the great outdoors by Minka Lavery 9060-91 Instructions / Assembly
Contents
1. 9medium base not supplied in accordance with the fixture s specifications DO NOT EXCEED THE MAXIMUM WATTAGE RATING NE PAS DEPASSER LA PUISSANCE NOMINALE MAXIMALE 10 Connect the top cover K to the fixture body M with screws N 11 To prevent moisture from entering the outlet box and causing a short use clear caulking i e Indoor Outdoor Silicone Sealant to outline the outside of fixture back plate where it meets the wall leaving a space at bottom to allow moisture a means to escape Fig 3 Your installation is now complete Return power to the junction box and test the fixture Set A A 020 1 Mounting plate Ground screw Mounting screws 2 Fig 2 FIXTURE FIXTURE gt FIXTURE C gt WIRES WIRES WIRES Black or White or Bare Smooth Ribbed Copper x X Ground WIRES White Neutral Caulki ng Backplate cib american NAT lighting Intertek ass ocila tio ni2. INSTALLATION INSTRUCTIONS For Model 9060 READ AND SAVE THESE INSTRUCTIONS WARNING SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER AVERTISSEMENT COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR HANGING THE FIXTURE Fig 1 1 Shut off the power at the circuit breaker and remove the old fixture including the mounting hardware 2 Carefully unpack your new fixture and lay out all the parts on aclear area Take care not to lose any small parts necessary for installation 3 Thread the 2 mounting screws E into the mounting plate C spaced the same distance apart as the holes in the fixture back plate You can adjust the length of the screws if necessary 4 Attach the mounting plate C to the outlet box A not supplied with mounting screws B Size 8 32 0 78 L CONNECTING THE WIRES Fig 2 5 Connect the electrical wires as shown in Fig 2 Making sure that all wire connectors are secured If your outlet box has a ground wire green or bare copper connect the fixture s ground wire to it Otherwise connect the fixture s ground wire directly to the circular strap using the green screw provided COMPLETING THE INSTALLATION Fig 1 6 Align the fixture M to the mounting plate C and secure with cap nuts F 7 Attach the bottom finial P to stem O and top finial G to the top cover K 8 Fix the glass into the fixture body M with the clips gaskets and screws provided 9 Install the bulb A 1
Download Pdf Manuals
Related Search