Home
        Home Decorators Collection 25395-20 Installation Guide
         Contents
1.  a soft dry cloth     2  Do not use any cleaners with chemicals  solvents or harsh abrasives     LIMITED WARRANTY    The manufacturer warrants this pendant fixture to be free from defects in materials and workmanship for a  period of one  1  year from date of purchase  This warranty applies only to the original consumer purchaser and  only to products used in normal use and service  If this product is found to be defective  the manufacturer   s only  obligation  and your exclusive remedy  is the repair or replacement of the product at the manufacturer   s discretion   provided that the product has not been damaged through misuse  abuse  accident  modifications  alterations  neglect  or mishandling  This warranty shall not apply to any product that is found to have been improperly installed  setup   or used in any way not in accordance with the instruction supplied with the product  This warranty shall not apply  to a failure of the product as a result of an accident  misuse  abuse  negligence  alteration  or faulty installation  or  any other failure not relating to faulty material or workmanship  This warranty shall not apply to the finish on any  portion of the product  such as surface and or weathering  as this is considered normal wear and tear  The  manufacturer does not warrant and specially disclaims any warranty  whether express or implied  of fitness  for a particular purpose  other than the warranty contained herein  The manufacturer specifically disclaims  any liab
2.  sufrido da  os durante el env  o   Importante  Revisa que el aislamiento de los cables no haya sufrido ning  n corte  abrasi  n ni  filamentos de cobre expuestos durante el env  o  Si hay un defecto en el cable SUSPENDE el  ensamblaje  Llama a nuestro equipo de Servicio al Cliente al 1 877 385 2907     2  SI TIENES ALGUNA PREGUNTA SOBRE ELECTRICIDAD  CONSULTA A UN  ELECTRICISTA CALIFICADO     3  Conserva el recibo y estas instrucciones como Comprobante de Compra     HERRAMIENTAS NECESARIAS PARA EL ENSAMBLAJE     Destornillador Phillips Destornillador de cabeza plana   no incluidos   no incluidos     VA     Bombilla  no incluida    No mayor de 100 vatios de base mediana Tipo A o equivalente CFL        PIEZAS INCLUIDAS PARA EL ENSAMBLAJE  no se muestran a escala                                 E  MN 2 i   1  Soporte de  2  Tornillos de la  3  Tuercas para  2  Tornillo  1  Tornillo  Montaje  A  Caja El  ctrica  B  Cable  C  Maquinado de 3 8 Verde  E   plg  10 mm   D   oe                   1  Cubierta  F    Portalampara    INSTRUCCIONES DE ENSAMBLAJE    1  APAGA LA ELECTRICIDAD en la caja de fusibles  antes de comenzar la instalaci  n desconectando el cort   acircuitos o sacando el fusible  CONDUCTORES DE  CORRIENTE  M  NIMO 90   C  CONSULTA A UN  ELECTRICISTA CALIFICADO PARA GARANTI   ZAR UNA CONEXI  N CORRECTA DEL CONDUC   TOR DEL CIRCUITO DERIVADO     2  Para ajustar el largo del cord  n  afloje el tornillo en el  aseguraror del cord  n deslizando el cord  n a trav  s del  mi
3. HAVE ANY ELECTRICAL  QUESTIONS     3  Keep your receipt and these Instructions for Proof of Purchase     TOOLS REQUIRED FOR ASSEMBLY     Phillips screwdriver Flathead screwdriver   not included   not included     vg    Light Bulb  not included    100   watt maximum Type A medium base bulb or CFL equivalent        PARTS INCLUDED FOR ASSEMBLY  parts are not to scale                        1 ea     Mounting 2 ea     Outlet 3 ea Wire Nut  C  2 ea     3 8 in  1 ea     Green  Strap  A  Box Screw  B  Machine Screw Screw  E    10 mm   D   E   mmy             1 ea     Canopy  F    Lamp Holder    ASSEMBLY INSTRUCTIONS   1  TURN OFF ELECTRICITY at main fuse box  or  circuit breaker box  before beginning installation by  switching circuit breaker off or removing fuse  MIN  90   C SUPPLY CONDUCTORS  CONSULT A  QUALIFIED ELECTRICIAN TO ENSURE COR   RECT BRANCH CIRCUIT CONDUCTOR     2  To adjust length of cord  loosen screw on cord fas   tener slipping cord through it to shorten or lengthen  cord to desired length  Fasten mounting strap  A  onto  the outlet box using two outlet box screws  B   Ensure  that all supply circuit wires protrude out of the outlet  box  Strip   in  of insulation from wire ends of fixture  and of supply circuit wires  Attach ground supply  circuit wire and ground fixture wires together with  wire nut  C   Never connect ground wire to black or  white power supply wires  Twist stripped wire ends of  fixture and supply circuit wires together black to  black  hot  and 
