Casablanca 99030 Instructions / Assembly
Contents
1. Traditional 4 Light Fitter Models 99029 99030 99031 99032 99033 99034 99103 99104 99105 Compatible with 2xxxx Types A Z 51000 58999 fan series 59500 59999 fan series Select Casablanca Fans Wire Housing Connector a ea W N N lt 7 w er If your fan does not have pin connectors on the wires coming from the switch housing install the wiring harness provided Using the provided wire connectors connect the white wire from the fan to the white wire from the wire harness and connect the black or blue wire from the fan to the black wire from the wire harness Switch Wire Housing Connector TYPE B ASSEMBLY If your fan does not have pin connectors on the wires coming from the switch housing install the wiring harness provided Using the provided wire connectors connect the white wire from the fan to the white wire from the wire harness and connect the black or blue wire from the fan to the black wire from the wire harness Read entire installation instructions carefully before beginning installation and save these instructions Using the single pin connectors connect the black or blue wire from the fan to the black wire from the light kit Connect the white wire from the fan to the white wire from the light kit Note Do not allow the light kit to hang only by the wire connectors Light Kit Screw Feed the light kit wires through the center hole in the switch housing Then attach the s2. o NEXT PAGE Housing Assembly Screw Lift the light kit up to meet the upper switch housing Install the switch housing assembly screws Tighten screws Improper installation could cause the light fixture to fall or result in electrical shock or personal injury 1 e FOR BOTH ASSEMBLIES Socket e Shade not included Socket gt aa Ring Socket Ring Tool Installing the shades Remove the socket rings from the sockets Install each shade onto a socket Install the socket rings onto the sockets by turning them clockwise using the socket ring tool ONE YEAR WARRANTY This product is warranted to the original purchaser by Casablanca Fan Company Hunter Fan Company against defects in material and workmanship for one 1 year from date of purchase During the warranty period we will repair or at our option replace a defective product at no charge For information on how to obtain service contact the Casablanca Hunter Service Department by calling our toll free number at 888 830 1326 Damage to the product caused by mishandling improper installation or modification is not covered by this warranty This warranty is given in lieu of all other warranties expressed or implied Some states do not allow limitations of time on an implied warranty therefore the above limitations may not apply in every case This warranty states specific legal rights which may vary from state to state Installing the bulb Ins
3. tall a bulb into each socket When necessary replace bulbs with bulbs of same type and wattage Installing the pull chain pendant Attach the pull chain pendant to the end of the short chains coming from the switch housing and the light kit TROUBLESHOOTING Lights don t come on Make sure that the bulbs are properly installed Make sure power switch is on Pull the pull chain to make sure it is on Check the circuit breaker to ensure the power is turned on Check the pin connections in the light kit Refer to the fan manual for locating the fan s wiring Verify that the light and power wires are correctly connected to the ceiling and the light kit If you have problems installing or operating your light kit do not return this product to the dealer Call our Consumer Affairs Hotline 888 830 1326 Monday through Friday 8 am to 4 30 pm Central MA002 01 07 24 13 a 1 888 830 1326 Pull Chain Pendant To turn lights on and off pull the pull chain pendant coming from the center of the light kit READ AND SAVE THESE INSTRUCTIONS This product conforms to UL Standard 507 A WARNINGS w 1 To reduce the risk of fire electrical shock or personal injury mount fan directly from building structure and or an outlet box marked acceptable for fan support of 70 Ibs 31 8 kg and use the mounting screws provided with the outlet box w 2 To avoid possible electrical shock before installing or servicing yo
4. ur fan disconnect the power by turning off the circuit breakers to the outlet box and associated wall switch location If you cannot lock the circuit breakers in the off position securely fasten a prominent warning device such as a tag to the service panel A CAUTIONS c 1 All wiring must be in accordance with national and local electrical codes ANSI NFPA 70 If you are unfamiliar with wiring use a qualified electrician
5. witch housing to the light kit by installing the light kit screws into the bottom of the switch housing WHICH ASSEMBLY METHOD WILL I USE If your fan s switch housing cap resembles this one remove the cap screws with a Phillips head screwdriver Then follow the instructions for TYPE A clo re NEXT PAGE Lift the light kit up to meet the lower switch housing Guide the two pre installed light kit screws into the holes in the lower switch housing Tighten screws Using the single pin connectors connect the black or blue wire from the fan to the black wire from the light kit Connect the white wire from the fan to the white wire from the light kit Note Do not allow the light kit to hang only by the wire connectors MA002 01 07 24 13 Switch Housing Housing Cap Screw If your fan s switch housing cap resembles this one remove the whole switch housing by removing the switch housing screws with a ASSEMBLY Phillips head screwdriver Remove the plug button Then follow the TYPE B ASSEMBLY INSTRUCTIONS a 1 888 830 1326 Housing S Switch Assembly Housing Screw Cap If your fan s switch housing cap resembles this one remove the whole switch housing by removing the switch housing screws with a Phillips head screwdriver Remove the two cap screws from the inside of the switch housing Reinstall the switch housing Tighten the switch housing screws Then follow the instructions for TYPE A ASSEMBLY coj e
Download Pdf Manuals
Related Search