AireRyder LK34225OR Instructions / Assembly
Contents
1. with 2 set screws to the switch box cover 4 Make wire connections with the wire nuts Connect black wire from light kit to blue wire from the fan Connect white wire form light kit to white wire from the fan Carefully tuck wires back into the switch box cover 5 Reinstall the switch box cover with the 3 screws 6 Install bulbs Please do not exceed the maximum capacity which is recommended on the package 7 Thread the pull chain through the glass shade rubber washer metal washer and hex nut in order and secure with the hex nut to the nipple 8 Thread the pull chain through the cap and finial and secure with the finial to the nipple 9 Thread the pull chain of the fan through the glass shade and the cap Make sure the hole of glass shade and the hole of the cap for fan was match 10 Turn on the power at fuse or circuit box aireRyder 0704242. ASSEMBLY AND INSTALLATION INSTRUCTIONS LK34235 LK34225 LK34285 48813 WARNING TO AVOID RISK OF ELECTRICAL SHOCK BE SURE TO SHUT OFF POWER WHILE INSTALLING OR SERVICING THIS FIXTURE NOTE 1 Before installing consult local electrical codes for wiring and grounding requirements 2 The combined weight of your ceiling fan and light kit can not exceed 35 pounds unless additional support is provided for the fan Fig 1 Motor mippren Switch Box Fixture Wire Nut Hex Nut Washer Screw fo Plug Switch Box cover Nipple 14 lt Nipple Light kit Fig 2 Motor Glass shade Screw T Switch Box Wire Nut Terminal Groove Terminal Tongue Rubber Washer Metal Washer Switch Box cover 8 amp HexNut Cap Nipple 1 Light kit Pull Chain for Fan 6 Finial om jm Set Screw Pull Chain Installation Steps 1 Remove the switch box cover from the fan by loosing 3 screws 2 Unscrew and discard the plug from the switch box cover 3 Attach the light kit to the switch box cover For fans of the Fig 1 please attach the nipple 1 of the light kit to the hole of the switch box cover and then thread the wires through the washer and hex nut and secure tightly For fans of the Fig 2 please attach the nipple 1 of the light kit to the hole in the center of the switch box cover and then secure
Download Pdf Manuals
Related Search