of side walls will result in serious problems for your installation Please note that some adjustments and drilling might be necessary during the installation process IMPORTANT NOTE Dimensions provided for reference only You must measure the actual shower tray sizes before installation Allowed tolerance for center of the drain is 1 2 Tools Required Tape Measure Pencil L evel SLIMLINE SHOWER BASE Rev 3 Ver 4 05 2013 2 SINGLE THRESHOLD SHOWER BASE Center Drain Configuration MODEL SPECIFICATION D1 in in DLT 1132320 32x37 DLT 1136360 36 x36 DLT 1136480 36 x48 30760 327x607 Mex i9 3 _ 60 3 i9 30 SLIMLINE SHOWER BASE Rev 3 Ver 4 05 2013 Left Hand Drain Configuration i MODEL SPECIFICATION D1 in WT1 in 30 i19 32 15 DLT 1132601 32 x60 L 82 T 86027 d5 wq 12 DLT 1134601 34 x 60 34 60 DLT 1136601 36 x60 SLIMLINE SHOWER BASE Rev 3 Ver 4 05 2013 Right Hand Drain Configuration WI D1 MODEL SPECIFICATION D1 in W1 in 30 x 60 mo ox ow ode oam omaa 36x59 1 36 6 ix _ SLIMLINE SHOWER BASE Rev 3 Ver 4 05 2013 NEO SHOWER BASE 01722036360 36736 18 5 16 DLT 2088380 38538 38 20516 25 m DLT 2040400 40 22 5 16 14 3 8 DLT 2042420 4254 4X
23. imited warranty from the date of purchase for vanities and sinks with all other terms of this warranty applying except the duration of the warranty DREAMLINE JETTED AND STEAM SHOWER CABINS DREAMLINE SHOWER COLUMNS AND DREAMLINE SHOWER SEATS ARE NOT INTENDED FOR COMMERCIAL USE AND THERE IS NO WARRANTY EXTENDED FOR THESE PRODUCTS FOR COMMERCIAL USE DreamLine hereby disclaims all warranties for products sold as dealer or store displays DreamLine hereby disclaims all warranties for products used outside of the United States or Canada whether expressed or implied including but not limited to the implied warranties of merchantability and fitness for a particular purpose WARRANTY TERMS DreamLine will at its election repair or replace the product found by DreamLine in its sole judgment to be defective within the warranty period under normal residential use and maintenance The replacement of a product is limited to supplying a replacement product or part same as existing or if not available comparable product DreamLine warranty obligation shall be discharged upon tender of parts replacement or repair of the product Purchaser s refusal to accept the tender terminates all warranty obligations and VOIDS THE WARRANTY Cost of freight for returning products to DreamLine for repairs or replacement under this limited warranty are the responsibility of the customer Cost of freight associated with shipping of replacement product or parts to the customer may be
24. n the surface removing soap film and dirt from all wall surfaces using regular household detergent and then wipe it dry Tools Required pu UAM Drill bit T Square Caulk Measure Pencil Knife 8 5 16 4 Dee Gun Electric Hammer Screwdriver Drill Ver 1 Rev 1 2 Detailed Diagram of Acrylic Shower Wall Components 2 Packing List ae 3 Decorative edge molding Countersunk screw ST4 2x30 Shelf bracket 5 08 Decorative cover NOTE Unpack your unit carefully and inspect it Lay it out and identify all parts using the detailed diagram and packing list in your manual as a reference Before discarding the carton check for small hardware bags that tend to fall to the bottom of the box If any parts are damaged or missing please contact DreamLine for replacement NOTE Retain these installation instructions for future reference Ver 1 Rev 1 3 Preparation for Installation of Side Panel If you are installing a shower enclosure with a wall Wall Profile profile you can hide the edge of the Side panel 01 behind the wall profile Wall We See Fig 1 for details A 2 Side Panel Wall Profile Fig 1 1 Place a mark on the walls with a dist
25. nformation provided on DreamLine s websites The warranty does not extend any non DreamLine plumbing or components installed by installers end users or by any party other than DreamLine THE FOREGOING WARRANTIES ARE IN LIEU OF ALL OTHER WARRANTIES EXPRESSED OR IMPLIED INCLUDING BUT NOT LIMITED TO THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE BATH AUTHORITY LLC DREAMLINE AND OR SELLER DISCLAIMS ALL LIABILITY FOR SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGES DREAMLINE IS NOT LIABLE FOR PERSONAL INJURIES OR DEATH TO ANY PERSON OR FOR ANY DIRECT SPECIAL INCIDENTAL OR CONSEQUENTIAL DAMAGE LOSS OF USE LOSS OF TIME LOSS OF PROFITS INCONVENIENCE INCIDENTAL EXPENSES LABOR OR MATERIAL CHARGES OR ANY OTHER COSTS RESULTING FROM THE USE OF ITS PRODUCTS OR PERTAINING TO THE APPLICATION OF THE PRESENT WARRANTY OR RESULTING FROM THE REMOVAL OR REPLACEMENT OF ANY PRODUCT OR ELEMENT OR PART COVERED BY THIS WARRANTY PRODUCT WARRANTY PERIODS DreamLine is not responsible for product code compliance or for verifying building code restrictions on installation or use and any such compliance is excluded from this warranty DreamLine reserves the right to modify this warranty at any time such warranty modifications will not alter the warranty applicable at the time of sale of the products in question The warranty terms for specific products for consumer non industrial non commercial non business use only are SHOWER BAC
26. ses please visit www BathAuthority com
27. test up to date technical drawings manuals or any other details please refer to the support BathAuthority com web page Please read these instructions carefully before installing If you have any questions regarding installation please call our technical support specialists Monday through Friday 9 00 AM 5 00 PM EST at Phone 1 866 731 2244 Fax 1 866 227 1533 or e mail our technical support group at support BathAuthority com For more information on DreamLine Shower Enclosures please visit www BathAuthority com Preparation 1 After opening all boxes and packages read this introduction carefully Check that all of the needed parts are included in the package by marking all the components on the Detailed Diagram of Shower Door Components Examine boxes and packages for shipping damage If the unit has been damaged has a finishing defect or has missing parts please contact our customer support department within 5 business days of the delivery date Please note that DreamLine will not replace any damaged products or missing parts free of charge after 5 business days or if the product has been installed Feel free to contact DreamLine if you have any questions 2 Please note that you should consult your local building codes with questions on installation compliance standards Building and plumbing codes may vary by location
28. thorized dealer Warranty shall be VOID if the shower seat is not professionally installed on a properly reinforced wall VANITIES AND VESSEL SINKS DreamLine warrants bathroom vanities and vessel sinks to be free from defects in workmanship and materials under normal residential use for a period of one 1 year from the initial date of purchase by the owner end user contractor or builder from an authorized dealer STATE LAWS AND THIS WARRANTY Some states provinces do not allow limitations on how long an implied warranty lasts or the exclusion or limitation of special incidental or consequential damages so these limitations and exclusions may not apply to you This warranty gives you specific legal rights You may also have other rights which vary from state province to state province WARRANTY SERVICE The following information will be required for you to file a Warranty claim 1 Your name address and telephone number 2 Product model number 3 Brief description of problem please note that additional information such a photos may be required to fully process your warranty claim 4 Proof of purchase You may submit this information by e mail mail or fax to DreamLine Warranty Service Center 75 Hawk Road Warminster PA 18974 F 1 866 857 3638 T 1 866 731 2244 Warranty bathauthority com dream in style TEL 866 731 2244 FAX 866 227 1533 WWW BATHAUTHORITY COM For more information on DreamLine Shower Ba
Download Pdf Manuals
Related Search