Minka Lavery 5171-84 Instructions / Assembly
Contents
1. ED THE SPECIFIED WATTAGE NE PAS DEPASSER LA PUISSANCE Fig 2 NOMINALE MAXIMALE WIRES FIXTURE Black White or 4 Return the power to the junction box and test the Smooth 1 Ribbed fixture Your installation is now complete HOUSE WIRES Tit reen oi Neutral Neutral i Bare Copper Ground american C US EEA LISTED association2. INSTALLATION INSTRUCTION FOR 5171 For Wall Mount Light Fixtures WARNING SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER AVERTISSEMENT COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DUDISJONCTEUR READ AND SAVE THESE INSTRUCTIONS PREPARATION 1 Shut off the power at the fuse box or circuit breaker If necessary remove the old fixture including the mounting hardware 2 Carefully unpack your new fixture and lay out all a Set A 020 198112 the parts on a clear area Take care not to lose Hanging bracket any parts necessary for installation eae ae MOUNTING THE FIXTURE Fig 1 _Junetion box seraws s 3 Secure hanging bracket A to outlet box with junction box screws B Size 8 32 0 6 L The side of the hanging bracket marked GND must face out CONNECTING THE WIRES Fig 2 4 Connect the fixture wires to the junction box wires as shown in Fig 2 Make sure all wire connectors are secure If there is no green ground wire from the junction box connect the fixture ground wire to the circular strap with the green screw provided Tuck these wire connections neatly into the wall junction box COMPLETING THE INSTALLATION 5 Mount the mounting back plate D to hanging bracket A and then secure with mounting screws C Size 8 32 0 3 L 6 Place glass F over socket E then secure with socket ring G by wrench H 7 Install the light bulb 1 in accordance with the fixture s specifications DO NOT EXCE
Download Pdf Manuals
Related Search