Design House 519702 Instructions / Assembly
Contents
1. REW Then connect it to the supply ground wire with a WIRE NUT Carefully tuck wires back into the JUNCTION BOX 3 Attach the FIXTURE to the CROSS BAR through SCREW HOLES as shown and secure it with BALL NUTS 4 Attach the IRON RACK to the LAMP HOLDER and secure it with SOCKET RING 5 Install BULB not included See relamping label at socket area or packaging for maximum allowed wattage 6 Attach the IRON RACK 01 to the IRON RACK as shown and secure it with DECORATIVE NUTS Turn on the power at fuse or circuit breaker ASSEMBLY AND INSTALLATION CONT GROUND SCREW JUNCTION BOX SCREW CROSS BAR FIXTURE SCREWS C JUNCTION BOX SCREW HOLES IRON RACK q L SOCKET RING BULB not included _ IRON RACK 01 DECORATIVE NUTS Ge IT 519702 519710 IF IN DOUBT ABOUT ELECTRICAL INSTALLATION CONSULT A LICENSED ELECTRICIAN Customer Service 1 800 558 87002. an AJAX 1LT WALL MOUNT al DESIGNHOUSE ASSEMBLY INSTALLATION INSTRUCTIONS Item 519702 AJAX 1LT WALL MOUNT GAL Item 519710 AJAX 1LT WALL MOUNT BRZ Please read carefully and save these instructions as you may need them al a later date CAUTION WARNING Risk of Fire Min 75 C supply conductors Consult a qualified electrician to ensure correct installation Turn off the main power at the circuit breaker before installing the fixture in order to prevent possible shock GENERAL All electrical connections must be in accordance with local and National Electrical Code N E C standards If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions TOOLS REQUIRED Phillips screwdriver ASSEMBLY AND INSTALLATION Turn off the power at fuse or circuit breaker 1 Gently take all parts out of the package lay them on a smooth surface unscrew the BALL NUTS and the FIXTURE SCREWS Attach the CROSS BAR to the JUNCTION BOX using 2 JUNCTION BOX SCREWS 2 Make wire connections with WIRE NUTS A Connect the black wire from Fixture to the black supply wire B Connect the white wire from Fixture to the white supply wire C Attach the fixture ground wire to the CROSS BAR with the green GROUND SC
Download Pdf Manuals
Related Search