Kenroy Home 32306ORB Installation Guide
Contents
1. POWER SUPPLY CORD BACK INTO OUTLET TROUBLE SHOOTING 1 IF YOUR LAMP DOES NOT LIGHT CHECK PLUG AT THE OUTLET MAKE SURE THE PLUG IS FULLY AND PROPERLY INSERTED INTO THE POWER OUTLET 2 IF STILL 0065 NOT LIGHT UNPLUG FROM OUTLET CHECK THE BULB FOR A BROKEN FILAMENT REPLACE BULB IF NECESSARY PLUG IN LAMP AND TURN IT ON 3 IF THE LAMP STILL DOES NOT LIGHT PLEASE CONTACT YOUR DISTRIBUTOR OR PLACE OF PURCHASE IMPORTANT SAEFETY INSTRUCTIONS THIS PORTABLE LAMP HAS A POLARIZED PLUG ONE BLADE IS WIDER THAN THE OTHER AS A FEATURE TO REDUCE THE RISK OF ELECTRIC SHOCK THIS PLUG WILL FIT IN A POLARIZED OUTLET ONLY 12 ONE WAY IF THE PLUG DOES NOT FIT FULLY IN THE OUTLET REVERSE THE PLUG IF IT STILL 0065 NOT FIT CONTACT A QUALIFIED LWHARP 8 PB HARP ELECTRICIAN NEVER USE WITH AN EXTENSION CORD UNLESS PLUG CAN BE FULLY INSERTED DO NOT ALTER THE PLUG 05 2013 525060 8 INSTRUCTIONS2. M0 L 3235060RB PACKING DIAGRAM INIAL HARP 8 RUBBER WASHER ARDBOARD SOCKET ASSEMBLY AMP BODY STYROFOAM 12 KGS ASSEMBLY INSTIRUCTIONS READ AND SAVE THESE INSTRUCTIONS i WASHER READ INSTRUCTIONS ALL THE WAY THROUGH PRIOR TO ASSEMBLY THIS LAMP SHOULD TAKE APPROXIMATELY 5 MINUTES TO ASSEMBLE MAKE SURE ALL PARTS ARE FIRMLY TIGHTENED UNPACK THE LAMP YOU SHOULD HAVE RECENED THE FOLLOWING PARTS IN THE PACKAGE FINIAL RUBBER WASHER SHADE HARP SOCKET ASSEMBLY NECK AND LAMP BODY TO PROTECT THE FINISH PLACE ALL PARTS ON A SOFT SURFACE ASSEMBLE THE LAMP 1 CAREFULLY ORGANIZE AND PLACE ALL PARTS ON A SMOOTH FLAT SHADE SURFACE LINE UP ALL OF THE PARTS ACCORDING TO THE ASSEMBLY 32306SHORB DIAGRAM REPLACEMENT PART 2 PULL THE EXCESS POWER CORD THROUGH THE BASE 3 SLIDE NECK OVER THE NIPPLE THEN SCREW SOCKET ASSEMBLY HARP TO TOP OF THE LAMP BODY LWHARP 8 PB REPLACEMENT 4 SQUEEZE LEGS OF THE HARP TOGETHER AND INSERT THE TWO ENDS BETWEEN THE PRONGS OF THE HARP HOLDER 5 PLACE SHADE ONTO HARP THEN SECURE WITH RUBBER WASHER AND FINIAL 6 INSTALL A 150 WATT MAXIMUM MEDIUM BASE TYPE A 3 WAY SOCKET BULB NOT INCLUDED INTO SOCKET ASSEMBLY 7 PLUG THE POWER CORD INTO AN OUTLET AND TURN ON AT SWITCH BULB REPLACEMENT 1 BEFORE REPLACING THE BULB BE SURE THAT THE SHADE AND BULB ARE COOL AND LAMP IS UNPLUGGED 2 UNSCREW EXISTING BULB FROM SOCKET AND REPLACE WITH A NEW BULB PLUG
Download Pdf Manuals
Related Search