Kenroy Home 20989VB Installation Guide
Contents
1. LL A 60 WATT MAXIMUM MEDIUM BASE TYPE A BULB NOT INCLUDED INTO LOWER SOCKET 8 INSTALL A 150 WATT MAXIMUM MEDIUM BASE TYPE A BULB NOT INCLUDED INTO UPPER SOCKET 9 PLUG THE POWER CORD INTO AN OUTLET AND TURN ON AT SWITCH BULB REPLACEMENT 1 BEFORE REPLACING THE BULB BE SURE THAT THE SHADE AND BULB ARE COOL AND LAMP IS UNPLUGGED 2 UNSCREW EXISTING BULB FROM SOCKET AND REPLACE WITH A NEW BULB PLUG POWER SUPPLY CORD BACK INTO OUTLET TROUBLE SHOOTING 1 IF YOUR LAMP DOES NOT LIGHT CHECK PLUG AT THE OUTLET MAKE SURE THE PLUG IS FULLY AND PROPERLY INSERTED INTO THE POWER OUTLET 2 IF LAMP STILL DOES NOT LIGHT UNPLUG FROM OUTLET CHECK THE BULB FOR A BROKEN FILAMENT REPLACE BULB IF NECESSARY PLUG IN LAMP AND TURN IT ON 3 IF THE LAMP STILL DOES NOT LIGHT PLEASE CONTACT YOUR DISTRIBUTOR OR PLACE OF PURCHASE IMPORTANT SAFETY INSTRUCTIONS THIS PORTABLE LAMP HAS A POLARIZED PLUG ONE BLADE IS WIDER THAN THE OTHER AS A FEATURE TO REDUCE THE RISK OF ELECTRIC SHOCK THIS PLUG WILL FIT IN A POLARIZED OUTLET ONLY ONE WAY IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET REVERSE THE PLUG IF IT STILL DOES NOT FIT CONTACT A QUALIFIED ELECTRICIAN NEVER USE WITH AN EXTENSION CORD UNLESS PLUG CAN BE FULLY INSERTED DO NOT ALTER THE PLUG 12 09 20989VB INSTRUCTIONS2. MODEL 20989 PACKING DIAGRAM CA TITLE 20 UPPER POLE ASSEMBLY MIDDLE POLE LOWER POLE METAL RING AND 2 SOCKET RINCS SMALL GLASS SHADE STYROFOAM 12 KGS ARGE GLASS SHADE STYROFOAM 12 KGS emm OCKET RING s WWVYETAL RING LARGE GLASS SHADE 20989GSLG REPLACEMENT PART PPER SOCGKET SWITCH PPER POLE wr sasaw RING SMALL GLASS SHADE 20989GSSM REPLACEMENT PART IDDLE POLE AVAILABLE PARTS ARE 20989GSLG LARGE GLASS SHADE 20989GSSM SMALL GLASS SHADE ASSEMBLY INSTIRUCIIONS READ AND SAVE THESE INSTRUCTIONS READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR TO ASSEMBLY THIS LAMP SHOULD TAKE APPROXIMATELY 15 MINUTES TO ASSEMBLE MAKE SURE ALL PARTS ARE FIRMLY TIGHTENED UNPACK THE LAMP YOU SHOULD HAVE RECEIVED THE FOLLOWING PARTS IN THE PACKAGE 2 SOCKET RINGS METAL RING LARGE GLASS SHADE SMALL GLASS SHADE UPPER POLE ASSEMBLY MIDDLE POLE LOWER POLE AND BASE TO PROTECT THE FINISH PLACE ALL PARTS ON A SOFT SURFACE ASSEMBLE THE LAMP 1 CAREFULLY ORGANIZE AND PLACE ALL PARTS ON A SMOOTH FLAT SURFACE LINE UP ALL OF THE PARTS ACCORDING TO THE ASSEMBLY DIAGRAVM 2 SCREW LOWER POLE TO TOP OF BASE 3 SCREW MIDDLE POLE TO TOP OF LOWER POLE 4 SCREW UPPER POLE TO TOP OF MIDDLE POLE S PLACE SMALL GLASS SHADE OVER LOWER SOCKET AND SECURE WITH A SOCKET RING 6 PLACE LARGE GLASS SHADE OVER UPPER SOCKET THEN SECURE WITH A METAL RING AND A SOCKET RING 7 INSTA
Download Pdf Manuals
Related Search