Minka Lavery 4362-281 Instructions / Assembly
Contents
1. INSTALLATION INSTRUCTION FOR 4362 281 WARNING SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER READ AND SAVE THESE INSTRUCTIONS PREPARATION 1 Shut off power at the fuse box or circuit breaker box If necessary Remove old fixture and all mounting hardware from wall junction box 2 Carefully unpack your new fixture and lay out all the parts on a clear area Take care not to loose any small parts necessary for installation ASSEMBLING THE FIXTURE 3 Thread pipe K into the coupling L thread pipe J into pipe K thread pipe I into pipe J thread the pipe H onto the nipple I thread the pipe G onto the nipple H 4 Thread the pipe G onto the coupling F MOUNTING THE FIXTURE FIG 1 5 Thread the two mounting screws A part way into the mounting bar B Secure the mounting bar B to junction box not provided with the junction box screws C through slotted holes in mounting bar B CONNECTING THE WIRES Fig 2 6 Connect the fixture wires to the junction box wires as shown in Fig 2 Make sure all wire connectors are secure and do not easily pull off with a slight tug If there is no Green Ground Wire from the junction box connect the Fixture Ground Wire to the Circular Strap or the Mounting bar with the Green Screw provided 7 Tuck these wire connections neatly into the wall junction box 8 Raise the canopy D allowing for the mounting screws A to protrude through the holes on the canopy D the2. n secure with the finials E 9 Attach the connection parts O to lamp body M by finial N And then attach the lamp shade Q to lamp body M by finial R COMPLETING THE INSTALLATION 10 Install the proper light bulbs for your fixture DO NOT EXCEED THE SPECIFIED WATTAGE 11 Place the plastic washers U Glass diffuser T plastic Fig 2 washers S to the nipples of the U shape steel pipe V and then move the U shape steel pipe V Into the joint P of the connection parts O screw the joint P FIXTURE ee dinni a i FIXTURE ea until the glass diffuser attached onto the connection eee a pe parts firmly Bare Return the power to the junction box and test the round fixture Your installation is now complete WIRES WIRES White Neutral Green or l l HOUSE HOUSE I I Bare Copper Ground Minka Lighting Inc This product is protected by United States Federal and or State Law including Patent and or Copyright laws PTh E american lighting association
Download Pdf Manuals
Related Search