Hampton Bay 51332 FAQ
Contents
1. Frequently Asked Questions Can I use this fan outdoors What length downrod can use with this fan Is this fan compatible with a universal remote control Is the light dimmable Can change my CFL or incandescent light bulbs to LED light bulbs Can use a dimmer switch to control my fan changed the light bulbs in my ceiling fan light kit and now none of the lights work Can this fan be mounted on a vaulted sloped or angled ceiling What are the blades made of Why is my fan not blowing air No this fan was designed for indoor use only No the Hayward hugger fan is not intended to be used with a downrod No hugger fans do not have room in the housing for the receiver The light kit for this fan is not dimmable with the CFL bulbs If you use incandescent bulbs and have a separate power switch and wires for your light kit you can install a dimmer on the light only Yes you can use LED bulbs NO you should NEVER use a dimmer switch to control a ceiling fan It will cause premature wear on the capacitors and the motor It will also cause the fan to make noise as the motor was intended to have a 120v AC power source at all times Ceiling fans are required by law to have a light limiter built in prevent over lamping 180 watt maximum combined power draw Refer to your ceiling fan owners manual for details about2. the maximum wattage bulb that you can put in your fan and not over lamp No hugger fans can only be mounted directly to the ceiling The blades of the the Hayward ceiling fan are fiber board and are intended for indoor use Turn off the fan allow it to stop moving then adjust the slide switch to the left and turn the fan back on The blades should be moving in a clockwise direction and the blades on the right side of the fan should be traveling towards you Do not stand directly under the fan and try to feel for air movement Take a step so you are outside the radius of the fan
Download Pdf Manuals
Related Search