Hampton Bay 1000052871 Instructions / Assembly
Contents
1. 1 855 HD HAMPTON for further assistance Installation o Attaching the mounting bracket to the junction box Remove the pre installed cap nuts from the mounting unit AA and place them in a safe location Attach the mounting unit AA to the junction box not included with the mounting screws BB NOTE The pre installed support screws on the mounting bracket AA should protrude out away from the junction box 2 O o a Making the electrical connections Connect the copper wire from the light fixture A to the mounting unit AA by securing it with the preinstalled ground screw DD Connect the black wire to the black power wire coming out of the junction box the white wire neutral to white wire coming out of the junction box and copper green wire to the ground wire with wire nuts CC and secure with electrical tape not included NOTE If the wires from the fixture are the same color attach the side with markings or letters to the black positive wire and the other to the white neutral wire Installing the light fixture Secure the light fixture A to the junction box by placing the holes in the light fixture A over the preinstalled support screws Secure with the cap nuts as shown Secure the canopy B with the finial C Installing the light bulbs Install three GOW E12 base candelabra bulbs not included Only use bulbs of the specified type and maximum rated2. have resulted during shipping If there is a defect in the wire do not attempt installation Please call our Customer Service Team at 1 855 HD HAMPTON WARNING Before starting installation of this fixture or A N removal of a previous fixture disconnect the power by turning off the circuit breaker or by removing the fuse at the fuse box Warranty The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of five 5 years from date of purchase This warranty applies only to the original consumer purchaser and only to products used in normal use and service If this product is found to be defective the manufacturer s only obligation and your exclusive remedy is the repair or replacement of the product at the manufacturer s discretion provided that the product has not been damaged through misuse abuse accident modifica tions alterations neglect or mishandling This warranty shall not apply to any product that is found to have been improperly installed set up or used in any way not in accordance with the instructions supplied with the product This warranty shall not apply to a failure of the product as a result of an accident misuse abuse negligence alteration faulty installation or any other failure not relating to faulty material or workmanship This warranty shall not apply to the finish on any portion of the product such as surface and or weathering as this i
3. Item 1000052871 Model 82374BN USE AND CARE GUIDE FLUSHMOUNT Questions problems missing parts Before returning to the store call Hampton Bay Customer Service 8 a m 6 p m EST Monday Friday 1 855 HD HAMPTON HAMPTONBAY COM THANK YOU We appreciate the trust and confidence you have placed in Hampton Bay through the purchase of this wall lantern We strive to continually create quality products designed to enhance your home Visit us online to see our full line of products available for your home improvement needs Thank you for choosing Hampton Bay Table of Contents Table of Contents cccccccccccsssssescceseeesnsssssseeeeeseeeeneees 2 Package Content wiciciiisie ciiinseisnitisnienavinivientinnivenivenirines 3 Safety Information 2 Installation ssiccassncsccsesaseeesnsesnscsecsnscenssesweceatnorsnanenetdnonstin 5 Warranty ieciciccccctccecececececseececceceeccceseee ete ceeestecdesesecenedeseieds 2 Operation ee ata anenEP a NT OE Red OO PE ROO 6 Pre Installation soseeceaseeenaeesneeeaseceaaessueneaneeennersnieneanseraaas 2 Care and Cleaning cscescsesescssesssscsssssssssssssesssssseessess 6 Planning Installation ssesssssseseeeersneeenesesenensenseaes 2 Troubleshooting csssscsesssessessssssrssessstsersessseesareeneees 6 Safety Information O Consult a qualified electrician if you have any electrical CAUTION Inspect the wire insulation for any cuts questions abrasions or exposed copper that may
4. s considered normal wear and tear The manufacturer does not warrant and specially disclaims any warranty whether express or implied of fitness for a particular purpose other than the warranty contained herein The manufacturer specifically disclaims any liability and shall not be liable for any consequential or incidental loss or damage including but not limited to any labor expense costs involved in the replacement or repair of said product Contact the Customer Service Team at 1 855 HD HAMPTON or visit www hamptonbay com Pre Installation PLANNING INSTALLATION O Read all instructions before installation O To avoid damaging this product assemble it on a soft non abrasive surface such as carpet or cardboard C Keep your receipt and these instructions for proof of purchase Pre Installation continued TOOLS REQUIRED Phillips screwdriver Wire strippers Flat blade screwdriver Pliers Safety Electrical glasses tape HARDWARE INCLUDED A NOTE Hardware not shown to actual size AA BB CG D DD Part Description Quantity AA Mounting bracket 1 BB Mounting screw 2 cC Wire nut 3 DD Ground screw 1 HAMPTONBAY COM 3 Please contact 1 855 HD HAMPTON for further assistance Pre Installation continued PACKAGE CONTENTS Part Description Quantity A Light fixture 1 B Canopy 1 C Ornament 1 4 HAMPTONBAY COM Please contact
5. wattage or less Adjusting the crystals Adjust the draping of the crystals by turning the prein stalled adjustment nut Operation 1 Turning the light on O Turn the light switch on to activate the fixture Care and Cleaning Ol Clean the lamp with a soft dry cloth O Do not use any cleaners with chemicals solvents or harsh abrasives Troubleshooting Problem Possible Cause Solution The bulb will not light The bulb is burned out Replace the light bulb The power is off Ensure the power supply is On There is a faulty wire connection Check the wiring The circuit breaker is off Ensure the circuit breaker is in the On position The fuse blows or circuit breaker trips when the light is turned on There are crossed wires or the power wire is grounding out Check the wire connections Contact a qualified electrician or call the Customer Service Team at 1 855 HD HAMPTON HAMPTONBAY COM 6 Please contact 1 855 HD HAMPTON for further assistance Questions problems missing parts Before returning to the store call Hampton Bay Customer Service 8 a m 6 p m EST Monday Friday 1 855 HD HAMPTON HAMPTONBAY COM Retain this manual for future use
Download Pdf Manuals
Related Search