Kenroy Home 92058HNBR Use and Care Manual
Contents
1. 7 INSTALL 60 MAX MEDIUM BASE TYPE A BULB INCLUDED INTO SOCKET 8 RESTORE POWER YOUR NEW FIXTURE IS NOW READY FOR USE U 11 2013 92058HNBR 5 52. DRIVER PLIERS ADJUSTABLE WRENCH UNPACK THE YOU SHOULD HAVE RECEIVED THE FOLLOWING PARTS IN THE PACKAGE FIXTURE ASSEMBLY HARDWARE 2 8 32 1 1 4 SCREWS 3 WIRE CONNECTORS PROTECT THE FINISH PLACE ALL PARTS ON SOFT SURFACE INSTALL THE FIXTURE 1 REMOVE THE SHADE FROM BACKPLATE ASSEMBLY BY UNSCREWING 2 SMALL 5 5 2 REMOVE THE MOUNTING PLATE FROM BACKPLATE ASSEMBLY BY UNSCREWING 2 FINIALS 3 ATTACH THE MOUNTING PLATE TO OUTLET BOX USING TWO SCREWS PROVIDED WITH THE OUTLET BOX NOTE IF THE SCREWS WITH THE OUTLET BOX ARE TOO SHORT USE THE 2 8 52 1 1 4 SCREWS PROVIDED IN THE MOUNTING HARDWARE PACKAGE 4 CONNECT THE WHITE FIXTURE WIRE TO THE WHITE SUPPLY WIRE IN THE OUTLET BOX USING THE TWIST ON WIRE CONNECTORS PROVIDED CONNECT THE BLACK FIXTURE WIRE TO THE BLACK SUPPLY WIRE IN THE SAME MANNER INSTALL THE GREEN GROUND WIRE UNDER THE GREEN GROUND SCREW ON THE MOUNTING PLATE THEN CONNECT THE GREEN GROUND WIRE TO THE SUPPLY GROUND WIRE IN THE OUTLET BOX USING THE TWIST ON WIRE CONNECTOR PROVIDED S RAISE BACKPLATE ASSEMBLY TO THE WALL AND CAREFULLY TUCK THE WIRES INSIDE THE OUTLET BOX SPREAD THE ELECTRICAL SPLICES SO THAT THE BLACK WIRES ARE ON ONE SIDE OF THE OUTLET BOX AND THE WHITE WIRES ARE ON THE OTHER SIDE LINE UP SCREWS WITH HOLES IN BACKPLATE AND SECURE WITH 2 FINIALS 6 ATTACH THE SHADE TO THE BACKPLATE ASSEMBLY AND SECURE WITH 2 SMALL SCREWS REMOVED ABOVE
3. MODEL 92058HNBR PACKING DIAGRAM STYROFOAM 12 BODY 2 5 5 5 5 5 12 5 WIRE CONNECTOR 3 PCS 8 32 SCREWS SUPPLIED WITH BOX OUNTING PLATE 2 NUTS 2 SCREWS SUPPLY WIRE WHITE SUPPLY WIRE SUPPLY GROUND WIRE OUTLET BOX GROUND GREEN FIXTURE IEE WIRE WALL GROUND SCREW INSTALL THE FIXTURE READ AND SAVE THESE INSTRUCTIONS READ INSTRUCTIONS ALL THE WAY THROUGH TO ASSEMBLY THIS FIXTURE SHOULD TAKE APPROXIMATELY 5 MINUTES TO ASSEMBLE MAKE SURE ALL PARTS ARE FIRMLY TIGHTENED CAUTION TO AVOID POSSIBLE ELECTRIC SHOCK MAKE SURE THE ELECTRICITY IS SHUT OFF AT THE MAIN PANEL YOU REPLACING FIXTURE FIRSTLY TURN THE FIXTURE OFF NEXT THE WALL SWITCH OFF FINALLY GO TO THE MAIN FUSE OR BREAKER BOX IN YOUR HOME TURN THE FUSE OR BREAKER TO THE OFF POSITION SOME TYPES OF FUSES MUST BE UNSCREWED TO SHUT OFF THE POWER ALL WIRING MUST BE DONE IN ACCORDANCE WITH NATIONAL AND LOCAL ELECTRIC CODES F YOU DO NOT HAVE ELECTRICAL WIRING EXPERIENCE HAVE YOUR FIXTURE INSTALLED BY A QUALIFIED LICENSED ELECTRICIAN THIS FIXTURE IS TO BE MOUNTED TO A UL LISTED OUTLET BOX CAPABLE OF SUPPORTING THE WEIGHT OF THIS FIXTURE THE OUTLET BOX MUST BE DIRECTLY SUPPORTED BY THE BUILDING STRUCTURE TOOLS YOU WILL NEED THE FOLLOWING TOOLS OR EQUIPMENT SCREW
Download Pdf Manuals
Related Search