the great outdoors by Minka Lavery 8206-94 Instructions / Assembly
Contents
1. ED ELECTRICIAN TO ENSURE Fig 2 CORRECT BRANCH CIRCUIT CONDUCTOR rme ee HH mies WIRES WI RES BLACK WHITE COPPER 7 HOUSE MRES WHITE GREEN NEUTRAL BARE COPPER GROUND UL american Ite hting LISTED association2. INSTALLATION INSTRUCTIONS Model 8206 READ AND SAVE THESE INSTRUCTIONS W ARNING SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER 1 Shut off power at the circuit breaker and remove old Fig 1 fixture including mounting hardware 2 Carefully unpack your new fixture and lay out all the K ie A parts in aclear area Take care not to misplace any C B small parts necessary for installation i 3 Unscrew the cap nut F then move the top cover J D ZA insert the nipple C with the rubber B and the f inial A reas RA E into the top cover J have the key washer D through NY aa ee the nipple C with the hex nut E tightly inside the top bs cover J Fig 1 Tl L 4 Pull black white and ground wires out of post I Uy 5 Connect electrical wires while supporting the lantern If your post has a ground wire green or bare copper AN connect the fixture ground wire to it If not consult your Ua electrician for proper grounding After wires are E connected tuck them carefully inside the post cup G Align the lantern with post I and secure with sheet metal screws H Fig 1 amp 2 6 At this point install the light bulb in accordance with the fixture specification DO NOT EXCEED THE MAXIMUM WATTAGE RATING 7 Replace the top cover J and secure with cap nut F Your installation is now complete Return power to and test the fixture CAUTION RISK OF FIRE CONSULT A QUALIFI
Download Pdf Manuals
Related Search