Minka Lavery 4523-613 Instructions / Assembly
Contents
1. INSTALLATION INSTRUCTIONS item 4523 613 New 04 17 2013 READ AND SAVE THESE INSTRUCTIONS WARNING SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER MOUNTING THE FIXTURE Fig 1 4 Shut off the power at the fuse box or circuit breaker If necessary remove old fixture including the mounting hardware 2 Carefully remove the fixture from the carton and check that all parts are included as shown in the illustration 3 Attach mounting plate A to the junction box using the mounting screws B Size 8 32N L0 5 The side of the mounting plate marked GND must face out Raure SINT JgH f CONNECTING THE WIRES Fig 2 4 x4 BC 2 4 At this point connect the electrical we 2 SBC in Fig 2 making sure that all wire connectors are secured If your outlet box has a ground wire green or bare copper connect the fixture s ground wire to it Otherwise connect the fixture s _ ground wire directly to the mounting plate using the green screw provided After wires are connected tuck them carefully inside the junction box i a 5 AR uts E AIA FINISHING THE INSTALLATION Fig 1 x 5 Place fixture body C over the mounting plate A and secure with screws D Place the glass shade F over the socket E and secure with the socket ring G 7 Install the light bulb s not included in accordance with fixture specifications DO NOT EXCEED THE MAXIMUM WATTAGE RATING NE PAS DEPASSER LA PUISSANCE NOMINALE2. MAXIMALE _ D Your installation is now complete Return power and test the fixture Note Illustration Fig 1 on this manual is for installation purposes only It may or may not be identical to the fixture purchased wc tH boc aail xg AW Ww 2 38 HES LA 2318E C7 _ Glass By rl Socket ring SKT RING 26 FIXTURE iyw Set A 020 106108 Mounting Plate Ground Screw Mounting Screw 2 ux 4slgh LSK il i er f i Copper JB Gteung american lighting K x association Intertek INSTALLATION INSTRUCTIONS ltem 4523 613 New 04 17 2013 READ AND SAVE THESE INSTRUCTIONS WARNING SHUT POWER OFF AT FUSE OR CIRCUIT BREAKER AVERTISSEMENT COUPER LE COURANT AU NIVEAU DES FUSIBLES OU DU DISJONCTEUR MOUNTING THE FIXTURE Fig 1 ig 1 Shut off the power at the fuse box or circuit breaker If necessary remove old fixture including the mounting hardware 2 Carefully remove the fixture from the carton and Check that all parts are included as shown in the illustration 3 Attach mounting plate A to the junction box using the mounting screws B Size 8 32N L0 5 The side of the mounting plate marked GND must face out CONNECTING THE WIRES Fig 2 4 At this point connect the electrical wires as shown in Fig 2 making sure that all wire connectors are secured If your outlet box has a ground wire green or bare co
3. pper connect the fixture s Set A 020 106108 ground wire to it Otherwise connect the fixture s Mounting Plate ground wire directly to the mounting plate using Ground Screw the green screw provided After wires are Mounting Screw 2 connected tuck them carefully inside the junction box FINISHING THE INSTALLATION Fig 1 5 Place fixture body C over the mounting plate A and secure with screws D 6 Place the glass shade F over the socket E and secure with the socket ring G 7 Install the light bulb s not included in accordance with fixture specifications DO NOT Socket Ting SKT RING 26 _ FIXTURE WIRES EXCEED THE MAXIMUM WATTAGE RATING Smooth JNA tied fe Bes NE PAS DEPASSER LA PUISSANCE A je NOMINALE MAXIMALE Ny j Your installation is now complete Return power WIRES White i and test the fixture Neutra Note Illustration Fig 1 on this manual is for installation purposes only It may or may not be identical to the fixture purchased Eh american c us lighting A tage association rere Intertek LA 2318E
Download Pdf Manuals
Related Search