Sea Gull Lighting 44663-839 Installation Guide
Contents
1. the ground wire from the fixture if supplied and the outlet box to it using a small wire connector not supplied NEVER CONNECT GROUND WIRE TO BLACK OR WHITE POWER SUPPLY WIRES GREEN SUPPLY GROUNDING ROUND teal FIXTURE 2 SCREW G WIRE GROUND WIRE WIRE CONNECTOR SCREWS F FINAL ASSEMBLY STEP 5 Make sure no bare wires can be seen outside wire connectors After wires are connected tuck them carefully inside outlet box Push the canopy I firmly over the mounting screws F and against the wall Secure canopy I in place by threading cap nuts E onto fixture mounting screws F Place shade A on socket cup B and secure by threading retaining ring H onto socket STEP 7 Install lamps not supplied MOUNTING CANOPY I RETAINING SZ RING H NOT INCLUDED2. Na Installation And Safety Instructions HC 1432 il li hbj Line art shown may not exactly match the fixture enclosed However the installation instructions do apply to sta gu ig mg this fixture Fill in Item Number on Carton and File This Sheet For Future Reference ITEM 081908 IMPORTANT SAFETY INSTRUCTIONS CLEANING e Be sure the electricity to the system you are working on is turned To clean wipe fixture with a soft cloth Clean glass with a mild soap off either the fuse removed or the circuit breaker set at off Do not use abrasive materials such as scouring pads or powders e Use of other manufacturers components will void warranty listing steel wool or abrasive paper and create a potential safety hazard e f you are unclear as to how to proceed contact a qualified electrician e You don t need special tools to install this fixture ORDERING PARTS e Be sure to follow the steps in the order given Keep this sheet for future reference and in case you need to order e Read instructions carefully replacement parts Parts for this fixture can be ordered from place of e Save these instructions purchase Be sure to use exact wording from illustration when ordering parts BEFORE YOU BEGIN INSTALLATION Carefully remove the fixture from the carton and check that all parts IMPORTANT DO NOT ATTACH FIXTURE DIRECTLY TO OUTLET BOX are included as shown in figure 1 Be careful not to misplace any of the screws or parts which are need
3. ed to install this fixture STEP 1 Place back plate D against wall and mark location for drywall anchors Remove back plate D and drill appropriate sized holes into drywall for anchors Pull supply wires through appropriate opening in backplate D Place backplate D against wall and secure by installing dry wall screws into anchors Install outlet box screws not supplied into outlet box through appropriate openings in backplate D if applicable DRYWALL BACKPLATE FIXTURE GREEN SUPPLY WIRE MOUNTING ANCHOR D GROUND GROUNDING GROUND CONNECTOR SCREWS F WIRE SCREW G WIRE OPENING FOR DRYWALL SCREWS FIGURE 1 NOT INCLUDED INSTALLATION continued HC 1432 STEP 3 A Use a listed wire connector to connect the fixture hot wire black wire or round and smooth tracer to the supply hot wire B Use a listed wire connector to connect the fixture common wire white wire or square and rigid to the supply common wire C Gently try to remove the wires from the connector If you can remove the wires carefully re do the wiring connection GROUNDING INSTRUCTIONS The green grounding screw G is to be inserted into the hole with two raised dimples provided on the backplate D Wrap the ground wire from the fixture if supplied and the ground wire from the outlet box bare metal or green insulated wire around the green grounding screw G on the backplate D if uninsulated wire is on the backplate D connect
Download Pdf Manuals
Related Search