Design House 520379 Instructions / Assembly
Contents
1. Fixture to the white supply wire C Attach the fixture ground wire to the CROSS BAR with the green GROUND SCREW Then connect it to the supply ground wire with a WIRE NUT Carefully tuck wires back into the JUNCTION BOX 4 Attach the CEILING PLATE to the CROSS BAR through SCREW HOLES as shown and secure it with BALL NUTS 5 Attach the SHADES to the LAMP HOLDERS and secure it with SOCKET RINGS 6 Install BULBS not included See relamping label at socket area or packaging for maximum allowed wattage Turn on the power at fuse or circuit breaker ASSEMBLY AND INSTALLATION CONT CEILING PLATE sany GROUND SCREW SCREW HOLES BALL NUTS c FIXTURE SCREWS j gt 1 WIRE NUTS eo gt T e gt 1 SOCKET RING ia not included 520379 520387 IF INDOUBT ABOUT ELECTRICAL INSTALLATION CONSULT A LICENSED ELECTRICIAN Customer Service 1 800 558 87002. far KIMBALL 3LT ISLAND LIGHT DESIGNHOUSE ASSEMBLY INSTALLATION INSTRUCTIONS Item 520379 KIMBALL 3LT ISLAND LIGHT GAL Item 520387 KIMBALL 3LT ISLAND LIGHT BRZ Please read carefully and save these instructions as you may need them at a later date CAUTION WARNING Risk of Fire Min 75 C supply conductors Consult a qualified electrician to ensure correct installation Turn off the main power at the circuit breaker before installing the fixture in order to prevent possible shock GENERAL All electrical connections must be in accordance with local and National Electrical Code N E C standards If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions TOOLS REQUIRED Phillips screwdriver ASSEMBLY AND INSTALLATION Turn off the power at fuse or circuit breaker 1 Gently take all parts out of the package lay them on a smooth surface unscrew the BALL NUTS and the FIXTURE SCREWS Attach the CROSS BAR to the JUNCTION BOX using 2 MOUNTING SCREWS 2 Install STEMS to the FIXTURE based on the desired length of the item adding CEILING PLATE once finished 3 Make wire connections with WIRE NUTS A Connect the black wire from Fixture to the black supply wire B Connect the white wire from
Download Pdf Manuals
Related Search