Kenroy Home 32448ABRD Instructions / Assembly
Contents
1. TROUBLE SHOOTING 1 IF YOUR LAMP DOES NOT LIGHT CHECK PLUG AT THE OUTLET MAKE SURE THE PLUG IS FULLY AND PROPERLY INSERTED INTO THE POWER OUTLET 2 IF LAMP STILL DOES NOT LIGHT UNPLUG FROM OUTLET CHECK THE BULB FOR A BROKEN FILAMENT REPLACE BULB IF NECESSARY PLUG IN LAMP AND TURN IT ON 3 IF THE LAMP STILL DOES NOT LIGHT PLEASE CONTACT YOUR DISTRIBUTOR OR PLACE OF PURCHASE IMPORTANT SAFETY INSTRUCTIONS THIS PORTABLE LAMP HAS A POLARIZED PLUG ONE BLADE IS WIDER THAN THE OTHER AS A FEATURE TO REDUCE THE RISK AVAILABLE PARTS ARE OF ELECTRIC SHOCK THIS PLUG WILL FIT IN A POLARIZED 32448SHABRD SHADE OUTLET ONLY ONE WAY IF THE PLUG DOES NOT FIT FULLY IN HARP9 HARP THE OUTLET REVERSE THE PLUG IF IT STILL DOES NOT FIT CONTACT A QUALIFIED ELECTRICIAN NEVER USE WITH AN EXTENSION CORD UNLESS PLUG CAN BE FULLY INSERTED DO NOT ALTER THE PLUG 07 2014 32448ABRD INSTRUCTIONS2. MODEL 32448ABRD PACKING DIAGRAM lt ARDBOARD CA TITLE 20 lt 2 lt 2 STYROFOAM 12 KGS FINIAL HARP RUBBER WASHER ASSEMBLY INSIRUCIIONS READ AND SAVE THESE INSTRUCTIONS READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR TO ASSEMBLY THIS LAMP SHOULD TAKE APPROXIMATELY 5 MINUTES TO ASSEMBLE MAKE SURE ALL PARTS ARE FIRMLY TIGHTENED UNPACK THE LAMP YOU SHOULD HAVE RECENED THE FOLLOWING PARTS IN THE PACKAGE FINIAL RUBBER WASHER SHADE HARP SOCKET ASSEMBLY AND LAMP BODY TO PROTECT THE FINISH PLACE ALL PARTS ON A SOFT SURFACE ASSEMBLE THE LAMP 1 CAREFULLY ORGANIZE AND PLACE ALL PARTS ON A SMOOTH SHADE FLAT SURFACE LINE UP ALL OF THE PARTS ACCORDING TO THE 32448SHABRD ASSEMBLY DIAGRAVM REPLACEMENT PART 2 PULL THE EXCESS POWER CORD THROUGH THE BASE HARP 3 SCREW SOCKET ASSEMBLY TO TOP OF THE LAMP BODY ARP9 REPLACEMENT 4 SQUEEZE LEGS OF THE HARP TOGETHER AND INSERT THE TWO ENDS BETWEEN THE PRONGS OF THE HARP HOLDER 58 PLACE SHADE ONTO HARP THEN SECURE WITH RUBBER WASHER AND FINIAL 6 INSTALL A 150 WATI MAXIMUM MEDIUM BASE TYPE A 3 WAY BULB NOT INCLUDED INTO SOCKET SOCKET _ 7 PLUG THE POWER CORD INTO AN OUTLET AND TURN ON AT s SWITCH BULB REPLACEMENT 1 BEFORE REPLACING THE BULB BE SURE THAT THE SHADE AND BULB ARE COOL AND LAMP IS UNPLUGGED 2 UNSCREW EXISTING BULB FROM SOCKET AND REPLACE WITH A NEW BULB PLUG POWER SUPPLY CORD BACK INTO OUTLET
Download Pdf Manuals
Related Search