Kenroy Home 32414ORB Installation Guide
Contents
1. 8 PLACE SHADE OVER THE NIPPLE OF STEM AND SECURE WITH FINIAL 9 INSTALL A 100 WATT MAXIMUM MEDIUM BASE TYPE A BULB NOT INCLUDED INTO EACH SOCKET 10 PLUG THE POWER CORD INTO AN OUTLET AND TURN ON AT SWITCH BULB REPLACEMENT 1 BEFORE REPLACING THE BULB BE SURE THAT THE SHADE AND BULB ARE COOL AND LAMP IS UNPLUGGED 2 UNSCREW EXISTING BULB FROM SOCKET AND REPLACE WITH A NEW BULB PLUG POWER SUPPLY CORD BACK INTO OUTLET TROUBLE SHOOTING 1 IF YOUR LAMP DOES NOT LIGHT CHECK PLUG AT THE OUTLET MAKE SURE THE PLUG IS FULLY AND PROPERLY INSERTED INTO THE POWER OUTLET 2 IF LAMP STILL DOES NOT LIGHT UNPLUG FROM OUTLET CHECK THE BULB FOR A BROKEN FILAMENT REPLACE BULB IF NECESSARY PLUG IN LAMP AND TURN IT ON 3 IF THE LAMP STILL DOES NOT LIGHT PLEASE CONTACT YOUR DISTRIBUTOR OR PLACE OF PURCHASE IMPORTANT SAFETY INSTRUCTIONS THIS PORTABLE LAMP HAS A POLARIZED PLUG ONE BLADE IS WIDER THAN THE OTHER AS A FEATURE TO REDUCE THE RISK OF AVAILABLE PART IS ELECTRIC SHOCK THIS PLUG WILL FIT IN A POLARIZED OUTLET ONLY 32414SHORB SHADE ONE WAY IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET REVERSE THE PLUG IF IT STILL DOES NOT FIT CONTACT A QUALIFIED ELECTRICIAN NEVER USE WITH AN EXTENSION CORD UNLESS PLUG CAN BE FULLY INSERTED DO NOT ALTER THE PLUG 04 2014 324140RB INSTRUCTIONS2. MODEL 32414 PACKING DIAGRAM ARDBOARD SOCKET ASSEMBLY amp UPPER COLUMN POLE 2 PCS OWER COLUMN 0 CA TITLE 2 INIAL RUBBER WASHER METAL WASHER AND STEM STYROFOAM 12 KGS STYROFOAM 12 KGS ARDBOARD ASSEMBLY INSTRUCIIONS READ AND SAVE THESE INSTRUCTIONS READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR TO ASSEMBLY SHADE THIS LAMP SHOULD TAKE APPROXIMATELY 10 MINUTES TO ASSEMBLE 32414SHORB REPLACEMENT MAKE SURE ALL PARTS ARE FIRMLY TIGHTENED PART UNPACK THE LAMP RUBBER WASHER YOU SHOULD HAVE RECENED THE FOLLOWING PARTS IN THE METAL WASHER pACKAGE FINIAL SHADE RUBBER WASHER METAL WASHER STEM SOCKET ASSEMBLY UPPER COLUMN UPPER POLE NIPPLE LOWER COLUMN LOWER POLE AND BASE TO PROTECT THE FINISH PLACE ALL PARTS ON A SOFT SURFACE ASSEMBLE THE LAMP 1 CAREFULLY ORGANIZE AND PLACE ALL PARTS ON A SMOOTH FLAT OCKET 2 PCS SURFACE LINE UP ALL OF THE PARTS ACCORDING TO THE ASSEMBLY DIAGRAVM SOCKET r 2 SCREW THE LOWER POLE TO TOP OF THE BASE PULL CHAIN SWITCH 3 PLACE LOWER COLUMN ONTO THE LOWER POLE AND SCREW NIPPLE INTO THE LOWER POLE PPER COLUMN 4 SCREW UPPER POLE TO END OF THE NIPPLE S PLACE UPPER COLUMN ONTO THE UPPER POLE PULL THE EXCESS POWER CORD THROUGH THE BASE THEN SCREW THE NIPPLE OF SOCKET ASSEMBLY INTO THE UPPER POLE TO SECURE 6 SCREW STEM TO TOP OF THE SOCKET ASSEMBLY 7 SLIDE METAL WASHER AND RUBBER WASHER OVER THE NIPPLE OF THE STEM
Download Pdf Manuals
Related Search