Minka Lavery 1005-44-PL Installation Guide
Contents
1. INSTALLATION INSTRUCTIONS For Model 1005 44 PL WARNING SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER CAUTION Turn off the main power at the circuit breaker before installing the fixture in order to prevent possible shock GENERAL All electrical connections must be in accordance with local and national electrical code N E C standards If you are unfamiliar with proper electrical wiring connections obtain the services of a qualified electrician Remove the fixture and the mounting package from the box and make sure that no parts are missing by referencing the illustrations on the installation instruction ASSEMBLY AND INSTALLATION 1 Turn off the power 2 Pull the Supply Wires 3 amp 4 and House Ground Wire 2 out from the Outlet Box 1 3 Install the Canopy 11 to the Outlet Box 1 by using two Mounting Screws 13 Note The side of the Canopy marked GND must face out 4 Position your fixture over the Outlet box 1 Mark the location of the four Slot Holes 14 located on the fixture body Remove the fixture body from the ceiling Drill the four holes 9 using the appropriately sized drill bit Insert the provided ceiling anchors 10 into the holes 5 Make the wiring connections Connect the House Ground Wire 2 to the Fixture Ground Wire 8 connect the White Supply Wire 3 to the White Fixture Wire 7 connect Black Supply Wire 4 to the Black Fixture Wire 5 using Wire Connectors 6 Carefully tuck all wires ba2. ck into the Outlet Box See Fig 3 6 Attach the Fixture Pan 22 to the Canopy 11 through the two Downward Screws 12 and tight it with two Nuts 15 7 Feed the four Anchor Screws 16 through the Slot Holes Tighten the Anchor Screws into the Ceiling Anchors until the Fixture Body is flush with the ceiling 8 Install the tube 18 Please follow the wattage label located on the fixture body Do not exceed the recommend wattage 9 Follow drawing 2 to install the Acrylic Lens 19 Hook the Clips 21 of the lens to the curve edge of the Fixture Pan 22 see Figure 2 INSTALLATION IS NOW COMPLETED Fig 3 FIXTURE WIRES Black or Smooth eb 1 OUTLET BOX 2 HOUSE GROUND WIRE 3 WHITE SUPPLY WIRE 4 BLACK SUPPLY WIRE 5 BLACK FIXTURE WIRE 6 WIRE CONNECTORS 7 WHITE FIXTURE WIRE 8 FIXTURE GROUND WIRE 9 DRILLED HOLES 10 ANCHORS 11 CANOPY FIXTURE WIRES White or Ribbed 12 DOWNWARD SCREW 13 MOUNTING SCREW 14 SLOT HOLES 15 NUTS 16 ANCHOR SCREWS 17 WIRE COVER 18 TUBE 19 ACRYLIC LENS 20 SCREW 21 CLIPS 22 FIXTURE PAN FIXTURE WIRES Bare opper Greund White Green Neutral Ground gt american lighting association Listed PDF created with pdfFactory Pro trial version www pdffactory com
Download Pdf Manuals
Related Search