World Imports WI720337 Installation Guide
Contents
1. FLUORESCENT FLUSH MOUNT FIXTURE ASSEMBLY amp INSTALLATION INSTRUCTIONS Please read carefully and save this instruction sheet as you may need it at a later date CAUTION Turn off the main power at the circuit breaker before installing the fixture in order to prevent possible shock GENERAL All electrical connections must be in accordance with local and National Electrical Code N E C standards If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician Remove the fixture and the mounting package from the box and make sure that no 10 11 parts are missing by referencing the illustrations on the installation instructions ASSEMBLY AND INSTALLATION Turn off power at the circuit breaker Detach the FRAME 19 and the ACRYLIC LENS 17 from the FIXTURE BODY 10 by removing the THUMB SCREWS 18 Detach the BALLAST COVER 16 from the FIXTURE BODY 10 by removing the BALLAST COVER SCREWS 21 Place the FIXTURE BODY 10 onto the desired location centering it over the OUTLET BOX 1 Mark the location of all the KEYHOLE SLOTS 20 Remove the FIXTURE BODY 10 from the ceiling Drill appropriately sized holes at the marked keyhole locations Insert the CEILING ANCHORS 9 into the holes Thread the MOUNTING SCREWS 12 halfway into the CEILING ANCHORS 9 Pull all the supply wires from the OUTLET BOX 1 and feed them through the center hole of the COVER PLATE 11 Secure the COVER P2. LATE 11 to the OUTLET BOX 1 using the COVER PLATE SCREWS 15 Feed the supply wires through the center hole of the FIXTURE BODY 10 Place the FIXTURE BODY 10 onto the desired location making sure that the halfway threaded MOUNTING SCREWS 12 feed through the large openings of the KEYHOLE SLOTS 20 Slide the FIXTURE BODY 10 so that the MOUNTING 3 SCREWS 12 slide into the narrow slots of the KEYHOLE SLOTS 20 Tighten the MOUNTING SCREWS 12 down to secure the FIXTURE BODY 10 in place 3 Connect the BLACK FIXTURE WIRE 5 to the BLACK SUPPLY WIRE 6 4 and the WHITE FIXTURE WIRE 8 to the WHITE SUPPLY WIRE 7 using the provided WIRE NUTS 3 Similarly connect the FIXTURE GROUND 5 WIRE 4 to the SUPPLY GROUND WIRE 2 Ts Carefully tuck all wire connections into the FIXTURE BODY 10 Replace the BALLAST COVER 16 and secure it in place using the BALLAST COVER SCREWS 21 Insert FLUORESCENT BULBS 14 into the provided LAMP SOCKETS 13 Turn each FLUORESCENT BULB turn until there is a click Be sure to use the lamp type and wattage specified on the lamp replacement label Re attach the FRAME 19 and the ACRYLIC LENS 17 to the FIXTURE BODY 10 NOTE For ease of installation a SUPPORT PIN 22 is provided at one end of the FRAME 19 During this step angle this end of the FRAME 19 toward the end of the FIXTURE BODY 10 with the SUPPORT PIN HOLE 23 Feed the SUPORT PIN 22 through the HOLE 23 Lift the the other end of
3. the FRAME 19 toward the FIXTURE BODY 10 and secure this end of the FRAME 19 using the provided THUMB SCREWS 18 Secure the other end using THUMB SCREWS 18 Restore power at the circuit breaker 16 BALLAST COVER OUTLET BOX 17 ACRYLIC LENS SUPPLY GROUND 8 WHITE FIXTURE WIRE 18 THUMB SCREW WIRE 9 CEILING ANCHOR 19 FRAME WIRE NUT 10 FIXTURE BODY 20 KEYHOLE SLOT FIXTURE GROUND 11 COVER PLATE 21 BALLAST COVER WIRE 12 MOUNTING SCREW SCREW BLACK FIXTURE 13 LAMP SOCKET 22 SUPPORT PIN not WIRE 14 FLUORESCENT BULB shown BLACK SUPPLY WIRE not provided 23 SUPPORT PIN WHITE SUPPLY WIRE 15 COVER PLATE SCREW HOLE not shown
Download Pdf Manuals
Related Search