4. HOME    DECORATORS  COLLECTION    Industrial Metal Pendant  Home Depot SKU 522 869  UPC 092903292446    White Gloss Finish                                                                         INSTRUCTION MANUAL    Thank you for purchasing this Home Decorators Collection interior pendant fixture  This  product has been manufactured to the highest standards of safety and quality  The durable  finish provide for care  free maintenance  Simply wipe with a clean towel to keep looking  new     FEATURES   1  Durable easy to maintain finish  simply wipe with a clean soft cloth to keep looking new     2  Type A medium base bulb lamp holder may be fitted with a CFL equivalent energy   saving bulb  bulbs not included      3  6 Ft  cord included     QUESTIONS  PROBLEMS  MISSING PARTS     Before returning to your Home Depot  please call our Customer Service Team at 1 877 385 2907  or visit www homedepot com  Please reference your SKU 522 869 when speaking to a Customer  Service agent     ASSEMBLY INSTRUCTIONS  CAUTION     1  Before starting to assemble your pendant fixture  spread all parts out on a clean flat   surface  Inspect each part for defects that may have occurred during shipping    Important  Inspect the wire insulation for any cuts  abrasions or exposed copper that may have  resulted during shipping  If there is a defect in the wire  DO NOT continue the assembly  operation  Please call our Customer Service Team at 1 877 385 2907     2  CONSULT A QUALIFIED ELECTRICIAN IF YOU 
5. erra      A    B    Cables a Negro  positivo  tierra de la       c    l  mpara l     ae    Blanco  neutral       Asegurador  de cord  n                                  Portal  mpara                SOLUCION DE PROBLEMAS     Causa Posible Solucion    La bombilla no 1  Reemplaza la bombilla   enciende  fundida   2  No hay electricidad   2  Aseg  rate de que la  ee   corriente est   encendida        3  El cable no esta 3  Aseg  rate de que el  enchufado  cable est   conectado al  tomacorriente   4  El cortacircuitos est     4  Aseg  rate de que el  apagado  cortacircuitos est   en la  posici  n de    on      encendido    El fusible se funde o el  1  Un cable expuesto 1  No uses la l  mpara   cortacircuitos salta Descon  ctala de la pared y  cuando se enciende la contacta a un electricista  luz calificado o llama al equipo    de Servicio al Cliente de  The Home Depot al 1 877   385 2907     MANTENIMIENTO DEL PRODUCTO   1  Para limpiarla simplemente usa un pa  o suave y seco     2  No uses limpiadores con qu  micos  solventes o productos abrasivos     GARANT  A LIMITADA    El fabricante garantiza que esta l  mpara no presentar   defectos materiales o de fabricaci  n por un per  odo de  1   a  o a partir de la fecha de compra  Esta garant  a es v  lida s  lo para el comprador original y cubre solamente los  productos en uso y funciones normales  Si se descubre alg  n defecto en este producto  la   nica obligaci  n del  fabricante  y el exclusivo remedio del comprador  es la reparac
6. i  n o el reemplazo del producto a discreci  n del  fabricante  siempre y cuando el producto no se haya da  ado por mal uso  abuso  accidente  modificaciones   alteraciones  negligencia o manejo indebido  Esta garant  a no cubre ning  n producto que se instale  configure o  use incorrectamente sin seguir las instrucciones adjuntas al producto  Esta garant  a no cubre fallas del producto a  consecuencia de un accidente  mal uso  abuso  negligencia  modificaciones o instalaciones defectuosas  o cualquier  otra falla no relacionada con defectos materiales o de fabricaci  n  Esta garant  a no se aplica al acabado de ninguna  parte del producto  como el de la superficie  y al deterioro por condiciones ambientales  ya que eso se considera un  desgaste normal  El fabricante no garantiza y rechaza especialmente toda garant  a  ya sea expresa o  impl  cita  de idoneidad para un prop  sito en particular distinto de la garant  a aqu   indicada  El fabricante  se exime espec  ficamente de cualquier obligaci  n y no es responsable por da  os o p  rdidas directas o  indirectas  lo que incluye cualquier costo de mano de obra o gastos relacionados con el reemplazo o  reparaci  n de dicho producto     
