Design House 517094 Installation Guide
Contents
1. the ends of FIXTURE SCREWS Hand tighten to secure fixture to ceiling Be sure that there are no trapped or pinched wires 9 Locate GLASS SHADE and pass over the SOCKET Thread SOCKET RING onto end of the SOCKET Hand tighten until snug 10 Install the BULB Sold separately referring to fixture labels for maximum wattage 11 Restore electrical power to installation point Retain this sheet for future reference JUNCTION BOX SUPPLY WIRE ME lee bee JUNCTION BOX SCREW CROSSBAR f ___ FIXTURE SCREW GREEN GROUND SCREW S FIXTURE CANOPY LOCKING NUT SWIVAL PIPE NIPPLE WIRE CONNECTOR 2a FIXTURE WIRE Ey o a STEM m PIPE NIPPLE STEM PIPE NIPPLE STEM m PIPE NIPPLE STEM FIXTURE SOCKET ASSEMBLY SOCKET GLASS SHADE SOCKET RING BULB Sold Separately NOTE 1 When installing lamps DO NOT EXCEED MAXIMUM WATTAGE RATING 2 Sketches are only for general reference Customer Service 1 800 558 8702. el DESIGNHOUSE MINI PENDANT SERIES ASSEMBLY INSTALLATION INSTRUCTION IF IN DOUBT ABOUT ELECTRICAL INSTALLATION CONSULT A LICENSED ELECTRICIAN 1 Before beginning the installation carefully unpack and identify all parts 2 Turn the electrical power to the installation point OFF 3 Carefully pull the wires through the STEMS into the FIXTURE CANOPY as shown in Figure 1 Thread PIPE NIPPLE into STEMS as shown Attach as many of the stems as desired to make the suitable height Note Most of Mini Pendant provided with 4 stems 6 12 12 6 The quantities and lengths of the stems depend on the style you purchased 4 Attach first STEM to SWIVAL located at bottom of CANOPY 5 Attach the last STEM to FIXTURE SOCKET ASSEMBLY and carefully pull excess wires through CANOPY 6 Using 2 JUNCTION BOX SCREWS securely fasten the CROSSBAR to the JUNCTION box 7 MAKE WIRE CONNECTIONS Position the FIXTURE under the JUNCTION BOX Connect the SUPPLY GROUND WIRE to the FIXTURE GROUND WIRE Secure both to the CROSSBAR with GREEN GROUND SCREW Using wire Connectors connect the SUPPLY WHITE WIRE S to the FIXTURE WHITE or RIBBED LEAD S Connect the SUPPLY BLACK or RED WIRE to the FIXTURE BLACK or SMOOTH LEAD S Make sure that there are no exposed wires and wrap all connections with approved electrical tape 8 Fit the heads of the FIXTURE SCREWS through the KEYHOLE in FIXTURE CANOPY Thread 2 LOCKING NUTS onto
Download Pdf Manuals
Related Search