Minka Lavery 6962-284 Instructions / Assembly
Contents
1. me SS ee lee 1 At this point connect the electrical wires as shown i WIE OR A GREEN OR ASA in Fig 2 making sure that all wire connectors are BMGT ose RGSS hae secured If your outlet box has a ground wire green WIRES Pane EROJN TISUSE or bare copper connect the fixture s ground wire to it e ARR ee Otherwise connect the fixture s ground wire directly to NEUTRAT TO TOPPER the mounting strap using the green screw provided GRRE 2 Tuck the wire connections neatly into the wall junction box Your installation is now complete Return power to the outlet box and test the fixture D Be Intertek association2. INSTALLATION INSTRUCTIONS FOR FIXTURE 6962 WARNING SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER AVERTISSEMENT COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR MOUNTING THE FIXTURE 1 Shut off the power at the fuse box or circuit breaker If necessary remove the old fixture from wall including the mounting hardware 2 Carefully remove the new fixture from the carton and check that all parts are included as shown in the illustration Thread the nipple C into the mounting strap A Place the washer F over the nipple protruding through the mounting strap and thread lock nut E tightly onto nipple C ae 5 Attach the mounting strap A to the outlet box using See the outlet box screws B The side of the mounting Mounting screws 2 plate marked GND must face out Follow the wiring instructions carefully See Fig 2 Attach the fixture back plate L over the mounting strap A allowing the nipple C to protrude through the center hole of the back plate L Then secure with hex nut M and finial K 8 Place the glass shade I and cushion ring H over i the socket J and secure with socket ring G i Socket Ring SKT RING 26 9 Install the bulbs in accordance with fixture s specifications DO NOT EXCEED THE MAXIMUM WATTAGE RATING NE PAS DEPASSER LA PUISSANCE NOMINALE Pwo NO MAXIMALE Wiring See fig 2
Download Pdf Manuals
Related Search