Design House 519660 Instructions / Assembly
Contents
1. m Fixture to the white supply wire C Attach the fixture ground wire to the CROSS BAR with the green GROUND SCREW Then connect it to the supply ground wire with a WIRE NUT Carefully tuck wires back into the JUNCTION BOX 4 Attach the FIXTURE to the CROSS BAR through SCREW HOLES as shown and secure it with BALL NUTS 5 Attach the IRON RACK to the LAMP HOLDER and secure it with SOCKET RING 6 Install BULB not included See relamping label at socket area or packaging for maximum allowed wattage 7 Attach the IRON RACK 01 to the IRON RACK as shown and secure it with DECORATIVE NUTS Turn on the power at fuse or circuit breaker ASSEMBLY AND INSTALLATION CONT MOUNTING SCREWS aa GROUND SCREW L SCREW HOLES EF a a a nuts C c or STEMS Y w L7 FIXTURE SCREWS y B WIRE NUTS ap H4 stem C y gt BOTTOM STEM C gt LAMP HOLDER IRON RACK j SOCKET RING S gt BULB not included j IRON RACK 01 1 La DECORATIVE NUTS cay q gt 519660 519678 IF INDOUBT ABOUT ELECTRICAL INSTALLATION CONSULT A LICENSED ELECTRICIAN Customer Service 1 800 558 87002. taal AJAX PENDANT DESIGNHOUSE ASSEMBLY INSTALLATION INSTRUCTIONS Item 519660 AJAX PENDANT GAL Item 519678 AJAX PENDANT BRZ Please read carefully and save these instructions as you may need them at a later date CAUTION WARNING Risk of Fire Min 75 C supply conductors Consult a qualified electrician to ensure correct installtion Turn off the main power at the circuit breaker before installing the fixture in order to prevent possible shock GENERAL All electrical connections must be in accordance with local and National Electrical Code N E C standards If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instructions TOOLS REQUIRED Phillips screwdriver ASSEMBLY AND INSTALLATION Turn off the power at fuse or circuit breaker 1 Gently take all parts out of the package lay them on a smooth surface unscrew the BALL NUTS and the FIXTURE SCREWS Attach the CROSS BAR to the JUNCTION BOX using 2 MOUNTING SCREWS 2 Attach BOTTOM STEM to LAMP HOLDER Then install STEM and SHORT STEMS based on the desired length of the item adding FIXTURE once finished 3 Make wire connections with WIRE NUTS A Connect the black wire from Fixture to the black supply wire B Connect the white wire fro
Download Pdf Manuals
Related Search