Minka Lavery 4751-206 Installation Guide
Contents
1. 9 Lace the fixture wires through the chain lt v direction you twist the wire connector onto wires INSTALLATION INSTRUCTIONS FOR 4751 206 WARNING SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER EMBLING THE FIXTURE Fig 2 Slide the metal frame B and the glass shade C onto the socket Of the fixture body A then place the collar ring D and secure it with the check ring E until tight Install the light bulbs in accordance with the fixture specifications NOTE DO NOT EXCEED THE SPECIFIED WATTAGE HANGING THE FIXTURE Fig 1 Shut off the power at the circuit breaker and remove old fixture from ceiling including the old crossbar Carefully unpack new fixture and lay all the parts on a clear surface Thread nipple C into loop F until snug Thread other end of nipple C with loop attached into crossbar D until snug Place lock washer B over end of nipple protruding through crossbar and thread hex nut A onto nipple until tight Take this crossbar assembly and mount to ceiling junction box with junction box screws E Tighten screws securely with screwdriver Using proper chain pliers to open one end link of the chain provided and connect to the fixture loop J Close the link 3 By measuring determine correct number of links needed for proper hanging height Using proper chain pliers disconnect and discard remaining chain ASS l 0 Slip loop2. collar H over the chain then do the same with the _ canopy G Open the other end link of the chain and hang the fixture on the loop at the ceiling Close the link Feed the fixture wires through the loop F and nipple C and pull lt until taut CONNECTING THE WIRES Fig 3 1 Take the black wire from the ceiling junction box and the smooth wire leg from the fixture and twist bare ends together Twist wire connector onto end of wire until snug Repeat same process with white junction box wire and ribbed wire leg of fixture wire NOTE Twist wires together in the same _If your junction box has a grounding wire green or bare copper attach this wire andthe bare copper wire from the fixture together as step 1 If junction box has no ground wire attach the bare lt copper fixture wire to the green ground screw on the crossbar Tuck these wire connections neatly into the ceiling outlet box and then raise the canopy G all the way to the ceiling Raise the loop H and thread onto ceiling loop protruding through canopy Your installation is now complete Return power to the junction box and test the fixture Fig 3 eS rs Es FLXTURE Fl XTURE WRS WRES Vti teor Bare Ribbed pper ka HOUSE G ound H WRSS WRS WRES Back Vii te Geen or Hb Neutral Bare Copper G ound Junction Box Ceiling CHAIN HUNG FIXTURE INSTRUCTION i i Notice It is importa
3. nt to use proper chain pliers not included To OPEN and CLOSE the chain included with this fixture Do not open them with other tools that may twist or stress the chain links It is important to use proper chain pliers like the ones shown in the diagram i ko american ee lighting LISTED association
Download Pdf Manuals
Related Search