eLEDing EE802WDC Instructions / Assembly
Contents
1. JAE SYSTEMS GROUP Inc Thank you for choosing eLEDing It is important that you read this set up instruction before installing Any questions or issues please contact us before returning Our goal is 100 customer satisfaction Please post your positive feedback on the web stores We appreciate your business Thanks again EESGI info eesgi com 1 877 579 3889 USA or 626 579 3889 M F 10 00am to 5 00pm PST EE802WDC Refer Page 2 for detail of Installation INSTANT DISCOUNT COUPON for Purchasing any of these High Performance Solar Lights Efficient amp Reliabbe Efficient amp Reliable gaa ehh J n EE818WDC EE860plus EE814WDC Equivalent to 100W Halogen Lamp or Equivalent to 60W Standard Lamp Equivalent to 60W Halogen Lamp or 200 pieces traditional LED matrix illuminators Upgraded dual operating SMART modes 100 pieces traditional LED matrix illuminators Dusk to Dawn continuous illumination Dusk to Dawn continuous illumination Dusk to Dawn continuous illumination Contact Info 877 579 3889 sales eesgi com www eleding com Rev EE802WDC 070815 Page 1 EJ SYSTEMS GROUP Inc eLEDing EE802WDC Quick Set up Reference First Time Activate Turn on the Light The unit comes with an activation needle to activate the light Insert the needle or small paperclip into the small hole at the top edge of the light body to activate and turn on the light Refer Fig 1 If this process is launched in daylight conditi2. nce holes Insert the plastic anchors and screws Then mount the unit on the mounting screws True Dusk to Dawn Illuminating Profile This unit senses its surrounding ambient light level and it will turn on in darkness providing moonlight soft glow lighting all night long When motion is detected it lights up to its full brightness within the default sensitivity range up to 30 when itis mounted 7 above the ground When motion is no longer sensed the unit will automatically dim down back to moonlight illumination 3 1 8 Fig 1 Fig 2 Notes e Avoid placing objects in front of the motion detector that may affect detecting performance e Avoid installing the unit near air conditioners central heaters or high voltage systems e Avoid placing the motion detector head towards high movement areas e Clean the solar panel with a moist soft cloth at least once a year e Clean accumulated snow as soon as possible during the snowing season e Do not expose the light to fire intense heat or immerse in water e Never look directly into the light or shine it into another person s eyes e f the light doesn t activate when tt Is first turned on then allow 1 2 days for the panel to re charge the battery Contact Info 877 579 3889 sales eesgi com www eleding com Rev EE802WDC 070815 Page 2
3. on the unit will shut off automatically within a few seconds and then will turn on only in darkness When dusk comes the unit will turn on in darkness when it senses a lower ambient light level When dawn comes the unit will automatically turn off when it senses an increasing ambient light level Activating the unit during nighttime or in dark environment is recommended For daytime setup and activation make sure the solar panel surface is totally covered Mounting Choose a flat and stable mounting surface with maximum exposure to direct sunlight It is essential that the panel receives 4 hours of direct sunlight every day in order to ensure dusk to dawn performance For Northern hemisphere installations the light should be mounted with a southerly exposure and visa versa for Southern hemisphere installation East and West mounting locations with good sun exposure can also be good mounting locations There are screw mounting marks on the light body to assist as mounting references Refer Fig 2 Mark the two screw positions using these reference marks Then drill the screws into the pre marked positions and mount the light on the screws This light must be mounted horizontally in a higher position up to 10 to project light toward the desired area e For wood surfaces drill the screws into the pre marked locations and mount the unit e For surfaces of concrete brick or stucco use a masonry bit with appropriate size amp length to drill cleara
Download Pdf Manuals
Related Search