Barclay Products 4110-66-CP Installation Guide
Contents
1. Curved Cat No LA Shower Rod 4110 BARCLAY INSTALLATION INSTRUCTIONS Parts Included e 1 Curved Rod e 2 Rectangular Flanges Mounting Hardware Tools Needed e Small Blade Screwdriver Phillips Screwdriver Level Drill with 1 8 Bit e Pipe Cutter Hacksaw Optional 1 Measure wall opening 2 Place the two ends of the rod together if it came as two pieces 3 Measure rod You can cut ends up to 1 1 2 off each end 3 total to shorten rod You can increase size by sliding flange out up to 1 2 1 total For best results have rods extend into flange up to the end of the guides inside the flange 4 When desired size is achieved slide flanges on each end and install rod in opening Do Not use set screws yet 5 After rod is secured to walls use a level to make sure rod is level side to side and front to back Now install set screws A 1 8 pilot hole is recommended for optimum strength 6 16 08 P 847 244 1234 www barclayproducts com
Download Pdf Manuals
Related Search