Kenroy Home 32401AMB Instructions / Assembly
Contents
1. SUPPLY CORD BACK INTO OUTLET TROUBLE SHOOTING 1 IF YOUR LAMP DOES NOT LIGHT CHECK PLUG AT THE OUTLET MAKE SURE THE PLUG IS FULLY AND PROPERLY INSERTED INTO THE POWER OUTLET 2 IF LAMP STILL DOES NOT LIGHT UNPLUG FROM OUTLET CHECK THE BULB FOR A BROKEN FILAMENT REPLACE BULB IF NECESSARY PLUG IN LAMP AND TURN IT ON 3 IF THE LAMP STILL DOES NOT LIGHT PLEASE CONTACT YOUR DISTRIBUTOR OR PLACE OF PURCHASE IMPORTANT SAFETY INSTRUCTIONS THIS PORTABLE LAMP HAS A POLARIZED PLUG ONE BLADE IS WIDER THAN THE OTHER AS A FEATURE TO REDUCE THE RISK OF ELECTRIC SHOCK THIS PLUG WILL FIT IN A POLARIZED OUTLET ONLY ONE WAY IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET REVERSE THE PLUG IF IT STILL DOES NOT FIT CONTACT A QUALIFIED ELECTRICIAN NEVER USE Ava AR Panls at WITH AN EXTENSION CORD UNLESS PLUG CAN BE FULLY LWHARP 8 5 CH HARP INSERTED DO NOT ALTER THE PLUG 32401SHAMB SHADE 03 2014 32401AMB INSTRUCTIONS2. MODEL 32401 PACKING DIAGRAM ARDBOARD CA TITLE 20 FINIAL HARP amp RUBBER WASHER ARDBOARD SOCKET ASSEMBLY STYROFOAM 12 KGS MP BODY STYROFOAM 12 KGS ASSEMBLY INSIRUCIIONS O NL READ AND SAVE THESE INSTRUCTIONS READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR TO RUBBER ASSEMBLY WASHER THIS LAMP SHOULD TAKE APPROXIMATELY 5 MINUTES TO ASSEMBLE MAKE SURE ALL PARTS ARE FIRMLY TIGHTENED UNPACK THE LAMP YOU SHOULD HAVE RECENED THE FOLLOWING PARTS IN THE PACKAGE FINIAL RUBBER WASHER SHADE HARP SOCKET ASSEMBLY AND LAMP BODY TO PROTECT THE FINISH PLACE ALL PARTS ON A SOFT SURFACE ASSEMBLE THE LAMP 1 CAREFULLY ORGANIZE AND PLACE ALL PARTS ON A SMOOTH FLAT SURFACE LINE UP ALL OF THE PARTS SHADE ACCORDING TO THE ASSEMBLY DIAGRAM 2401SHAMB REPLACEMENT PART 3 SQUEEZE LEGS OF THE HARP TOGETHER AND INSERT THE ss TWO ENDS BETWEEN THE PRONCGS OF THE HARP HOLDER LWHARP 8 5 CH 4 PLACE SHADE ONTO HARP THEN SECURE WITH RUBBER REPLACEMENT WASHER AND FINIAL 2 SCREW SOCKET ASSEMBLY TO TOP OF THE LAMP BODY 5 INSTALL A 150 WATT MAXIMUM MEDIUM BASE TYPE A 3 WAY BULB NOT INCLUDED INTO THE SOCKET 6 PLUG THE POWER CORD INTO AN OUTLET AND TURN ON AT SWITCH BULB REPLACEMENT 1 BEFORE REPLACING THE BULB BE SURE THAT THE SHADE SOCKET AND BULB ARE COOL AND LAMP IS UNPLUGGED 2 UNSCREW EXISTING BULB FROM SOCKET AND REPLACE WITH A NEW BULB PLUG POWER
Download Pdf Manuals
Related Search