Global Direct 21146 Installation Guide
Contents
1. ASSEMBLY AND INSTALLATION INSTRUCTIONS W ARNIN G TO AVOID RISK OF ELECTRICAL SHOCK BE SURE TO SHUT OFF POWER BEFORE INSTALLING OR SERVICING THIS FIXTURE Installation Steps 1 Carefully unpack your new fixture and lay out all the TEN parts on a clear surface 4 WHITE SUPPLY WIRE te PS BLACK SUPPLY WIRE K lt WIRE CONNECT 2 Thread Hex nut 2 onto the Nipple 1 place the Washer over SUPPLY GROUND WIRE the end of Nipple 1 thread Nipple 1 through Mounting bar HTE FIXTURE WIRE HEX NUT 1 BLACK FIXTURE WIRE and secure with Hex nut 1 continuously until tight GREEN GROUND SCREW 3 Thread the Ground screw into the hole near the two dimples UT T 80x a of the Mounting bar Secure the Mounting bar to the outlet box CANOPY ea with the Outlet box screws COLLAR RING TT 4 Thread the Loop onto the Nipple 2 KEY LINK 1 5 Weave the Fixture Wire and the Ground Wire through A the Chain links Open Key link 2 connect Loop to one end link CHAIN L of the Chain and close the Key link 2 KEY LINK 2 6 Thread the Fixture Wire and ground wire through the Collar ring Canopy Nipple 1 and Mounting bar in order mm SOCKET RING 7 Secure the Collar ring to the Nipple 1 Open Key link 1 CUP connect Collar ring to the other one link of Chain and close the NiPpLE2 Key link 1 2 I 8 Make Wire connections with Wire Co2. nnector ai The smooth wire w marking from fixture to Black Wire from power source The ribbed wire w o marking from Fixture to White Wire from power source Attach the Ground Wire and house ground wire to the Mounting bar with the green Ground Screw Carefully tuck wires back into the Outlet Box 9 Attach the Canopy to the Mounting bar by inserting the Collar ring and then secure with the collar ring 10 Place the Glass shade Cup onto the Socket and secure with the Socket ring 11 Install the light bulbs in accordance with the fixture s specifications DO NOT EXCEED THE MAXIMUM WATTAGE RATING 12 Turn on the power at fuse or Circuit Box
Download Pdf Manuals
Related Search