7. ility and shall not be liable for any consequential or incidental loss or damage  including but not  limited to any labor   expense costs involved in the replacement or repair of said product     HOME    DECORATORS  COLLECTION    Lampara Colgante de Metal Industrial  Home Depot SKU 522 869  UPC 092903292446    Acabado en blanco brillante                                                                    MANUAL DE INSTRUCCIONES    Gracias por comprar esta l  mpara colgante de la colecci  n Home Decorators  Este producto se  ha fabricado con las normas de seguridad y calidad m  s elevadas  El acabado duradero apenas  necesita mantenimiento  Simplemente p  sale una toalla limpia para que se siga viendo como  nueva     CARACTER  STICAS     1  Acabado duradero y f  cil de mantener  simplemente p  sale un pa  o limpio para que se  siga viendo como nueva     2  Portal  mpara mediano Tipo A acepta bombillas CFL equivalentes que ahorran electric  idad  no incluida      3  Cable de 182 88 cm incluido   PREGUNTAS  PROBLEMAS O PIEZAS FALTANTES   Antes de devolver el producto a The Home Depot  llama por favor a nuestro Equipo de Servi     cio al Cliente al 1 877 385 2907 o visita www homedepot com  Usa como referencia el SKU  522 869 cuando hables con un agente de Servicio al Cliente     INSTRUCCIONES DE ENSAMBLAJE    PRECAUCI  N     1  Antes de empezar a ensamblar tu l  mpara colgante  ordena todas las piezas sobre una super   ficie plana y limpia  Verifica que ninguna de las partes haya
8. smo para acortar o alargar el cord  n como se desee   Ajusta el soporte de montaje  A  en la caja el  ctrica  usando los dos tornillos incluidos  B   Aseg  rate de que  todos los cables de entrada del circuito sobresalgan de la  caja el  ctrica  Pela 1 9 cm de aislamiento de los extremos  de los cables de la l  mpara y del circuito de entrada  Une  el cable a tierra del circuito y de la l  mpara con una tuerca  para cables  C   Nunca conectes el cable a tierra a los    cables de entrada de corriente negro o blanco  Enrosca los       extremos de los cables pelados de la l  mpara y de la  entrada de corriente del circuito negro con negro   positivo  y blanco con blanco  neutral  Enrosca las tuer   cas para cables  C   Une con cinta adhesiva los cables y  las tuercas  Coloca con cuidado los cables conectados  dentro de la caja el  ctrica   Si no hay cable de tierra en el  circuito  fija entonces el cable a tierra de la l  mpara al  soporte de montaje  A  con el tornillo verde  E       3  Coloca la cubierta  F  en el soporte de montaje  A    alineando los dos orificios laterales de la cubierta con los  dos orificios laterales del soporte de montaje  A   F  jalo  todo atornillando los dos tornillos maquinados de 10 mm   D  en el soporte de montaje  A  pas  ndolos a trav  s de  los orificios de la cubierta     4  Instala la bombilla  no incluida   Usa solamente bom     billas del tipo especificado y del vataje indicado o menor                 J  I  ____ Cable de suministro  A   ati
9. white to white  neutral   Twist on wire  nuts  C   Tape wire nuts and wires together  Carefully  tuck connected wires and wire nuts into outlet box    Alternatively  if there is no ground supply circuit  wire  only attach the ground fixture wires to the  mounting strap  A  with the green screw  E       3  Place the canopy  F  onto the mounting strap  A    aligning the two canopy side holes with the two side   holes in the mounting strap  A   Secure into place by  screwing two 3 8 in  machine screws  D  through the  two canopy side holes and into the two side holes in   the mounting strap  A      4  Install light bulb  not included   Only use bulb of  the specified type and maximum rated wattage or less                        Ground supply wire    Ld  l   B  Ground    Ai E Black  hot     wires        Y    0              A          Cord fastener                               Lamp holder                TROUBLESHOOTING     Possible Cause Corrective Action  Bulb will not light  1  Bulb is burned out  1  Replace light bulb     2  Make sure power  supply is on    3  Make sure cord is   plugged into the outlet        4  Circuit breaker off  4  Make sure circuit  breaker is to the    on     position    Fuse blows or circuit   1  Exposed wire 1  Discontinue use   breaker trips when Unplug unit from the wall  light is turned on  and contact a qualified    electrician or call the  Home Depot Customer  Service Team at 1 877   385 2907     PRODUCT MAINTENANCE   1  To clean simply wipe with
    
Download Pdf Manuals
 
 
    
Related Search
    
Related Contents
取扱説明書  Uvozone 450/750 Manuel d`utilisation  STEVAL-PCC009V1, universal USB to serial    LISTE DES DOCUMENTS LIVRES TYPE REF DATE CREATION  FNS-5000B 2-Bay SATA HDD w/ Gigabit Ethernet Port  Hitachi CP-WX8255A data projector  NGS PowerPump4000  ハードディスクキャビネットETERNUS JX40 [PG      Copyright © All rights reserved. 
   Failed to retrieve file