Global Direct 22487 Installation Guide
Contents
1. MANUFACTURERS OF WALL DECOR LIGHTING DECORATIVE ACCESSORIES AND ACCENT FURNITURE UTTERMOST PO BOX 558 3325 GRASSY HILL RD ROCKY MOUNT VIRGINIA 24151 www uttermost com CSA055102WAUT1 DECORATIVE ACCESSORIES AND ACCENT FURNITURE MANUFACTURERS OF WALL DECOR LIGHTING UTTERMOST INSTALLATION INSTRUCTIONS PLEASE READ CAREFULLY AND SAVE THESE INSTRUCTIONS AS YOU MAY NEED THEM AT A LATER DATE CAUTION Turn off the main power at the circuit breaker before installing the fixture in order to prevent possible shock Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions FOR WALL MOUNT Fig 1 amp 2 1 A Place the 8 32 HEX NUTS 5 onto the 8 32 FIXTURE MOUNTING SCREWS 7 and attach the FIXTURE MOUNTING SCREWS to the MOUNTING BRACKET 4 or universal mounting plate whichever is provided Do not tighten the HEX NUTS at this time Fig 4 B If the fixture uses a single 1 8 IPS NIPPLE 7 for mounting thread the 1 8 IPS HEX NUT 5 onto the NIPPLE and screw the NIPPLE into the MOUNTING BRACKET 4 without tightening the HEX NUT Fig 2 2 Pull the power supply wires out from the OUTLET BOX 3 and mount the MOUNTING BRACKET 4 or the universal mounting plate to the OUTLET BOX using MOUNTING SCREWS 6 3 Attach the power supply wires to the fixture lead2. ST Remove the fixture from the POST and drill a 1 8 diameter hole at each marked position on the POST 2 Pull the power supply wires out from the POST 9 and the fixture lead wires out from the POST CAP 3 and attach the wires together by connecting BLACK to BLACK 6 and WHITE to WHITE 5 Attach the POWER SUPPLY GROUND WIRE 7 to the FIXTURE GROUND WIRE 8 using a wire connector rated for the size of wires being connected 3 Place the connected wires down inside the POST 9 and mount the POST CAP 3 in place aligning the holes in the POST CAP with the ones on the POST Secure the POST CAP to the POST using 10X1 2 long self tapping SHEET METAL SCREWS 4 provided 4 Screw a light bulbs that does not exceed the maximum wattage specified on the fixture s wattage rating label into the lamp socket Place the LAMP COVER 1 onto the top of the lamp compartment and secure in position using the DECORATIVE HEAD SCREWS 2 provided INSTALLATION COMPLETED 1 TOP COVER 2 DECORATIVE SCREWS 3 0UTLET BOX 4 MOUNTING BRACKET 5 8 32 IPS HEX NUT 6 MOUNTING SCREWS 7 FIXTURE MOUNTING SCREW 8 WHITE TO WHITE WIRE CONNECTION 9 CUPPED WASHER if provided 10 BLACK TO BLACK WIRE CONNECTION 11 POWER SUPPLY GROUND WIRE 12 FIXTURE GROUND WIRE 13 GROUND SCREW 14 CANOPY 15 DECORATIVE NUT 16 TAIL PIPE 17 TAIL SECTION 1 TOP COVER 2 DECORATIVE SCREWS 3 0UTLET BOX 4 MOUNTING BRACKET 5 1 8 IPS HEX NUT 6 MO
3. UNTING SCREWS 7 NIPPLE 8 WHITE TO WHITE WIRE CONNECTION 9 CUPPED WASHER if provided 10 BLACK TO BLACK WIRE CONNECTION 11 POWER SUPPLY GROUND WIRE 12 FIXTURE GROUND WIRE 13 GROUND SCREW 14 CANOPY 15 DECORATIVE NUT 16 TAIL PIPE 17 TAIL SECTION 18 COUPLING _ _ D Ree a eS eee 1 LAMP COVER 2 DECORATIVE HEAD SCRES 3 POST CAP 4 SHEET METAL SCREW 5 WHITE TO WHITE WIRE CONNECTION 6 BLACK TO BLACK WIRE CONNECTION 7 POWER SUPPLY GROUND WIRE 8 FIXTURE GROUND WIRE 9 POST PO BOX 558 3325 GRASSY HILL RD ROCKY MOUNT VIRGINIA 24151 www uttermost com
4. wires by connecting BLACK to BLACK or SMOOTH and WHITE to WHITE or RIBBED Attach the POWER SUPPLY GROUND WIRE 11 from the OUTLET BOX 3 connect FIXTURE GROUND WIRE 12 and POWER SUPPLY GROUND WIRE together using the correct size of wire connectors Place connected wires inside of the OUTLET BOX 4 Place the CANOPY 14 on the fixture over the OUTLET BOX 3 and onto the fixture mounting screws or NIPPLE 7 and adjust the 8 32 fixture mounting screws or NIPPLE until they protrude out from the CANOPY 1 4 Remove the CANOPY and secure the position of the fixture mounting screws or NIPPLE by tightening the HEX NUT S 5 against the MOUNTING BRACKET 4 Place the CANOPY back onto the fixture mounting screws or NIPPLE and secure into place using the DECORATIVE NUTS 15 provided 5 Screw the TALL SECTION 17 if provided onto the COUPLING 18 located at the bottom of the lamp compartment 6 Screw in light bulbs that do not exceed the maximum wattage specified on the fixture s wattage rating label into the socket located inside the lamp compartment Place the lamp cover onto the top of the lamp compartment and secure in position using the decorative head screws provided INSTALLATION COMPLETED FOR POST MOUNT Fig 3 1 Place the fixture on the top of the POST 9 on which the fixture is to be mounted and position as desired Using the holes located on the POST CAP 3 mark the hole position on the PO
Download Pdf Manuals
Related Search