Laura Ashley PSY067 Installation Guide
Contents
1. Assembly Instructions Selby Collection Pendant PSY067 WARNING BE SURE TO SHUT OFF POWER AT THE MAIN FUSE OR CIRCUIT BREAKER BOX BEFORE INSTALLING OR SERVICING THIS FIXTURE NOTE 1 Before installing consult local electrical codes for wiring and grounding requirements 2 READ AND SAVE THESE INSTRUCTIONS Contents of Spare Parts Outlet Box House Grounding Wire gt wire Nut Screw Assembly Kit 1 SET 4297MM Mounting Strap Lock Nut Mounting Screw 1 Thread two screws through the mounting strap then secure I ht them with two lock nuts Adjust the length of the screws if gt Ball Nut necessary Cap Nut 2 Attach the mounting strap to the outlet box by using two a Gord mounting screws 3 Measure the desired length of the cord A from the canopy to the top end of the cap nut Leave additional 8 cord B above the canopy then cut off the unnecessary cord See Fig 2 4 Mark the 3 cord C from the top of the cord Use a knife to peel off the insulation of the cord C carefully to show three inside wires out See Fig 2 Caution Cutting too deep may cut off three inside wires and destroy the insulation surface of the three inside wires 5 Peel off the three wires from the top at about 5 8 length D to expose the copper for wiring See Fig 2 Pull the cord down slightly until the stra2. in relief touches the inside of the canopy Then secure the plastic screw See Fig 1 Pull out the outlet wires and the house grounding wire from the outlet box Make wire connections using the wire nuts a The clear wire marked L from the fixture to the black wire from the power source O N b The clear wire with white line and marked N from the L Shade fixture to the white wire from the power source Bulb Type B Max 60W c The clear grounding wire with green line and marked not included from the fixture to the green grounding wire from power source Carefully put wires back into the outlet box 8 Attach the canopy to the mounting D 5 8 strap by inserting the screws then secure it with the ball nuts B 8 9 Install a bulb not included Note relamping label at socket or packaging area for maximum allowed wattage 10 Turn on the power at the main fuse or circuit breaker box
Download Pdf Manuals
Related Search