Minka Lavery 1683-14 Installation Guide
Contents
1. 8 By measuring determine correct number of links needed for INSTALLATION INSTRUCTION CH 1 For Chain Hung Light Fixtures ev o2 2 98 RA i i j AKER HANGING THE FIXTURE Fig 1 1 Shut off the power at the circuit breaker and remove old fixture from ceiling including the old crossbar JUNCTION BOX 2 Carefully unpack new fixture and lay all the parts on a clear CEILING surface Thread nipple C into loop F until snug Thread other end of nipple C with loop attached into cross bar D until snug 5 Place lock washer B over end of nipple protruding through crossbar and thread hex nut A onto nippple until tight 6 Take this crossbar assembly and mount to ceiling junction box with junction box screws E Tighten screws securely with screwdriver 7 Use a pair of pliers to open one end link of the chain provided and connect to the fixture loop J Close the link RO proper hanging height Using pliers disconnect and discard remaining chain Lace the fixture wires through the chain 10 Slip loop collar H over the chain then do the same with the canopy G 11 Open the other end link of the chain and hang the fixture on the loop at the ceiling Close the link 12 Feed the fixture wires through the loop F and nipple C and pull until taut CONNECTING THE WIRES Fig 2 13 Take the black wire from the ceiling junction box and the smooth wire leg from the fixture and twist bare ends2. together Twist wire conncetor onto end of wires until snug 14 Repeat same process with white junction box wire and ribbed wire leg of fixture wire NOTE Twist wires together in the same direction you twist the wire connector onto wires 15 If your junction box has a grounding wire green or bare copper attach this wire and the bare copper wire from the fixture together as in step 13 If junction box has no ground wire attach the bare copper fixture wire to the junction box with a screw 16 Tuck these wire connections neatly into the ceiling outlet box and then raise the canopy G all the way to the ceiling Raise the loop collar H and thread onto ceiling loop protrud ing through canopy 17 Install the light bulbs in accordance with the fixture s specifications NOTE DO NOT EXCEED THE SPECIFIED WATTAGE Your installation is now complete Return power to the junction box and text the fixture E Fig 2 FIXTURE C D gt FIXTURE WIRES WIRES Green or Bare Copper Ground White Neutral e american lighting oy association LA 114E S
Download Pdf Manuals
Related Search